On Thu, 2 Aug 2018 20:19:00 -0400
Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:
> This patch adds device tree bindings for the tsl2772 ALS / proximity
> sensor for the LG Nexus 5 (hammerhead) phone.
>
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
Acked-by: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
The precursors are working their way through the iio tree, but
it will be the next merge window before they go upstream.
Thanks,
Jonathan
> ---
> .../qcom-msm8974-lge-nexus5-hammerhead.dts | 27 +++++++++++++++++++
> arch/arm/boot/dts/qcom-msm8974.dtsi | 11 ++++++++
> 2 files changed, 38 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index 928affae1885..ed8f064d0895 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -242,6 +242,15 @@
> };
> };
>
> + i2c3_pins: i2c3 {
> + mux {
> + pins = "gpio10", "gpio11";
> + function = "blsp_i2c3";
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> i2c12_pins: i2c12 {
> mux {
> pins = "gpio87", "gpio88";
> @@ -333,6 +342,24 @@
> };
> };
> };
> +
> + i2c@f9925000 {
> + status = "ok";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3_pins>;
> + clock-frequency = <100000>;
> + qcom,src-freq = <50000000>;
> +
> + avago_apds993@39 {
> + compatible = "avago,apds9930";
> + reg = <0x39>;
> + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
> + vdd-supply = <&pm8941_l17>;
> + vddio-supply = <&pm8941_lvs1>;
> + led-max-microamp = <100000>;
> + amstaos,proximity-diodes = <0>;
> + };
> + };
> };
>
> &spmi_bus {
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index cebb6ae9143a..6dcf2bee66fb 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -713,6 +713,17 @@
> #size-cells = <0>;
> };
>
> + blsp_i2c3: i2c@f9925000 {
> + status = "disabled";
> + compatible = "qcom,i2c-qup-v2.1.1";
> + reg = <0xf9925000 0x1000>;
> + interrupts = <0 97 IRQ_TYPE_NONE>;
> + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> blsp_i2c8: i2c@f9964000 {
> status = "disabled";
> compatible = "qcom,i2c-qup-v2.1.1";
