[PATCH v2 2/4] dt-bindings: maxbotix,i2cxl: Add MaxBotix i2c ultrasonic rangers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add doc for dt binding maxbotix,i2cxl. This binding is for MaxBotix
I2CXL-MaxSonar ultrasonic rangers which share a common i2c interface.

Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx>
---
 .../bindings/iio/proximity/maxbotix,i2cxl.txt       | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt

diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt b/Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
new file mode 100644
index 000000000000..528f428fc583
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
@@ -0,0 +1,21 @@
+* MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type mb12x2 using
+  the i2c interface for ranging
+
+Required properties:
+ - compatible:		Should be "maxbotix,i2cxl"
+
+ - reg:			i2c address of the device
+
+Optional properties:
+ - status-gpios:	Status gpio (input) used to announce the preceding
+			reading request has finished and that data is
+			available. If no status gpio is specified the
+			device driver falls back to wait until data can be
+			retrieved.
+
+Example:
+proximity@70 {
+	compatible = "maxbotix,i2cxl";
+	reg = <0x70>;
+	status-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+};
-- 
2.11.0



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux