[PATCH v4 2/9] staging: iio: ad7780: add filter reading to ad778x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds the new feature of reading the filter odr value for
ad778x chips. This value is stored in the chip's state struct whenever a
read or write call is performed on the chip's driver.

This feature requires sharing SAMP_FREQ. Since the ad717x does not have
a filter option, the driver only shares the relevant info mask for the
ad778x family.

Signed-off-by: Renato Lui Geh <renatogeh@xxxxxxxxx>
---
Changes in v4:
- As mentioned in the previous patch, this was originally as part of
  the 'add gain & filter gpio support' patch

drivers/staging/iio/adc/ad7780.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index 87fbcf510d45..7a68e90ddf14 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -59,6 +59,7 @@ struct ad7780_state {
	struct gpio_desc		*gain_gpio;
	struct gpio_desc		*filter_gpio;
	unsigned int			gain;
+	unsigned int			odr;
	unsigned int			int_vref_mv;

	struct ad_sigma_delta sd;
@@ -121,6 +122,9 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
	case IIO_CHAN_INFO_OFFSET:
		*val = -(1 << (chan->scan_type.realbits - 1));
		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = st->odr;
+		return IIO_VAL_INT;
	default:
	break;
	}
@@ -163,6 +167,7 @@ static int ad7780_write_raw(struct iio_dev *indio_dev,
			val = 0;
		else
			val = 1;
+		st->odr = ad778x_odr_avail[val];
		gpiod_set_value(st->filter_gpio, val);
		break;
	default:
@@ -184,6 +189,7 @@ static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,

	if (chip_info->is_ad778x) {
		st->gain = ad778x_gain[raw_sample & AD7780_GAIN];
+		st->odr = ad778x_odr_avail[raw_sample & AD7780_FILTER];
	}

	return 0;
@@ -196,17 +202,19 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = {
};

#define AD7780_CHANNEL(bits, wordsize) \
+	AD_SD_CHANNEL(1, 0, 0, bits, 32, wordsize - bits)
+#define AD7170_CHANNEL(bits, wordsize) \
	AD_SD_CHANNEL_NO_SAMP_FREQ(1, 0, 0, bits, 32, wordsize - bits)

static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
	[ID_AD7170] = {
-		.channel = AD7780_CHANNEL(12, 24),
+		.channel = AD7170_CHANNEL(12, 24),
		.pattern = AD7170_PATTERN,
		.pattern_mask = AD7170_PATTERN_MASK,
		.is_ad778x = false,
	},
	[ID_AD7171] = {
-		.channel = AD7780_CHANNEL(16, 24),
+		.channel = AD7170_CHANNEL(16, 24),
		.pattern = AD7170_PATTERN,
		.pattern_mask = AD7170_PATTERN_MASK,
		.is_ad778x = false,
--
2.21.0




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux