The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.
The iio_triggered_buffer_postenable() should be called before (to attach
the poll func) and then the
The iio_triggered_buffer_predisable() function is hooked directly without
anything, which is probably fine, as the postenable() version seems to also
do some reset/wake-up of the device.
This will mean it will be easier when removing it; i.e. it just gets
removed.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
drivers/iio/pressure/zpa2326.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
index 9d0d07930236..99dfe33ee402 100644
--- a/drivers/iio/pressure/zpa2326.c
+++ b/drivers/iio/pressure/zpa2326.c
@@ -1243,6 +1243,11 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
const struct zpa2326_private *priv = iio_priv(indio_dev);
int err;
+ /* Plug our own trigger event handler. */
+ err = iio_triggered_buffer_postenable(indio_dev);
+ if (err)
+ goto err;
+
if (!priv->waken) {
/*
* We were already power supplied. Just clear hardware FIFO to
@@ -1250,7 +1255,7 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
*/
err = zpa2326_clear_fifo(indio_dev, 0);
if (err)
- goto err;
+ goto err_buffer_predisable;
}
if (!iio_trigger_using_own(indio_dev) && priv->waken) {
@@ -1260,16 +1265,13 @@ static int zpa2326_postenable_buffer(struct iio_dev *indio_dev)
*/
err = zpa2326_config_oneshot(indio_dev, priv->irq);
if (err)
- goto err;
+ goto err_buffer_predisable;
}
- /* Plug our own trigger event handler. */
- err = iio_triggered_buffer_postenable(indio_dev);
- if (err)
- goto err;
-
return 0;
+err_buffer_predisable:
+ iio_triggered_buffer_predisable(indio_dev);
err:
zpa2326_err(indio_dev, "failed to enable buffering (%d)", err);
--
2.20.1
