This change replaces indio_dev's mlock with the driver's own lock. The lock is mostly needed to protect state when changing the `config` & `dac_cache` fields. As such, the lock has been extended to covert the read of these fields. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- drivers/iio/dac/ad7303.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c index 8de9f40226e6..f45352e80db7 100644 --- a/drivers/iio/dac/ad7303.c +++ b/drivers/iio/dac/ad7303.c @@ -41,6 +41,7 @@ struct ad7303_state { struct regulator *vdd_reg; struct regulator *vref_reg; + struct mutex lock; /* * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. @@ -62,9 +63,13 @@ static ssize_t ad7303_read_dac_powerdown(struct iio_dev *indio_dev, uintptr_t private, const struct iio_chan_spec *chan, char *buf) { struct ad7303_state *st = iio_priv(indio_dev); + int val; - return sprintf(buf, "%d\n", (bool)(st->config & - AD7303_CFG_POWER_DOWN(chan->channel))); + mutex_lock(&st->lock); + val = (bool)(st->config & AD7303_CFG_POWER_DOWN(chan->channel)); + mutex_unlock(&st->lock); + + return sprintf(buf, "%d\n", val); } static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev, @@ -79,7 +84,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev, if (ret) return ret; - mutex_lock(&indio_dev->mlock); + mutex_lock(&st->lock); if (pwr_down) st->config |= AD7303_CFG_POWER_DOWN(chan->channel); @@ -90,7 +95,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev, * mode, so just write one of the DAC channels again */ ad7303_write(st, chan->channel, st->dac_cache[chan->channel]); - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); return len; } @@ -116,7 +121,9 @@ static int ad7303_read_raw(struct iio_dev *indio_dev, switch (info) { case IIO_CHAN_INFO_RAW: + mutex_lock(&st->lock); *val = st->dac_cache[chan->channel]; + mutex_unlock(&st->lock); return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: vref_uv = ad7303_get_vref(st, chan); @@ -144,11 +151,11 @@ static int ad7303_write_raw(struct iio_dev *indio_dev, if (val >= (1 << chan->scan_type.realbits) || val < 0) return -EINVAL; - mutex_lock(&indio_dev->mlock); + mutex_lock(&st->lock); ret = ad7303_write(st, chan->address, val); if (ret == 0) st->dac_cache[chan->channel] = val; - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); break; default: ret = -EINVAL; @@ -211,6 +218,8 @@ static int ad7303_probe(struct spi_device *spi) st->spi = spi; + mutex_init(&st->lock); + st->vdd_reg = devm_regulator_get(&spi->dev, "Vdd"); if (IS_ERR(st->vdd_reg)) return PTR_ERR(st->vdd_reg); -- 2.20.1