On Wed, Sep 25, 2019 at 07:49:27PM -0400, William Breathitt Gray wrote:
> On Wed, Sep 18, 2019 at 02:22:03PM +0200, Fabrice Gasnier wrote:
> > Fix the following warning when documentation is built:
> > drivers/counter/stm32-timer-cnt.c:37: warning: cannot understand function
> > prototype: 'enum stm32_count_function'
> >
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
> > ---
> > drivers/counter/stm32-timer-cnt.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
> > index 644ba18..e425dd1 100644
> > --- a/drivers/counter/stm32-timer-cnt.c
> > +++ b/drivers/counter/stm32-timer-cnt.c
> > @@ -28,7 +28,7 @@ struct stm32_timer_cnt {
> > };
> >
> > /**
> > - * stm32_count_function - enumerates stm32 timer counter encoder modes
> > + * enum stm32_count_function - enumerates stm32 timer counter encoder modes
> > * @STM32_COUNT_SLAVE_MODE_DISABLED: counts on internal clock when CEN=1
> > * @STM32_COUNT_ENCODER_MODE_1: counts TI1FP1 edges, depending on TI2FP2 level
> > * @STM32_COUNT_ENCODER_MODE_2: counts TI2FP2 edges, depending on TI1FP1 level
> > --
> > 2.7.4
>
> Fixes: 597f55e3f36c ("counter: stm32-lptimer: add counter device")
>
> Jonathan, please pick this fix up through IIO.
>
> Thanks,
>
> William Breathitt Gray
Sorry, that's the wrong Fixes line. Here's the right one:
Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder")
William Breathitt Gray
