On Wed, 11 Sep 2019 14:37:16 +0200
Sean Nyekjaer <sean@xxxxxxxxxx> wrote:
> On 11/09/2019 08.50, Lorenzo Bianconi wrote:
> > Enable clear on read feature for latched interrupts. This bit allows
> > immediately clearing the latched interrupts of an event detection upon
> > the read of the corresponding status register.
> > It must be set to 1 together with LIR.
> > This feature is available just on LSM6DS0/LSM6DSR/ASM330LHH
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> Tested-by: Sean Nyekjaer <sean@xxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.
Thanks,
Jonathan
> > ---
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 24 ++++++++++++++++++++
> > 2 files changed, 26 insertions(+)
> >
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > index 3ea0dc13d101..fefd9042590a 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> > @@ -216,6 +216,7 @@ struct st_lsm6dsx_ext_dev_settings {
> > * @decimator: List of decimator register info (addr + mask).
> > * @batch: List of FIFO batching register info (addr + mask).
> > * @lir: Latched interrupt register info (addr + mask).
> > + * @clear_on_read: Clear on read register info (addr + mask).
> > * @fifo_ops: Sensor hw FIFO parameters.
> > * @ts_settings: Hw timer related settings.
> > * @shub_settings: i2c controller related settings.
> > @@ -239,6 +240,7 @@ struct st_lsm6dsx_settings {
> > struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
> > struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
> > struct st_lsm6dsx_reg lir;
> > + struct st_lsm6dsx_reg clear_on_read;
> > struct st_lsm6dsx_fifo_ops fifo_ops;
> > struct st_lsm6dsx_hw_ts_settings ts_settings;
> > struct st_lsm6dsx_shub_settings shub_settings;
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index a208da865efe..b65a6ca775e0 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -601,6 +601,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x56,
> > .mask = BIT(0),
> > },
> > + .clear_on_read = {
> > + .addr = 0x56,
> > + .mask = BIT(6),
> > + },
> > .fifo_ops = {
> > .update_fifo = st_lsm6dsx_update_fifo,
> > .read_fifo = st_lsm6dsx_read_tagged_fifo,
> > @@ -735,6 +739,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x56,
> > .mask = BIT(0),
> > },
> > + .clear_on_read = {
> > + .addr = 0x56,
> > + .mask = BIT(6),
> > + },
> > .fifo_ops = {
> > .update_fifo = st_lsm6dsx_update_fifo,
> > .read_fifo = st_lsm6dsx_read_tagged_fifo,
> > @@ -846,6 +854,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> > .addr = 0x56,
> > .mask = BIT(0),
> > },
> > + .clear_on_read = {
> > + .addr = 0x56,
> > + .mask = BIT(6),
> > + },
> > .fifo_ops = {
> > .update_fifo = st_lsm6dsx_update_fifo,
> > .read_fifo = st_lsm6dsx_read_tagged_fifo,
> > @@ -1449,6 +1461,18 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
> > hw->settings->lir.mask, data);
> > if (err < 0)
> > return err;
> > +
> > + /* enable clear on read for latched interrupts */
> > + if (hw->settings->clear_on_read.addr) {
> > + data = ST_LSM6DSX_SHIFT_VAL(1,
> > + hw->settings->clear_on_read.mask);
> > + err = regmap_update_bits(hw->regmap,
> > + hw->settings->clear_on_read.addr,
> > + hw->settings->clear_on_read.mask,
> > + data);
> > + if (err < 0)
> > + return err;
> > + }
> > }
> >
> > err = st_lsm6dsx_init_shub(hw);
> >
