Re: [PATCH 2/2] staging: iio: frequency: ad9834: Move phase and scale to standard iio attribute

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 6 Feb 2019 14:05:42 +0200
Beniamin Bia <biabeniamin@xxxxxxxxxxx> wrote:

> The custom phase and scale attributes were moved to standard iio types.
> 
> Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
Similar comments apply as to patch 1.

Jonathan
> ---
>  drivers/staging/iio/frequency/ad9834.c | 54 +++++++++++++++-----------
>  1 file changed, 32 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
> index 370e8263899e..3ecf976ddefe 100644
> --- a/drivers/staging/iio/frequency/ad9834.c
> +++ b/drivers/staging/iio/frequency/ad9834.c
> @@ -30,8 +30,7 @@
>  
>  #define AD9834_REG_CMD		0
>  #define AD9834_REG_FREQ(chann)	(BIT(14) << (chann))
> -#define AD9834_REG_PHASE0	(BIT(15) | BIT(14))
> -#define AD9834_REG_PHASE1	(BIT(15) | BIT(14) | BIT(13))
> +#define AD9834_REG_PHASE(chann)	(BIT(15) | BIT(14) | ((chann) << 13UL))
>  
>  /* Command Control Bits */
>  
> @@ -82,6 +81,8 @@ struct ad9834_state {
>  
>  	unsigned long			frequency0;
>  	unsigned long			frequency1;
> +	unsigned long			phase0;
> +	unsigned long			phase1;
>  
>  	/*
>  	 * DMA (thus cache coherency maintenance) requires the
> @@ -109,6 +110,8 @@ enum ad9834_supported_device_ids {
>  		.address = (_chan),					\
>  		.channel = (_chan),					\
>  		.info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY)	\
> +						| BIT(IIO_CHAN_INFO_PHASE),\
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
>  }
>  
>  static const struct iio_chan_spec ad9833_channels[] = {
> @@ -164,11 +167,22 @@ static int ad9834_write_frequency(struct ad9834_state *st,
>  static int ad9834_write_phase(struct ad9834_state *st,
>  			      unsigned long addr, unsigned long phase)
>  {
> +	int ret;
> +
>  	if (phase > BIT(AD9834_PHASE_BITS))
>  		return -EINVAL;
> -	st->data = cpu_to_be16(addr | phase);
> +	st->data = cpu_to_be16(AD9834_REG_PHASE(addr) | phase);
> +
> +	ret = spi_sync(st->spi, &st->msg);
> +	if (ret)
> +		return ret;
>  
> -	return spi_sync(st->spi, &st->msg);
> +	if (addr == 0)
> +		st->phase0 = phase;
> +	else
> +		st->phase1 = phase;
> +
> +	return 0;
>  }
>  
>  static int ad9834_read_raw(struct iio_dev *indio_dev,
> @@ -184,6 +198,16 @@ static int ad9834_read_raw(struct iio_dev *indio_dev,
>  		else
>  			*val = st->frequency1;
>  		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_PHASE:
> +		if (chan->address == 0)
> +			*val = st->phase0;
> +		else
> +			*val = st->phase1;
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		/*1 hz */
> +		*val = 1;
> +		return IIO_VAL_INT;
>  	}
>  
>  	return -EINVAL;
> @@ -198,6 +222,8 @@ static int ad9834_write_raw(struct iio_dev *indio_dev,
>  	switch (mask) {
>  	case IIO_CHAN_INFO_FREQUENCY:
>  		return ad9834_write_frequency(st, chan->address, val);
> +	case IIO_CHAN_INFO_PHASE:
> +		return ad9834_write_phase(st, chan->address, val);
>  	default:
>  		return  -EINVAL;
>  	}
> @@ -222,10 +248,6 @@ static ssize_t ad9834_write(struct device *dev,
>  
>  	mutex_lock(&st->lock);
>  	switch ((u32)this_attr->address) {
> -	case AD9834_REG_PHASE0:
> -	case AD9834_REG_PHASE1:
> -		ret = ad9834_write_phase(st, this_attr->address, val);
> -		break;
>  	case AD9834_OPBITEN:
>  		if (st->control & AD9834_MODE) {
>  			ret = -EINVAL;  /* AD9843 reserved mode */
> @@ -385,12 +407,8 @@ static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, 0444,
>   */
>  
>  static IIO_DEV_ATTR_FREQSYMBOL(0, 0200, NULL, ad9834_write, AD9834_FSEL);
> -static IIO_CONST_ATTR_FREQ_SCALE(0, "1"); /* 1Hz */
>  
> -static IIO_DEV_ATTR_PHASE(0, 0, 0200, NULL, ad9834_write, AD9834_REG_PHASE0);
> -static IIO_DEV_ATTR_PHASE(0, 1, 0200, NULL, ad9834_write, AD9834_REG_PHASE1);
>  static IIO_DEV_ATTR_PHASESYMBOL(0, 0200, NULL, ad9834_write, AD9834_PSEL);
> -static IIO_CONST_ATTR_PHASE_SCALE(0, "0.0015339808"); /* 2PI/2^12 rad*/
>  
>  static IIO_DEV_ATTR_PINCONTROL_EN(0, 0200, NULL,
>  	ad9834_write, AD9834_PIN_SW);
> @@ -401,10 +419,6 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0);
>  static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
>  
>  static struct attribute *ad9834_attributes[] = {
> -	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> -	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> -	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> -	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
>  	&iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
>  	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
>  	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
> @@ -418,10 +432,6 @@ static struct attribute *ad9834_attributes[] = {
>  };
>  
>  static struct attribute *ad9833_attributes[] = {
> -	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> -	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> -	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> -	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
>  	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
>  	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
>  	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
> @@ -545,11 +555,11 @@ static int ad9834_probe(struct spi_device *spi)
>  	if (ret)
>  		goto error_clock_unprepare;
>  
> -	ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
> +	ret = ad9834_write_phase(st, 0, 512);
>  	if (ret)
>  		goto error_clock_unprepare;
>  
> -	ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
> +	ret = ad9834_write_phase(st, 1, 1024);
Similar comments. Nicer to use an enum for this and name them.

>  	if (ret)
>  		goto error_clock_unprepare;
>  




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux