On Wed, 6 May 2020 16:03:21 -0700 Gwendal Grignou <gwendal@xxxxxxxxxxxx> wrote: > Add support for color light sensor presented by the Chromebook Embedded > Controller (EC). > Instead of just presenting lux measurement (clear channel), a color light > sensor is able to report color temperature measurement. > > The EC, using factory settings, can transform the raw measurement into > the CIE 1931 XYZ color space (XYZ) and take adavantage of color sensor > autocalibration to provide the most accurate measurements. v3 of series with v2 patches? Also my earlier comment about colour channels cannot be illuminance still stands. It is a term that "only" applies to light measurements with a particular frequency / sensitivity curve. The colour channels should all be in_intensity_xxx_raw. If you want to do the computation in driver to derive the illuminance that would be great, otherwise we shouldn't have any illuminance channels. Jonathan > > Gwendal Grignou (3): > iio: Add in_illumincance vectors in different color spaces > iio: cros_ec: Allow enabling/disabling calibration mode > iio: cros_ec_light: Add support for RGB sensor > > Documentation/ABI/testing/sysfs-bus-iio | 27 + > .../cros_ec_sensors/cros_ec_sensors_core.c | 3 +- > drivers/iio/light/cros_ec_light_prox.c | 469 +++++++++++++++--- > drivers/platform/chrome/cros_ec_sensorhub.c | 3 + > .../linux/iio/common/cros_ec_sensors_core.h | 1 - > .../linux/platform_data/cros_ec_commands.h | 14 +- > 6 files changed, 441 insertions(+), 76 deletions(-) >
