On Fri, Aug 03, 2018 at 10:51:23PM +0100, Jonathan Cameron wrote:
> On Thu, 2 Aug 2018 20:18:57 -0400
> Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:
>
> > This patch adds device tree bindings to the tsl2772 driver for the
> > regulator framework.
> >
> > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
> I suspect Rob will tell you this should really have been in the same
> patch as the earlier bindings. There is no need for us to wait
> for the driver support as the binding describes what is there, not
> what we do with it.
Yep.
>
> Otherwise it's fine and if nothing else comes up I can merge them ;)
>
> Jonathan
>
> > ---
> > Documentation/devicetree/bindings/iio/light/tsl2772.txt | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > index 6f33169344f2..4e7d98627cbf 100644
> > --- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.txt
> > @@ -21,6 +21,8 @@ Optional properties:
> > are the only valid values.
> > - led-max-microamp - current for the proximity LED. Must be 100000, 50000,
> > 25000, or 13000.
> > + - vdd-supply: phandle to the regulator that provides power to the sensor.
> > + - vddio-supply: phandle to the regulator that provides power to the bus.
> > - interrupts: the sole interrupt generated by the device
> >
> > Refer to interrupt-controller/interrupts.txt for generic interrupt client
> > @@ -32,6 +34,8 @@ tsl2772@39 {
> > compatible = "amstaos,tsl2772";
> > reg = <0x39>;
> > interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
> > + vdd-supply = <&pm8941_l17>;
> > + vddio-supply = <&pm8941_lvs1>;
> > amstaos,proximity-diodes = <0>;
> > led-max-microamp = <100000>;
> > };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
