Move bdu, boot and reset register definitions in hw_settings register
map since not all supported sensors (e.g lsm9ds1) rely on the same
definitions
Fixes: 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1")
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 8 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 113 +++++++++++++++----
2 files changed, 99 insertions(+), 22 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 8e002a51595e..5692ea695f04 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -236,7 +236,9 @@ struct st_lsm6dsx_ext_dev_settings {
/**
* struct st_lsm6dsx_settings - ST IMU sensor settings
* @wai: Sensor WhoAmI default value.
- * @reset_addr: register address for reset/reboot
+ * @reset: register address for reset.
+ * @boot: register address for boot.
+ * @bdu: register address for Block Data Update.
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
* @channels: IIO channels supported by the device.
@@ -251,7 +253,9 @@ struct st_lsm6dsx_ext_dev_settings {
*/
struct st_lsm6dsx_settings {
u8 wai;
- u8 reset_addr;
+ struct st_lsm6dsx_reg reset;
+ struct st_lsm6dsx_reg boot;
+ struct st_lsm6dsx_reg bdu;
u16 max_fifo_size;
struct {
enum st_lsm6dsx_hw_id hw_id;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index a598cc8e9343..5df382b9d8f9 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -62,10 +62,6 @@
#include "st_lsm6dsx.h"
#define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f
-#define ST_LSM6DSX_REG_RESET_MASK BIT(0)
-#define ST_LSM6DSX_REG_BOOT_MASK BIT(7)
-#define ST_LSM6DSX_REG_BDU_ADDR 0x12
-#define ST_LSM6DSX_REG_BDU_MASK BIT(6)
static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
@@ -91,7 +87,18 @@ static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x68,
- .reset_addr = 0x22,
+ .reset = {
+ .addr = 0x22,
+ .mask = BIT(0),
+ },
+ .boot = {
+ .addr = 0x22,
+ .mask = BIT(7),
+ },
+ .bdu = {
+ .addr = 0x22,
+ .mask = BIT(6),
+ },
.max_fifo_size = 32,
.id = {
{
@@ -177,7 +184,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x69,
- .reset_addr = 0x12,
+ .reset = {
+ .addr = 0x12,
+ .mask = BIT(0),
+ },
+ .boot = {
+ .addr = 0x12,
+ .mask = BIT(7),
+ },
+ .bdu = {
+ .addr = 0x12,
+ .mask = BIT(6),
+ },
.max_fifo_size = 1365,
.id = {
{
@@ -328,7 +346,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x69,
- .reset_addr = 0x12,
+ .reset = {
+ .addr = 0x12,
+ .mask = BIT(0),
+ },
+ .boot = {
+ .addr = 0x12,
+ .mask = BIT(7),
+ },
+ .bdu = {
+ .addr = 0x12,
+ .mask = BIT(6),
+ },
.max_fifo_size = 682,
.id = {
{
@@ -479,7 +508,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6a,
- .reset_addr = 0x12,
+ .reset = {
+ .addr = 0x12,
+ .mask = BIT(0),
+ },
+ .boot = {
+ .addr = 0x12,
+ .mask = BIT(7),
+ },
+ .bdu = {
+ .addr = 0x12,
+ .mask = BIT(6),
+ },
.max_fifo_size = 682,
.id = {
{
@@ -643,7 +683,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6c,
- .reset_addr = 0x12,
+ .reset = {
+ .addr = 0x12,
+ .mask = BIT(0),
+ },
+ .boot = {
+ .addr = 0x12,
+ .mask = BIT(7),
+ },
+ .bdu = {
+ .addr = 0x12,
+ .mask = BIT(6),
+ },
.max_fifo_size = 512,
.id = {
{
@@ -800,7 +851,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
- .reset_addr = 0x12,
+ .reset = {
+ .addr = 0x12,
+ .mask = BIT(0),
+ },
+ .boot = {
+ .addr = 0x12,
+ .mask = BIT(7),
+ },
+ .bdu = {
+ .addr = 0x12,
+ .mask = BIT(6),
+ },
.max_fifo_size = 512,
.id = {
{
@@ -951,7 +1013,18 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
- .reset_addr = 0x12,
+ .reset = {
+ .addr = 0x12,
+ .mask = BIT(0),
+ },
+ .boot = {
+ .addr = 0x12,
+ .mask = BIT(7),
+ },
+ .bdu = {
+ .addr = 0x12,
+ .mask = BIT(6),
+ },
.max_fifo_size = 512,
.id = {
{
@@ -1778,27 +1851,27 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
int err;
/* device sw reset */
- err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
- ST_LSM6DSX_REG_RESET_MASK,
- FIELD_PREP(ST_LSM6DSX_REG_RESET_MASK, 1));
+ reg = &hw->settings->reset;
+ err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+ ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
if (err < 0)
return err;
msleep(50);
/* reload trimming parameter */
- err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
- ST_LSM6DSX_REG_BOOT_MASK,
- FIELD_PREP(ST_LSM6DSX_REG_BOOT_MASK, 1));
+ reg = &hw->settings->boot;
+ err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+ ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
if (err < 0)
return err;
msleep(50);
/* enable Block Data Update */
- err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_BDU_ADDR,
- ST_LSM6DSX_REG_BDU_MASK,
- FIELD_PREP(ST_LSM6DSX_REG_BDU_MASK, 1));
+ reg = &hw->settings->bdu;
+ err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+ ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
if (err < 0)
return err;
--
2.21.0
