Makefile and Kconfig: add configuration for mb12x2 ultrasonic proximity driver Signed-off-by: Andreas Klinger <ak@xxxxxxxxxxxxx> --- drivers/iio/proximity/Kconfig | 11 +++++++++++ drivers/iio/proximity/Makefile | 1 + 2 files changed, 12 insertions(+) diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig index b99367a89f81..5d57ca44e30d 100644 --- a/drivers/iio/proximity/Kconfig +++ b/drivers/iio/proximity/Kconfig @@ -45,6 +45,17 @@ config LIDAR_LITE_V2 To compile this driver as a module, choose M here: the module will be called pulsedlight-lite-v2 +config MB12X2 + tristate "MaxSonar MB12X2 family ultrasonic sensors" + depends on I2C + help + Say Y to build a driver for the ultrasonic sensors of MaxSonar + with i2c interface. It can be used to measure the distance of + objects. + + To compile this driver as a module, choose M here: the + module will be called mb12x2. + config RFD77402 tristate "RFD77402 ToF sensor" depends on I2C diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile index 6d031f903c4c..c56b72a8be87 100644 --- a/drivers/iio/proximity/Makefile +++ b/drivers/iio/proximity/Makefile @@ -6,6 +6,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_AS3935) += as3935.o obj-$(CONFIG_ISL29501) += isl29501.o +obj-$(CONFIG_MB12X2) += mb12x2.o obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o obj-$(CONFIG_RFD77402) += rfd77402.o obj-$(CONFIG_SRF04) += srf04.o -- 2.11.0
