The following changes since commit b33f56a1e40588214320926293585f088fb390b0: staging: rtl8723bs: hal: remove redundant variable n (2019-09-06 18:20:33 +0200) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.4a for you to fetch changes up to a26e0fbe06e20077afdaa40d1a90092f16b0bc67: iio: Fix an undefied reference error in noa1305_probe (2019-10-09 19:11:29 +0100) ---------------------------------------------------------------- First set of IIO fixes for the 5.4 cycle. * adis16400 - Make sure to free memory on a few failure paths. * adxl372 - Fix wrong fifo depth - Fix wrong indexing of data from the fifo. - Perform a reset at startup to avoid a problem with inconsistent state. * axp288 - This is a fix for a fix. The original fix made sure we kept the configuration from some firmwares to preserve a bias current. Unfortunately it appears the previous behaviour was working around a buggy firmware by overwriting the wrong value it had. Hence a regression was seen. * bmc150 - Fix the centre temperature. This was due to an error in one of the datasheets. * hx711 - Fix an issue where a badly timed interrupt could lead to a control line being high long enough to put the device into a low power state. * meson_sar_adc - Fix a case where the irq was enabled before everything it uses was allocated. * st_lsm6dsx - Ensure we don't set the sensor sensitivity to 0 as it will force all readings to 0. - Fix a wait time for the slave i2c controller when the accelerometer is not enabled. * stm32-adc - Precursor for fix. Move a set of register definitions to a header. - Fix a race when several ADCs are in use with some using interrupts to control the dataflow and some using DMA. * vcnl4000 - Fix a garbage of_match_table in which a string was passed instead of the intended enum. ---------------------------------------------------------------- Andreas Klinger (1): iio: adc: hx711: fix bug in sampling of data David Frey (1): iio: light: opt3001: fix mutex unlock race Fabrice Gasnier (2): iio: adc: stm32-adc: move registers definitions iio: adc: stm32-adc: fix a race when using several adcs with dma and irq Hans de Goede (1): iio: adc: axp288: Override TS pin bias current for some models Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller Marco Felsch (3): iio: light: fix vcnl4000 devicetree hooks iio: light: add missing vcnl4040 of_compatible iio: adc: ad799x: fix probe error handling Navid Emamdoost (2): iio: imu: adis16400: release allocated memory on failure iio: imu: adis16400: fix memory leak Pascal Bouwmann (1): iio: fix center temperature of bmc150-accel-core Remi Pommarel (1): iio: adc: meson_saradc: Fix memory allocation order Stefan Popa (3): iio: accel: adxl372: Fix/remove limitation for FIFO samples iio: accel: adxl372: Fix push to buffers lost samples iio: accel: adxl372: Perform a reset at start up zhong jiang (1): iio: Fix an undefied reference error in noa1305_probe drivers/iio/accel/adxl372.c | 22 ++++- drivers/iio/accel/bmc150-accel-core.c | 2 +- drivers/iio/adc/ad799x.c | 4 +- drivers/iio/adc/axp288_adc.c | 32 +++++++ drivers/iio/adc/hx711.c | 10 +- drivers/iio/adc/meson_saradc.c | 10 +- drivers/iio/adc/stm32-adc-core.c | 70 ++++++++------ drivers/iio/adc/stm32-adc-core.h | 137 +++++++++++++++++++++++++++ drivers/iio/adc/stm32-adc.c | 109 --------------------- drivers/iio/imu/adis_buffer.c | 10 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 28 ++++-- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 15 ++- drivers/iio/light/Kconfig | 1 + drivers/iio/light/opt3001.c | 6 +- drivers/iio/light/vcnl4000.c | 14 ++- 16 files changed, 290 insertions(+), 182 deletions(-)
