From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
The AD9523 supports external signals for power-down mode, resetting the
device and sync timing.
This change add support for specifying values for these signals via the
gpios and initializing them default values.
For the reset signal, the GPIO is toggled during probing to re-initialize
the device to a known state.
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
drivers/iio/frequency/ad9523.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
index 37504739c277..38a8f73bd8d9 100644
--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -12,6 +12,7 @@
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/delay.h>
@@ -268,6 +269,9 @@ struct ad9523_state {
struct regulator *reg;
struct ad9523_platform_data *pdata;
struct iio_chan_spec ad9523_channels[AD9523_NUM_CHAN];
+ struct gpio_desc *pwrdown_gpio;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *sync_gpio;
unsigned long vcxo_freq;
unsigned long vco_freq;
@@ -988,6 +992,32 @@ static int ad9523_probe(struct spi_device *spi)
return ret;
}
+ st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(st->pwrdown_gpio)) {
+ ret = PTR_ERR(st->pwrdown_gpio);
+ goto error_disable_reg;
+ }
+
+ st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->reset_gpio)) {
+ ret = PTR_ERR(st->reset_gpio);
+ goto error_disable_reg;
+ }
+
+ if (st->reset_gpio) {
+ udelay(1);
+ gpiod_direction_output(st->reset_gpio, 1);
+ }
+
+ st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(st->sync_gpio)) {
+ ret = PTR_ERR(st->sync_gpio);
+ goto error_disable_reg;
+ }
+
spi_set_drvdata(spi, indio_dev);
st->spi = spi;
st->pdata = pdata;
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
