[PATCH 1/3] iio: adc: ad799x: fix probe error handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe
and reset alert status on probe") the error path is wrong since it
leaves the vref regulator on. Fix this by disabling both regulators.

Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and
reset alert status on probe")
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
 drivers/iio/adc/ad799x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 5a3ca5904ded..f658012baad8 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -810,10 +810,10 @@ static int ad799x_probe(struct i2c_client *client,
 
 	ret = ad799x_write_config(st, st->chip_config->default_config);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	ret = ad799x_read_config(st);
 	if (ret < 0)
-		goto error_disable_reg;
+		goto error_disable_vref;
 	st->config = ret;
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
-- 
2.20.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux