This patchset adds a IIO driver for the Bosch BMA400 3-axes ultra low-power accelerometer. The initial implementation of the driver adds read support for the acceleration and temperature data registers. The driver also has support for reading and writing to the output data rate, oversampling ratio, and scale configuration registers. A huge thanks to the reviewers of the first version of the patchet! Cheers, - Dan Changes in v2: * Implemented iio_info -> read_avail * Stylistic changes * Implemented devicetree bindings Dan Robertson (2): dt-bindings: iio: accel: bma400: add bindings iio: (bma400) add driver for the BMA400 .../devicetree/bindings/iio/accel/bma400.txt | 16 + drivers/iio/accel/Kconfig | 19 + drivers/iio/accel/Makefile | 2 + drivers/iio/accel/bma400.h | 86 ++ drivers/iio/accel/bma400_core.c | 839 ++++++++++++++++++ drivers/iio/accel/bma400_i2c.c | 58 ++ 6 files changed, 1020 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/bma400.txt create mode 100644 drivers/iio/accel/bma400.h create mode 100644 drivers/iio/accel/bma400_core.c create mode 100644 drivers/iio/accel/bma400_i2c.c