On Thu, 7 Mar 2019 11:34:07 +0100
Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx> wrote:
> This explains the new generic property "thermocouple-type" that
> can be used with temperature sensors.
>
> Signed-off-by: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
I'm happy with this, but want to allow time for Rob and other
devicetree types to have a look at it as well.
Give me a poke if this is looking unloved in a week or so.
Thanks,
Jonathan
> ---
> Changes v6
> - Add this file
> ---
> .../bindings/iio/temperature/temperature-bindings.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
> new file mode 100644
> index 000000000000..69a6441d8083
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
> @@ -0,0 +1,11 @@
> +If the temperature sensor device can be configured to use some specific
> +thermocouple type, you can use the defined types provided in the file
> +"include/dt-bindings/iio/temperature/thermocouple.h".
> +
> +Optional property:
> +thermocouple-type: The type of the thermocouple used by the device.
> +
> +For example:
> + device {
> + thermocouple-type = <THERMOCOUPLE_TYPE_K> ;
> + };
