Three macros include SYNC in their names which is a typo. Update those names to SINC. Change suggested by Lars-Peter Clausen. Signed-off-by: Deepak R Varma <mh12gx2825@xxxxxxxxx> --- drivers/staging/iio/adc/ad7192.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 51b1cd3ad1de..a5b6cc1fc375 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -143,9 +143,9 @@ #define AD7192_EXT_FREQ_MHZ_MAX 5120000 #define AD7192_INT_FREQ_MHZ 4915200 -#define AD7192_NO_SYNC_FILTER 1 -#define AD7192_SYNC3_FILTER 3 -#define AD7192_SYNC4_FILTER 4 +#define AD7192_NO_SINC_FILTER 1 +#define AD7192_SINC3_FILTER 3 +#define AD7192_SINC4_FILTER 4 /* NOTE: * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. @@ -366,7 +366,7 @@ static int ad7192_setup(struct ad7192_state *st, struct device_node *np) st->conf |= AD7192_CONF_REFSEL; st->conf &= ~AD7192_CONF_CHOP; - st->f_order = AD7192_NO_SYNC_FILTER; + st->f_order = AD7192_NO_SINC_FILTER; buf_en = of_property_read_bool(np, "adi,buffer-enable"); if (buf_en) @@ -483,11 +483,11 @@ static void ad7192_get_available_filter_freq(struct ad7192_state *st, /* Formulas for filter at page 25 of the datasheet */ fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); + AD7192_SINC4_FILTER * AD7192_MODE_RATE(st->mode)); freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); + AD7192_SINC3_FILTER * AD7192_MODE_RATE(st->mode)); freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); @@ -575,25 +575,25 @@ static int ad7192_set_3db_filter_freq(struct ad7192_state *st, switch (idx) { case 0: - st->f_order = AD7192_SYNC4_FILTER; + st->f_order = AD7192_SINC4_FILTER; st->mode &= ~AD7192_MODE_SINC3; st->conf |= AD7192_CONF_CHOP; break; case 1: - st->f_order = AD7192_SYNC3_FILTER; + st->f_order = AD7192_SINC3_FILTER; st->mode |= AD7192_MODE_SINC3; st->conf |= AD7192_CONF_CHOP; break; case 2: - st->f_order = AD7192_NO_SYNC_FILTER; + st->f_order = AD7192_NO_SINC_FILTER; st->mode &= ~AD7192_MODE_SINC3; st->conf &= ~AD7192_CONF_CHOP; break; case 3: - st->f_order = AD7192_NO_SYNC_FILTER; + st->f_order = AD7192_NO_SINC_FILTER; st->mode |= AD7192_MODE_SINC3; st->conf &= ~AD7192_CONF_CHOP; -- 2.17.1