The following changes since commit c2f4dd4364b71ef4eb43925b402377aefe9c1ca0:
staging: wlan-ng: formatting change in cfg80211.c (2019-02-08 10:31:14 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.1b
for you to fetch changes up to 103cda6a3b8d2c10d5f8cd7abad118e9db8f4776:
iio: adc: exynos-adc: Use proper number of channels for Exynos4x12 (2019-02-12 20:56:00 +0000)
----------------------------------------------------------------
Second set of new device support, features and cleanup for IIO in the 5.1 cycle.
There are a few late breaking fixes in here that weren't worth trying to
rush into 5.0 as they have been with us for quite a while.
New device support
* ad7476
- add support for TI ADS786X parts that are compatible with this Analog
Devices driver. Good to see some simple devices are so similar.
* Ingenic jz47xx SoC ADCs
- new driver and bindings
* Plantower PMS7003 partical sensor
- new driver and bindings including vendor prefix.
* TI DAC7612
- new driver and bindings for this dual DAC.
New features
* ad7768-1
- Sampling frequency control
* bmi160
- Data ready trigger support, including open-drain dt binding.
Cleanup / minor fixes.
* Analog Device DACs
- Fix some inconsistent licenses. These are only ones where there were
two different license marked in the same file, and hence were previously
unclear.
* ads124s08
- Spelling fix.
* adxl345
- Parameter alignement tidy up.
* bmi160
- SPDX
- correct a note on the types of supported interrupts which was too strict.
- use iio_pollfunc_store_time to grab an earlier timestamp.
- use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
some handling where ret was effectively getting written to 0 even though
it was always already 0.
* exynos_adc
- Fix a null pointer dereference on unbind.
- Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
* lpc32xx-adc
- Move DT bindings doc out of staging. Oops, I missed this one when
moving the driver.
- SPDX.
* npcm-adc
- drop documentation of reset node as going to be done differently.
It's a new driver this cycle so no need to support the previous
binding going forwards.
* sps30
- Fix an issue with a loop timeout test that meant it would never identify
a timeout.
- Mark deliberate switch fall throughs.
----------------------------------------------------------------
Artur Rojek (3):
dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.
dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.
IIO: add Ingenic JZ47xx ADC driver.
Colin Ian King (1):
iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions"
Dan Carpenter (1):
iio: chemical: sps30: fix a loop timeout test
Gregory CLEMENT (2):
dt-bindings: iio: adc: move lpc32xx-adc out of staging
iio:adc:lpc32xx use SPDX-License-Identifier
Jonathan Cameron (1):
iio:chemical:sps30 Supress some switch fallthrough warnings.
Krzysztof Kozlowski (2):
iio: adc: exynos-adc: Fix NULL pointer exception on unbind
iio: adc: exynos-adc: Use proper number of channels for Exynos4x12
Luciana da Costa Marques (1):
iio:accel:adxl345: Change alignment to match paranthesis
Martin Kelly (6):
iio:bmi160: add SPDX identifiers
iio:bmi160: add drdy interrupt support
dt-bindings: fix incorrect bmi160 IRQ note
dt-bindings: bmi160 document open-drain property
iio:bmi160: use iio_pollfunc_store_time
iio:bmi160: use if (ret) instead of if (ret < 0)
Ricardo Ribalda Delgado (3):
iio: adc: ad7476: Add support for TI ADS786X ADCs
iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
iio:dac:dac7612: device tree bindings
Stefan Popa (2):
drivers: iio: dac: Fix wrong license for ADI drivers
iio: adc: ad7768-1: Add support for setting the sampling frequency
Tomasz Duszynski (3):
iio: chemical: add support for Plantower PMS7003 sensor
dt-bindings: add Plantower to the vendor prefixes
dt-bindings: iio: chemical: pms7003: add device tree support
Tomer Maimon (1):
dt-binding: iio: remove rst node from NPCM ADC document
.../devicetree/bindings/iio/adc/ingenic,adc.txt | 48 +++
.../bindings/{staging => }/iio/adc/lpc32xx-adc.txt | 0
.../bindings/iio/adc/nuvoton,npcm-adc.txt | 11 -
.../bindings/iio/adc/samsung,exynos-adc.txt | 4 +-
.../bindings/iio/chemical/plantower,pms7003.txt | 20 ++
.../devicetree/bindings/iio/dac/ti,dac7612.txt | 28 ++
.../devicetree/bindings/iio/imu/bmi160.txt | 6 +-
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 7 +
drivers/iio/accel/adxl345_core.c | 4 +-
drivers/iio/adc/Kconfig | 20 +-
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad7476.c | 20 ++
drivers/iio/adc/ad7768-1.c | 202 +++++++++++-
drivers/iio/adc/exynos_adc.c | 19 +-
drivers/iio/adc/ingenic-adc.c | 364 +++++++++++++++++++++
drivers/iio/adc/lpc32xx_adc.c | 15 +-
drivers/iio/adc/ti-ads124s08.c | 8 +-
drivers/iio/chemical/Kconfig | 10 +
drivers/iio/chemical/Makefile | 1 +
drivers/iio/chemical/pms7003.c | 340 +++++++++++++++++++
drivers/iio/chemical/sps30.c | 5 +-
drivers/iio/dac/Kconfig | 10 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ad5686-spi.c | 2 +-
drivers/iio/dac/ad5686.c | 2 +-
drivers/iio/dac/ad5686.h | 2 +-
drivers/iio/dac/ad5696-i2c.c | 2 +-
drivers/iio/dac/ad5758.c | 2 +-
drivers/iio/dac/ti-dac7612.c | 184 +++++++++++
drivers/iio/imu/bmi160/bmi160.h | 11 +
drivers/iio/imu/bmi160/bmi160_core.c | 317 ++++++++++++++++--
drivers/iio/imu/bmi160/bmi160_i2c.c | 5 +-
drivers/iio/imu/bmi160/bmi160_spi.c | 4 +-
include/dt-bindings/iio/adc/ingenic,adc.h | 10 +
35 files changed, 1601 insertions(+), 85 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
rename Documentation/devicetree/bindings/{staging => }/iio/adc/lpc32xx-adc.txt (100%)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
create mode 100644 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
create mode 100644 drivers/iio/adc/ingenic-adc.c
create mode 100644 drivers/iio/chemical/pms7003.c
create mode 100644 drivers/iio/dac/ti-dac7612.c
create mode 100644 include/dt-bindings/iio/adc/ingenic,adc.h
