Re: [PATCH v3 4/4] iio: vcnl4000: add support for VCNL4200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 25 Jul 2018 17:18:21 +0200
Tomas Novotny <tomas.novotny@xxxxxxxxxxxxxxxxxx> wrote:

> From: Tomas Novotny <tomas@xxxxxxxxxx>
> 
> VCNL4200 is an integrated long distance (up to 1500mm) proximity and
> ambient light sensor.
> 
> The support is very basic. There is no configuration of proximity and
> ambient light sensing yet. Only the reading of both measured values is
> done.
> 
> The reading of ambient light and proximity values is blocking. If you
> request a new value too early, the driver waits for new value to be
> ready.
> 
> Signed-off-by: Tomas Novotny <tomas@xxxxxxxxxx>

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> No change v2..v3
> 
>  drivers/iio/light/Kconfig    |   5 +-
>  drivers/iio/light/vcnl4000.c | 114 ++++++++++++++++++++++++++++++++++++++++---
>  2 files changed, 109 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index 074e50657366..c0344a961f54 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -430,11 +430,12 @@ config US5182D
>  	 will be called us5182d.
>  
>  config VCNL4000
> -	tristate "VCNL4000/4010/4020 combined ALS and proximity sensor"
> +	tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
>  	depends on I2C
>  	help
>  	 Say Y here if you want to build a driver for the Vishay VCNL4000,
> -	 VCNL4010, VCNL4020 combined ambient light and proximity sensor.
> +	 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
> +	 sensor.
>  
>  	 To compile this driver as a module, choose M here: the
>  	 module will be called vcnl4000.
> diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> index a0cd1dcbf935..04fd0d4b6f19 100644
> --- a/drivers/iio/light/vcnl4000.c
> +++ b/drivers/iio/light/vcnl4000.c
> @@ -1,5 +1,5 @@
>  /*
> - * vcnl4000.c - Support for Vishay VCNL4000/4010/4020 combined ambient
> + * vcnl4000.c - Support for Vishay VCNL4000/4010/4020/4200 combined ambient
>   * light and proximity sensor
>   *
>   * Copyright 2012 Peter Meerwald <pmeerw@xxxxxxxxxx>
> @@ -8,13 +8,15 @@
>   * the GNU General Public License.  See the file COPYING in the main
>   * directory of this archive for more details.
>   *
> - * IIO driver for VCNL4000 (7-bit I2C slave address 0x13)
> + * IIO driver for:
> + *   VCNL4000/10/20 (7-bit I2C slave address 0x13)
> + *   VCNL4200 (7-bit I2C slave address 0x51)
>   *
>   * TODO:
>   *   allow to adjust IR current
>   *   proximity threshold and event handling
>   *   periodic ALS/proximity measurement (VCNL4010/20)
> - *   interrupts (VCNL4010/20)
> + *   interrupts (VCNL4010/20, VCNL4200)
>   */
>  
>  #include <linux/module.h>
> @@ -28,6 +30,7 @@
>  #define VCNL4000_DRV_NAME "vcnl4000"
>  #define VCNL4000_PROD_ID	0x01
>  #define VCNL4010_PROD_ID	0x02 /* for VCNL4020, VCNL4010 */
> +#define VCNL4200_PROD_ID	0x58
>  
>  #define VCNL4000_COMMAND	0x80 /* Command register */
>  #define VCNL4000_PROD_REV	0x81 /* Product ID and Revision ID */
> @@ -40,6 +43,12 @@
>  #define VCNL4000_PS_MEAS_FREQ	0x89 /* Proximity test signal frequency */
>  #define VCNL4000_PS_MOD_ADJ	0x8a /* Proximity modulator timing adjustment */
>  
> +#define VCNL4200_AL_CONF	0x00 /* Ambient light configuration */
> +#define VCNL4200_PS_CONF1	0x03 /* Proximity configuration */
> +#define VCNL4200_PS_DATA	0x08 /* Proximity data */
> +#define VCNL4200_AL_DATA	0x09 /* Ambient light data */
> +#define VCNL4200_DEV_ID		0x0e /* Device ID, slave address and version */
> +
>  /* Bit masks for COMMAND register */
>  #define VCNL4000_AL_RDY		BIT(6) /* ALS data ready? */
>  #define VCNL4000_PS_RDY		BIT(5) /* proximity data ready? */
> @@ -49,6 +58,14 @@
>  enum vcnl4000_device_ids {
>  	VCNL4000,
>  	VCNL4010,
> +	VCNL4200,
> +};
> +
> +struct vcnl4200_channel {
> +	u8 reg;
> +	ktime_t last_measurement;
> +	ktime_t sampling_rate;
> +	struct mutex lock;
>  };
>  
>  struct vcnl4000_data {
> @@ -57,7 +74,9 @@ struct vcnl4000_data {
>  	int rev;
>  	int al_scale;
>  	const struct vcnl4000_chip_spec *chip_spec;
> -	struct mutex lock;
> +	struct mutex vcnl4000_lock;
> +	struct vcnl4200_channel vcnl4200_al;
> +	struct vcnl4200_channel vcnl4200_ps;
>  };
>  
>  struct vcnl4000_chip_spec {
> @@ -71,6 +90,7 @@ static const struct i2c_device_id vcnl4000_id[] = {
>  	{ "vcnl4000", VCNL4000 },
>  	{ "vcnl4010", VCNL4010 },
