Hi Stefan, On Fri, Aug 10, 2018 at 11:46:18AM +0300, Stefan Popa wrote: > This patch adds basic support for Analog Devices ADXL372 SPI-Bus > Three-Axis Digital Accelerometer. > > The device is probed and configured the with some initial default > values. With this basic driver, it is possible to read raw acceleration > data. > > Datasheet: > http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdf > > Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> > --- > MAINTAINERS | 6 + > drivers/iio/accel/Kconfig | 11 + > drivers/iio/accel/Makefile | 1 + > drivers/iio/accel/adxl372.c | 525 ++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 543 insertions(+) > create mode 100644 drivers/iio/accel/adxl372.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 60b1028..2ba47bb 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -543,6 +543,12 @@ W: http://ez.analog.com/community/linux-device-drivers > S: Supported > F: drivers/input/misc/adxl34x.c > > +ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER > +M: Stefan Popa <stefan.popa@xxxxxxxxxx> > +W: http://ez.analog.com/community/linux-device-drivers > +S: Supported > +F: drivers/iio/accel/adxl372.c > + > AF9013 MEDIA DRIVER > M: Antti Palosaari <crope@xxxxxx> > L: linux-media@xxxxxxxxxxxxxxx > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index 62ae7e5..1b496ef 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -60,6 +60,17 @@ config ADXL345_SPI > will be called adxl345_spi and you will also get adxl345_core > for the core module. > > +config ADXL372 > + tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver" > + depends on SPI > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + help > + Say yes here to add support for the Analog Devices ADXL372 triaxial > + acceleration sensor. > + To compile this driver as a module, choose M here: the > + module will be called adxl372. > + > config BMA180 > tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" > depends on I2C > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > index 636d4d1..5758ffc 100644 > --- a/drivers/iio/accel/Makefile > +++ b/drivers/iio/accel/Makefile > @@ -9,6 +9,7 @@ obj-$(CONFIG_ADIS16209) += adis16209.o > obj-$(CONFIG_ADXL345) += adxl345_core.o > obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o > obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o > +obj-$(CONFIG_ADXL372) += adxl372.o > obj-$(CONFIG_BMA180) += bma180.o > obj-$(CONFIG_BMA220) += bma220_spi.o > obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o > diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c > new file mode 100644 > index 0000000..db9ecd2 > --- /dev/null > +++ b/drivers/iio/accel/adxl372.c > @@ -0,0 +1,525 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* The SPDX identifier "GPL-2.0+" is "GPL v2 or later", and the MODULE_LICENSE "GPL v2" is "GPL v2 only" See include/linux/module.h :: * "GPL" [GNU Public License v2 or later] * "GPL v2" [GNU Public License v2] Please make them match :-) [snip] > +MODULE_LICENSE("GPL v2"); > -- > 2.7.4 > Best regards Marcus Folkesson
Attachment:
signature.asc
Description: PGP signature
