> > On Mon, 7 Oct 2019 11:43:36 +0200 > Lorenzo Bianconi <lorenzo@xxxxxxxxxx> wrote: > > > Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on > > the same register map used by LSM9DS1 > I'm feeling paranoid. Is this definitely different form the > LSM6DSO which is already supported? > > If so ST loose for stupid part naming. Yes, it is very different..AFAIK LSM6DSO is last IMU sensor from ST while LSM6DS0 is very old (it has the same register map used in LSM9DS1 imu). Regards, Lorenzo > > Jonathan > > > > > Lorenzo Bianconi (2): > > iio: imu: st_lsm6dsx: add support to LSM6DS0 > > dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings > > > > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > > drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ > > 6 files changed, 18 insertions(+), 2 deletions(-) > > >
