On Sat, 9 Mar 2019 01:14:21 +0000 Denis CIOCCA <denis.ciocca@xxxxxx> wrote: > Acked-by: Denis Ciocca <denis.ciocca@xxxxxx> Applied with the minor tweak to drop the -accel postfix. Thanks, Jonathan > > Thanks, > Denis > > -----Original Message----- > From: linux-iio-owner@xxxxxxxxxxxxxxx <linux-iio-owner@xxxxxxxxxxxxxxx> On Behalf Of Robert Jones > Sent: Tuesday, March 5, 2019 12:33 PM > To: Jonathan Cameron <jic23@xxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx; Hartmut Knaack <knaack.h@xxxxxx>; Lars-Peter Clausen <lars@xxxxxxxxxx>; Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>; Robert Jones <rjones@xxxxxxxxxxxxx> > Subject: [PATCH 2/2] iio: accel: add support to LIS2DE12 > > Add support to STMicroelectronics LIS2DE12 accelerometer in st_accel framework. > > http://www.st.com/resource/en/datasheet/lis2de12.pdf > > Signed-off-by: Robert Jones <rjones@xxxxxxxxxxxxx> > --- > drivers/iio/accel/Kconfig | 2 +- > drivers/iio/accel/st_accel.h | 2 ++ > drivers/iio/accel/st_accel_core.c | 76 +++++++++++++++++++++++++++++++++++++++ > drivers/iio/accel/st_accel_i2c.c | 5 +++ > 4 files changed, 84 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 898839c..ffd0b4d 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -223,7 +223,7 @@ config IIO_ST_ACCEL_3AXIS > Say yes here to build support for STMicroelectronics accelerometers: > LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, > LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL, > - LNG2DM, LIS3DE > + LNG2DM, LIS3DE, LIS2DE12 > > This driver can also be built as a module. If so, these modules > will be created: > diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h index fd53258..753a5671 100644 > --- a/drivers/iio/accel/st_accel.h > +++ b/drivers/iio/accel/st_accel.h > @@ -34,6 +34,7 @@ enum st_accel_type { > LIS3LV02DL, > LIS2DW12, > LIS3DHH, > + LIS2DE12, > ST_ACCEL_MAX, > }; > > @@ -57,6 +58,7 @@ enum st_accel_type { > #define LIS2DW12_ACCEL_DEV_NAME "lis2dw12" > #define LIS3DHH_ACCEL_DEV_NAME "lis3dhh" > #define LIS3DE_ACCEL_DEV_NAME "lis3de" > +#define LIS2DE12_ACCEL_DEV_NAME "lis2de12_accel" > > /** > * struct st_sensors_platform_data - default accel platform data diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c > index 9930edf..aebd611 100644 > --- a/drivers/iio/accel/st_accel_core.c > +++ b/drivers/iio/accel/st_accel_core.c > @@ -831,6 +831,82 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { > .multi_read_bit = false, > .bootime = 2, > }, > + { > + .wai = 0x33, > + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, > + .sensors_supported = { > + [0] = LIS2DE12_ACCEL_DEV_NAME, > + }, > + .ch = (struct iio_chan_spec *)st_accel_8bit_channels, > + .odr = { > + .addr = 0x20, > + .mask = 0xf0, > + .odr_avl = { > + { .hz = 1, .value = 0x01, }, > + { .hz = 10, .value = 0x02, }, > + { .hz = 25, .value = 0x03, }, > + { .hz = 50, .value = 0x04, }, > + { .hz = 100, .value = 0x05, }, > + { .hz = 200, .value = 0x06, }, > + { .hz = 400, .value = 0x07, }, > + { .hz = 1600, .value = 0x08, }, > + { .hz = 5376, .value = 0x09, }, > + }, > + }, > + .pw = { > + .addr = 0x20, > + .mask = 0xf0, > + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, > + }, > + .enable_axis = { > + .addr = ST_SENSORS_DEFAULT_AXIS_ADDR, > + .mask = ST_SENSORS_DEFAULT_AXIS_MASK, > + }, > + .fs = { > + .addr = 0x23, > + .mask = 0x30, > + .fs_avl = { > + [0] = { > + .num = ST_ACCEL_FS_AVL_2G, > + .value = 0x00, > + .gain = IIO_G_TO_M_S_2(15600), > + }, > + [1] = { > + .num = ST_ACCEL_FS_AVL_4G, > + .value = 0x01, > + .gain = IIO_G_TO_M_S_2(31200), > + }, > + [2] = { > + .num = ST_ACCEL_FS_AVL_8G, > + .value = 0x02, > + .gain = IIO_G_TO_M_S_2(62500), > + }, > + [3] = { > + .num = ST_ACCEL_FS_AVL_16G, > + .value = 0x03, > + .gain = IIO_G_TO_M_S_2(187500), > + }, > + }, > + }, > + .bdu = { > + .addr = 0x23, > + .mask = 0x80, > + }, > + .drdy_irq = { > + .addr = 0x22, > + .mask_int1 = 0x10, > + .mask_int2 = 0x00, > + .addr_ihl = 0x25, > + .mask_ihl = 0x02, > + .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR, > + }, > + .sim = { > + .addr = 0x23, > + .value = BIT(0), > + }, > + .multi_read_bit = true, > + .bootime = 2, > + }, > }; > > static int st_accel_read_raw(struct iio_dev *indio_dev, diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c > index de8ae43..cb6eb6f 100644 > --- a/drivers/iio/accel/st_accel_i2c.c > +++ b/drivers/iio/accel/st_accel_i2c.c > @@ -102,6 +102,10 @@ static const struct of_device_id st_accel_of_match[] = { > .compatible = "st,lis3de", > .data = LIS3DE_ACCEL_DEV_NAME, > }, > + { > + .compatible = "st,lis2de12-accel", > + .data = LIS2DE12_ACCEL_DEV_NAME, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, st_accel_of_match); @@ -140,6 +144,7 @@ static const struct i2c_device_id st_accel_id_table[] = { > { LIS3LV02DL_ACCEL_DEV_NAME }, > { LIS2DW12_ACCEL_DEV_NAME }, > { LIS3DE_ACCEL_DEV_NAME }, > + { LIS2DE12_ACCEL_DEV_NAME }, > {}, > }; > MODULE_DEVICE_TABLE(i2c, st_accel_id_table); > -- > 2.9.2 >
