Since there will be some changes to how iio_priv_to_dev() is implemented,
it could be that the helper becomes a bit slower, as it will be hidden away
in the IIO core.
For this driver, the IIO device can be passed directly as a parameter to
the at91_ts_sample() function, thus making it immune to the change of
iio_priv_to_dev().
The function gets called in an interrupt context.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
drivers/iio/adc/at91_adc.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 0368b6dc6d60..5999defe47cd 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -287,13 +287,12 @@ static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
}
}
-static int at91_ts_sample(struct at91_adc_state *st)
+static int at91_ts_sample(struct iio_dev *idev, struct at91_adc_state *st)
{
unsigned int xscale, yscale, reg, z1, z2;
unsigned int x, y, pres, xpos, ypos;
unsigned int rxp = 1;
unsigned int factor = 1000;
- struct iio_dev *idev = iio_priv_to_dev(st);
unsigned int xyz_mask_bits = st->res;
unsigned int xyz_mask = (1 << xyz_mask_bits) - 1;
@@ -449,7 +448,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
if (status & AT91_ADC_ISR_PENS) {
/* validate data by pen contact */
- at91_ts_sample(st);
+ at91_ts_sample(idev, st);
} else {
/* triggered by event that is no pen contact, just read
* them to clean the interrupt and discard all.
--
2.17.1
