On Mon, 2018-07-23 at 11:18 +0200, Nicholas Mc Guire wrote:
> wait_for_completion_timeout returns unsigned long not int so an
> appropriate
> variable is declared and the assignment and check fixed up.
>
Patch looks good.
Thanks for this
Alex
> Signed-off-by: Nicholas Mc Guire <hofrat@xxxxxxxxx>
> ---
>
> found by experimental coccinelle script
>
> As the timeout returned is always << INT_MAX there is no side-effect with
> the
> type conversion here, never the less proper types should be used.
>
> Patch was compile tested with: x86_64_defconfig + CONFIG_SPI=y,
> CONFIG_IIO=y,
> CONFIG_AD7793=y (implies CONFIG_AD_SIGMA_DELTA=y)
>
> Patch is against 4.18-rc5 (localversion-next is next-20180720)
>
> drivers/iio/adc/ad_sigma_delta.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/ad_sigma_delta.c
> b/drivers/iio/adc/ad_sigma_delta.c
> index cf1b048..fc95107 100644
> --- a/drivers/iio/adc/ad_sigma_delta.c
> +++ b/drivers/iio/adc/ad_sigma_delta.c
> @@ -209,6 +209,7 @@ static int ad_sd_calibrate(struct ad_sigma_delta
> *sigma_delta,
> unsigned int mode, unsigned int channel)
> {
> int ret;
> + unsigned long timeout;
>
> ret = ad_sigma_delta_set_channel(sigma_delta, channel);
> if (ret)
> @@ -224,8 +225,8 @@ static int ad_sd_calibrate(struct ad_sigma_delta
> *sigma_delta,
>
> sigma_delta->irq_dis = false;
> enable_irq(sigma_delta->spi->irq);
> - ret = wait_for_completion_timeout(&sigma_delta->completion,
> 2*HZ);
> - if (ret == 0) {
> + timeout = wait_for_completion_timeout(&sigma_delta->completion,
> 2 * HZ);
> + if (timeout == 0) {
> sigma_delta->irq_dis = true;
> disable_irq_nosync(sigma_delta->spi->irq);
> ret = -EIO;��.n��������+%������w��{.n�����{��(��)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
