On Tue, 10 Sep 2019 17:43:32 +0300
Stefan Popa <stefan.popa@xxxxxxxxxx> wrote:
> Currently, the driver sets the FIFO_SAMPLES register with the number of
> sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
> single axis). However, the FIFO_SAMPLES register should store the number
> of samples, regardless of how the FIFO format is configured.
>
> Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx>
Fixes tags? I think it's
Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support")
Check I got that right though.
One trivial inline that I have tidied up whilst applying.
Applied to the fixes-togreg branch of iio.git.
Thanks,
Jonathan
> ---
> Changes in v2:
> - st->watermark needs to store the number of sample sets,
> the total number of samples is computed in
> adxl372_configure_fifo() func.
>
> drivers/iio/accel/adxl372.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
> index 055227cb..7de5e1b 100644
> --- a/drivers/iio/accel/adxl372.c
> +++ b/drivers/iio/accel/adxl372.c
> @@ -474,12 +474,17 @@ static int adxl372_configure_fifo(struct adxl372_state *st)
> if (ret < 0)
> return ret;
>
> - fifo_samples = st->watermark & 0xFF;
> + /*
> + * watermak stores the number of sets; we need to write the FIFO
watermark
> + * registers with the number of samples
> + */
> + fifo_samples = (st->watermark * st->fifo_set_size);
> fifo_ctl = ADXL372_FIFO_CTL_FORMAT_MODE(st->fifo_format) |
> ADXL372_FIFO_CTL_MODE_MODE(st->fifo_mode) |
> - ADXL372_FIFO_CTL_SAMPLES_MODE(st->watermark);
> + ADXL372_FIFO_CTL_SAMPLES_MODE(fifo_samples);
>
> - ret = regmap_write(st->regmap, ADXL372_FIFO_SAMPLES, fifo_samples);
> + ret = regmap_write(st->regmap,
> + ADXL372_FIFO_SAMPLES, fifo_samples & 0xFF);
> if (ret < 0)
> return ret;
>
