On Thu, 21 Feb 2019 18:02:47 +0100
"H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx> wrote:
> From: Linus Walleij <linus.walleij@xxxxxxxxxx>
>
> The mounting matrix for sensors was introduced in
> commit dfc57732ad38 ("iio:core: mounting matrix support")
>
> However the device tree bindings are very terse and since this is
> a widely applicable property, we need a proper binding for it
> that the other bindings can reference. This will also be useful
> for other operating systems and sensor engineering at large.
>
> I think all 3D sensors should support it, the current situation
> is probably that the mounting information is confined in magic
> userspace components rather than using the mounting matrix, which
> is not good for portability and reuse.
>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
> Cc: Samu Onkalo <samu.onkalo@xxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/iio/mount-matrix.txt | 204 ++++++++++++++++++
> 1 file changed, 204 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/mount-matrix.txt
So forgive me, but I have to ask: what are the chances of getting this
file in RST format? It's 99% of the way there now, finishing the job
would allow it to be integrated into our docs tree.
It should probably have an SPDX line too.
Thanks,
jon
