Hi,
Sorry about the delay, being traveling and other stuff to do, but
here goes v3.
This series introduce a NXP fxas21002c tri axis gyroscope driver [0]
It add a core implementaiton plus an i2c and spi.
This device can be found in the warp7 board [1], where it was tested.
---
Cheers,
Rui
v2->v3:
Jonathan Cameron:
- cacheline aligned (DMA safe buffer)
Great presentation [2] and links in the presentation, thanks
- global renaming, including filenames, fxas2100x->fxas21002c
- provide spi info in dts bidings
- Remove SPI_MASTER in Kconfig i2c patch and move it to right patch
- remove extra blank line in comment
- add break range_value_from_fs after found
- in range_value_from_fs use local variable
- remove mode check at mode_set
- combine two if statements in mode_set
- in scale_get return 0 and let caller to set IIO_VAL_FRACTIONAL
- remove dev_err from vdd_io regulator get
- handle regulator error path
- devm_add_action
- check unwind order
- simplify data in _suspend and alike
- disable regulators at suspend
- error handling at _resume
- return -EAGAIN at runtime_resume
Rob Herring:
- Set label as gyroscope
- add interrupt to bindings
- add entry to maintainers
v1->v2:
Peter Meerwal-Stadler:
- changed (c) to current year
- add regmap include file in .h
- fix comments s/cuttof/cutoff/
- add more info in mutex comment
- check value in range_fs_from_value
- ret not checked in range_value_from_fs
- move mode to enum type
- remove line between value get and validation of value in all file
- pre-write, regmap_field_write, post_write refactoring
- check val2 and val == 0 in write raw
- check in_anglvel_scale: 7.8125?
- trigger_handler: 2 => sizeof(s16)
- check buffer size
- print %02% to output chip id
- remove !! as state is bool
- trigger probe return devm_iio_trigger_register
- remove error msg in case of devm_iio_device_register
Fabio Estebam:
- rename FXAS2100X to FXAS21002
- change compatible nxp,fxas2100x to the exact support
- add VDD and VDDIO regulators in bindings and driver
[0]: https://www.nxp.com/docs/en/data-sheet/FXAS21002.pdf
[1]: https://www.element14.com/community/community/designcenter/single-board-computers/warp7/overview
[2]: https://events.linuxfoundation.org/wp-content/uploads/2017/12/20181023-Wolfram-Sang-ELCE18-safe_dma_buffers.pdf
Rui Miguel Silva (6):
iio: gyro: add DT bindings to fxas21002c
iio: gyro: add core driver for fxas21002c
iio: gyro: fxas21002c: add i2c driver
iio: gyro: fxas21002c: add spi driver
ARM: dts: imx7s-warp: add fxas21002c gyroscope
MAINTAINERS: add entry for fxas21002c gyro driver
.../bindings/iio/gyroscope/nxp,fxas21002c.txt | 26 +
MAINTAINERS | 10 +
arch/arm/boot/dts/imx7s-warp.dts | 7 +
drivers/iio/gyro/Kconfig | 22 +
drivers/iio/gyro/Makefile | 3 +
drivers/iio/gyro/fxas21002c.h | 151 +++
drivers/iio/gyro/fxas21002c_core.c | 989 ++++++++++++++++++
drivers/iio/gyro/fxas21002c_i2c.c | 73 ++
drivers/iio/gyro/fxas21002c_spi.c | 69 ++
9 files changed, 1350 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
create mode 100644 drivers/iio/gyro/fxas21002c.h
create mode 100644 drivers/iio/gyro/fxas21002c_core.c
create mode 100644 drivers/iio/gyro/fxas21002c_i2c.c
create mode 100644 drivers/iio/gyro/fxas21002c_spi.c
--
2.20.1
