Hi Ardelean, On 7 October 2019 3:51:16 PM IST, "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx> wrote: >On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote: >> [External] >> >> Add devicetree binding for Analog Devices ADUX1020 Photometric >> sensor. >> > >Hey, > >Thanks for the patches. > >This dt-binding docs is in text format. >dt-binding docs now need to be in YAML format. > Sure. I can convert to YAML binding. >Also, patches for dt-bindings docs usually come after the driver is >added. >So, this patch should be the second in the series, not the first. > I don't think so. The convention is to put dt-bindings patch upfront for all subsystems. Not sure if IIO differs here. Thanks, Mani >Alex > >> Signed-off-by: Manivannan Sadhasivam ><manivannan.sadhasivam@xxxxxxxxxx> >> --- >> .../bindings/iio/light/adux1020.txt | 22 >+++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/iio/light/adux1020.txt >> >> diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt >> b/Documentation/devicetree/bindings/iio/light/adux1020.txt >> new file mode 100644 >> index 000000000000..e896dda30e36 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt >> @@ -0,0 +1,22 @@ >> +Analog Devices ADUX1020 Photometric sensor >> + >> +Link to datasheet: >> >https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf >> + >> +Required properties: >> + >> + - compatible: should be "adi,adux1020" >> + - reg: the I2C address of the sensor >> + >> +Optional properties: >> + >> + - interrupts: interrupt mapping for IRQ as documented in >> + >Documentation/devicetree/bindings/interrupt-controller/interrupts.txt >> + >> +Example: >> + >> +adux1020@64 { >> + compatible = "adi,adux1020"; >> + reg = <0x64>; >> + interrupt-parent = <&msmgpio>; >> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; >> +}; -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
