Adds a device tree binding for the ad7780 driver. Signed-off-by: Renato Lui Geh <renatogeh@xxxxxxxxx> --- .../bindings/iio/adc/adi,ad7780.txt | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt new file mode 100644 index 000000000000..440e52555349 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt @@ -0,0 +1,48 @@ +* Analog Devices AD7170/AD7171/AD7780/AD7781 + +Data sheets: + +- AD7170: + * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf +- AD7171: + * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf +- AD7780: + * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf +- AD7781: + * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf + +Required properties: + +- compatible: should be one of + * "adi,ad7170" + * "adi,ad7171" + * "adi,ad7780" + * "adi,ad7781" +- reg: spi chip select number for the device +- vref-supply: the regulator supply for the ADC reference voltage + +Optional properties: + +- powerdown-gpios: must be the device tree identifier of the PDRST pin. If + specified, it will be asserted during driver probe. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. +- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for + the ad778x chips. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. +- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only + for the ad778x chips. If specified, it will be asserted + during driver probe. As the line is active low, it should be + marked GPIO_ACTIVE_LOW. + +Example: + +adc@0 { + compatible = "adi,ad7780"; + reg = <0>; + vref-supply = <&vdd_supply> + + powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; +}; -- 2.21.0
