[PATCH v5 01/11] staging: iio: ad7780: add gain & filter gpio support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Previously, the AD7780 driver only supported gpio for the 'powerdown'
pin. This commit adds suppport for the 'gain' and 'filter' pin.

Signed-off-by: Renato Lui Geh <renatogeh@xxxxxxxxx>
Signed-off-by: Giuliano Belinassi <giuliano.belinassi@xxxxxx>
Co-developed-by: Giuliano Belinassi <giuliano.belinassi@xxxxxx>
---
Changes in v3:
- Renamed ad7780_chip_info's filter to odr
- Renamed ad778x_filter to ad778x_odr_avail
- Changed vref variable from unsigned int to unsigned long long to avoid
  overflow
- Removed unnecessary AD_SD_CHANNEL macro
Changes in v4:
- Removed useless macro
- Added default case for switch to suppress warning
- Removed chunks belonging to filter reading, adding these as a
  patch for itself
Changes in v5:
- ad778x_odr_avail moved to filter patch
- Split gain reading to its own patch
- Init GPIOs in a separate function

drivers/staging/iio/adc/ad7780.c | 114 ++++++++++++++++++++++++++-----
1 file changed, 96 insertions(+), 18 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index c4a85789c2db..07e5e35c92a3 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -39,6 +39,9 @@
#define AD7170_PATTERN		(AD7780_PAT0 | AD7170_PAT2)
#define AD7170_PATTERN_MASK	(AD7780_PAT0 | AD7780_PAT1 | AD7170_PAT2)

+#define AD7780_GAIN_MIDPOINT	64
+#define AD7780_FILTER_MIDPOINT	13350
+
struct ad7780_chip_info {
	struct iio_chan_spec	channel;
	unsigned int		pattern_mask;
@@ -50,7 +53,10 @@ struct ad7780_state {
	const struct ad7780_chip_info	*chip_info;
	struct regulator		*reg;
	struct gpio_desc		*powerdown_gpio;
-	unsigned int	gain;
+	struct gpio_desc		*gain_gpio;
+	struct gpio_desc		*filter_gpio;
+	unsigned int			gain;
+	unsigned int			int_vref_mv;

	struct ad_sigma_delta sd;
};
@@ -104,8 +110,10 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
		voltage_uv = regulator_get_voltage(st->reg);
		if (voltage_uv < 0)
			return voltage_uv;
-		*val = (voltage_uv / 1000) * st->gain;
+		voltage_uv /= 1000;
+		*val = voltage_uv * st->gain;
		*val2 = chan->scan_type.realbits - 1;
+		st->int_vref_mv = voltage_uv;
		return IIO_VAL_FRACTIONAL_LOG2;
	case IIO_CHAN_INFO_OFFSET:
		*val = -(1 << (chan->scan_type.realbits - 1));
@@ -115,6 +123,50 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
	return -EINVAL;
}

+static int ad7780_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long m)
+{
+	struct ad7780_state *st = iio_priv(indio_dev);
+	const struct ad7780_chip_info *chip_info = st->chip_info;
+	unsigned long long vref;
+	unsigned int full_scale, gain;
+
+	if (!chip_info->is_ad778x)
+		return -EINVAL;
+
+	switch (m) {
+	case IIO_CHAN_INFO_SCALE:
+		if (val != 0)
+			return -EINVAL;
+
+		vref = st->int_vref_mv * 1000000LL;
+		full_scale = 1 << (chip_info->channel.scan_type.realbits - 1);
+		gain = DIV_ROUND_CLOSEST(vref, full_scale);
+		gain = DIV_ROUND_CLOSEST(gain, val2);
+		st->gain = gain;
+		if (gain < AD7780_GAIN_MIDPOINT)
+			gain = 0;
+		else
+			gain = 1;
+		gpiod_set_value(st->gain_gpio, gain);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (1000*val + val2/1000 < AD7780_FILTER_MIDPOINT)
+			val = 0;
+		else
+			val = 1;
+		gpiod_set_value(st->filter_gpio, val);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
				     unsigned int raw_sample)
{
@@ -125,13 +177,6 @@ static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
	    ((raw_sample & chip_info->pattern_mask) != chip_info->pattern))
		return -EIO;

-	if (chip_info->is_ad778x) {
-		if (raw_sample & AD7780_GAIN)
-			st->gain = 1;
-		else
-			st->gain = 128;
-	}
-
	return 0;
}

@@ -173,8 +218,47 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {

static const struct iio_info ad7780_info = {
	.read_raw = ad7780_read_raw,
+	.write_raw = ad7780_write_raw,
};

+static int ad7780_init_gpios(struct device *dev, struct ad7780_state *st)
+{
+	int ret;
+
+	st->powerdown_gpio = devm_gpiod_get_optional(dev,
+						     "powerdown",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(st->powerdown_gpio)) {
+		ret = PTR_ERR(st->powerdown_gpio);
+		dev_err(dev, "Failed to request powerdown GPIO: %d\n", ret);
+		return ret;
+	}
+
+	if (!st->chip_info->is_ad778x)
+		return 0;
+
+
+	st->gain_gpio = devm_gpiod_get_optional(dev,
+						"adi,gain",
+						GPIOD_OUT_HIGH);
+	if (IS_ERR(st->gain_gpio)) {
+		ret = PTR_ERR(st->gain_gpio);
+		dev_err(dev, "Failed to request gain GPIO: %d\n", ret);
+		return ret;
+	}
+
+	st->filter_gpio = devm_gpiod_get_optional(dev,
+						  "adi,filter",
+						  GPIOD_OUT_HIGH);
+	if (IS_ERR(st->filter_gpio)) {
+		ret = PTR_ERR(st->filter_gpio);
+		dev_err(dev, "Failed to request filter GPIO: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
static int ad7780_probe(struct spi_device *spi)
{
	struct ad7780_state *st;
@@ -212,15 +296,9 @@ static int ad7780_probe(struct spi_device *spi)
	indio_dev->num_channels = 1;
	indio_dev->info = &ad7780_info;

-	st->powerdown_gpio = devm_gpiod_get_optional(&spi->dev,
-						     "powerdown",
-						     GPIOD_OUT_LOW);
-	if (IS_ERR(st->powerdown_gpio)) {
-		ret = PTR_ERR(st->powerdown_gpio);
-		dev_err(&spi->dev, "Failed to request powerdown GPIO: %d\n",
-			ret);
-		goto error_disable_reg;
-	}
+	ret = ad7780_init_gpios(&spi->dev, st);
+	if (ret)
+		goto error_cleanup_buffer_and_trigger;

	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
	if (ret)
--
2.21.0




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux