> Hello Lorenzo and Martin,
Hi Bobby,
LSM9DS1 does not support hw FIFO for the moment. Are you trying to enable
buffered reading?
Could you please try if the following patch helps? (just compiled)
Regards,
Lorenzo
iio: imu: st_lsm6dsx: do not configure the fifo if not supported
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b65a6ca775e0..90a0e5ce44e5 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1572,7 +1572,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
return err;
}
- if (hw->irq > 0) {
+ if (hw->irq > 0 && hw->settings->fifo_ops.update_fifo) {
err = st_lsm6dsx_fifo_setup(hw);
if (err < 0)
return err;
--
2.21.0
>
> I'm testing the LSM9DS1 support recently added to the st_lsm6dsx
> iio/imu driver and I'm encountering a device tree problem related to
> interrupt config.
>
> Here's the exception I'm seeing:
> [ 4.172529] irq 277: nobody cared (try booting with the "irqpoll" option)
> [ 4.179341] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
> 5.3.0-rc5-00322-g792b824-dirty #7
> [ 4.187359] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> [ 4.193920] [<c0112750>] (unwind_backtrace) from [<c010d018>]
> (show_stack+0x10/0x14)
> [ 4.201690] [<c010d018>] (show_stack) from [<c0c2bfc8>]
> (dump_stack+0xd8/0x10c)
> [ 4.209027] [<c0c2bfc8>] (dump_stack) from [<c01923fc>]
> (__report_bad_irq+0x24/0xc0)
> [ 4.216793] [<c01923fc>] (__report_bad_irq) from [<c0192820>]
> (note_interrupt+0x27c/0x2dc)
> [ 4.225078] [<c0192820>] (note_interrupt) from [<c018f174>]
> (handle_irq_event_percpu+0x54/0x7c)
> [ 4.233793] [<c018f174>] (handle_irq_event_percpu) from
> [<c018f1d4>] (handle_irq_event+0x38/0x5c)
> [ 4.242681] [<c018f1d4>] (handle_irq_event) from [<c0193664>]
> (handle_level_irq+0xc8/0x154)
> [ 4.251051] [<c0193664>] (handle_level_irq) from [<c018df58>]
> (generic_handle_irq+0x20/0x34)
> [ 4.259510] [<c018df58>] (generic_handle_irq) from [<c053c348>]
> (mxc_gpio_irq_handler+0xc4/0xf8)
> [ 4.268313] [<c053c348>] (mxc_gpio_irq_handler) from [<c053c3e0>]
> (mx3_gpio_irq_handler+0x64/0xb8)
> [ 4.277287] [<c053c3e0>] (mx3_gpio_irq_handler) from [<c018df58>]
> (generic_handle_irq+0x20/0x34)
> [ 4.286089] [<c018df58>] (generic_handle_irq) from [<c018e550>]
> (__handle_domain_irq+0x64/0xe0)
> [ 4.294810] [<c018e550>] (__handle_domain_irq) from [<c0529610>]
> (gic_handle_irq+0x4c/0xa0)
> [ 4.303181] [<c0529610>] (gic_handle_irq) from [<c0101a70>]
> (__irq_svc+0x70/0x98)
> [ 4.310675] Exception stack(0xc1301f10 to 0xc1301f58)
> [ 4.315744] 1f00: 00000001
> 00000006 00000000 c130c340
> [ 4.323937] 1f20: c1300000 c1308928 00000001 c1308960 00000000
> c12b9db0 c1308908 00000000
> [ 4.332128] 1f40: 00000000 c1301f60 c0182010 c0109508 20000013 ffffffff
> [ 4.338762] [<c0101a70>] (__irq_svc) from [<c0109508>]
> (arch_cpu_idle+0x20/0x3c)
> [ 4.346180] [<c0109508>] (arch_cpu_idle) from [<c015ed70>]
> (do_idle+0x1bc/0x2bc)
> [ 4.353594] [<c015ed70>] (do_idle) from [<c015f204>]
> (cpu_startup_entry+0x18/0x1c)
> [ 4.361183] [<c015f204>] (cpu_startup_entry) from [<c1200e68>]
> (start_kernel+0x440/0x504)
> [ 4.369378] [<c1200e68>] (start_kernel) from [<00000000>] (0x0)
> [ 4.375309] handlers:
> [ 4.377645] [<62052c0d>] st_lsm6dsx_handler_irq threaded
> [<f2004b92>] st_lsm6dsx_handler_thread
> [ 4.386484] Disabling IRQ #277
>
> Here is the associated device tree node:
> lsm9ds1_ag@6a {
> compatible = "st,lsm9ds1-imu";
> reg = <0x6a>;
> st,drdy-int-pin = <1>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_acc_gyro>;
> interrupt-parent = <&gpio7>;
> interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
> };
>
> Let me know if I can provide any more information.
>
> Thanks,
> Bobby Jones
Attachment:
signature.asc
Description: PGP signature