>  	{ "vcnl4020", VCNL4010 },
> +	{ "vcnl4200", VCNL4200 },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, vcnl4000_id);
> @@ -101,6 +121,42 @@ static int vcnl4000_init(struct vcnl4000_data *data)
>  
>  	data->rev = ret & 0xf;
>  	data->al_scale = 250000;
> +	mutex_init(&data->vcnl4000_lock);
> +
> +	return 0;
> +};
> +
> +static int vcnl4200_init(struct vcnl4000_data *data)
> +{
> +	int ret;
> +
> +	ret = i2c_smbus_read_word_data(data->client, VCNL4200_DEV_ID);
> +	if (ret < 0)
> +		return ret;
> +
> +	if ((ret & 0xff) != VCNL4200_PROD_ID)
> +		return -ENODEV;
> +
> +	data->rev = (ret >> 8) & 0xf;
> +
> +	/* Set defaults and enable both channels */
> +	ret = i2c_smbus_write_byte_data(data->client, VCNL4200_AL_CONF, 0x00);
> +	if (ret < 0)
> +		return ret;
> +	ret = i2c_smbus_write_byte_data(data->client, VCNL4200_PS_CONF1, 0x00);
> +	if (ret < 0)
> +		return ret;
> +
> +	data->al_scale = 24000;
> +	data->vcnl4200_al.reg = VCNL4200_AL_DATA;
> +	data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
> +	/* Integration time is 50ms, but the experiments show 54ms in total. */
> +	data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000);
> +	data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000);
> +	data->vcnl4200_al.last_measurement = ktime_set(0, 0);
> +	data->vcnl4200_ps.last_measurement = ktime_set(0, 0);
> +	mutex_init(&data->vcnl4200_al.lock);
> +	mutex_init(&data->vcnl4200_ps.lock);
>  
>  	return 0;
>  };
> @@ -112,7 +168,7 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
>  	__be16 buf;
>  	int ret;
>  
> -	mutex_lock(&data->lock);
> +	mutex_lock(&data->vcnl4000_lock);
>  
>  	ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
>  					req_mask);
> @@ -141,16 +197,43 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
>  	if (ret < 0)
>  		goto fail;
>  
> -	mutex_unlock(&data->lock);
> +	mutex_unlock(&data->vcnl4000_lock);
>  	*val = be16_to_cpu(buf);
>  
>  	return 0;
>  
>  fail:
> -	mutex_unlock(&data->lock);
> +	mutex_unlock(&data->vcnl4000_lock);
>  	return ret;
>  }
>  
> +static int vcnl4200_measure(struct vcnl4000_data *data,
> +		struct vcnl4200_channel *chan, int *val)
> +{
> +	int ret;
> +	s64 delta;
> +	ktime_t next_measurement;
> +
> +	mutex_lock(&chan->lock);
> +
> +	next_measurement = ktime_add(chan->last_measurement,
> +			chan->sampling_rate);
> +	delta = ktime_us_delta(next_measurement, ktime_get());
> +	if (delta > 0)
> +		usleep_range(delta, delta + 500);
> +	chan->last_measurement = ktime_get();
> +
> +	mutex_unlock(&chan->lock);
> +
> +	ret = i2c_smbus_read_word_data(data->client, chan->reg);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = ret;
> +
> +	return 0;
> +}
> +
>  static int vcnl4000_measure_light(struct vcnl4000_data *data, int *val)
>  {
>  	return vcnl4000_measure(data,
> @@ -158,6 +241,11 @@ static int vcnl4000_measure_light(struct vcnl4000_data *data, int *val)
>  			VCNL4000_AL_RESULT_HI, val);
>  }
>  
> +static int vcnl4200_measure_light(struct vcnl4000_data *data, int *val)
> +{
> +	return vcnl4200_measure(data, &data->vcnl4200_al, val);
> +}
> +
>  static int vcnl4000_measure_proximity(struct vcnl4000_data *data, int *val)
>  {
>  	return vcnl4000_measure(data,
> @@ -165,6 +253,11 @@ static int vcnl4000_measure_proximity(struct vcnl4000_data *data, int *val)
>  			VCNL4000_PS_RESULT_HI, val);
>  }
>  
> +static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
> +{
> +	return vcnl4200_measure(data, &data->vcnl4200_ps, val);
> +}
> +
>  static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
>  	[VCNL4000] = {
>  		.prod = "VCNL4000",
> @@ -178,6 +271,12 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
>  		.measure_light = vcnl4000_measure_light,
>  		.measure_proximity = vcnl4000_measure_proximity,
>  	},
> +	[VCNL4200] = {
> +		.prod = "VCNL4200",
> +		.init = vcnl4200_init,
> +		.measure_light = vcnl4200_measure_light,
> +		.measure_proximity = vcnl4200_measure_proximity,
> +	},
>  };
>  
>  static const struct iio_chan_spec vcnl4000_channels[] = {
> @@ -246,7 +345,6 @@ static int vcnl4000_probe(struct i2c_client *client,
>  	data->client = client;
>  	data->id = id->driver_data;
>  	data->chip_spec = &vcnl4000_chip_spec_cfg[data->id];
> -	mutex_init(&data->lock);
>  
>  	ret = data->chip_spec->init(data);
>  	if (ret < 0)

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux