Replace use of the operation '<<' by the BIT macro. Solves checkpath.pl's message: CHECK: Prefer using the BIT macro Signed-off-by: Bárbara Fernandes <barbara.fernandes@xxxxxx> --- drivers/iio/adc/ad7923.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c index ebae7522710a..b39ea834cdd6 100644 --- a/drivers/iio/adc/ad7923.c +++ b/drivers/iio/adc/ad7923.c @@ -24,9 +24,9 @@ #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> -#define AD7923_WRITE_CR (1 << 11) /* write control register */ -#define AD7923_RANGE (1 << 1) /* range to REFin */ -#define AD7923_CODING (1 << 0) /* coding is straight binary */ +#define AD7923_WRITE_CR BIT(11) /* write control register */ +#define AD7923_RANGE BIT(1) /* range to REFin */ +#define AD7923_CODING BIT(0) /* coding is straight binary */ #define AD7923_PM_MODE_AS (1) /* auto shutdown */ #define AD7923_PM_MODE_FS (2) /* full shutdown */ #define AD7923_PM_MODE_OPS (3) /* normal operation */ -- 2.17.1
