Hi Jonathan, Thanks for your comments. > -----Original Message----- > From: Jonathan Cameron [mailto:jic23@xxxxxxxxxx] > Sent: Saturday, July 21, 2018 9:54 PM > To: Lars-Peter Clausen <lars@xxxxxxxxxx> > Cc: Manish Narani <MNARANI@xxxxxxxxxx>; knaack.h@xxxxxx; > pmeerw@xxxxxxxxxx; Michal Simek <michals@xxxxxxxxxx>; linux- > iio@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; Anirudha Sarangi <anirudh@xxxxxxxxxx>; Srinivas > Goud <sgoud@xxxxxxxxxx> > Subject: Re: [PATCH 3/4] iio: adc: xilinx: Check for return values in clk related > functions > > On Thu, 19 Jul 2018 18:40:26 +0200 > Lars-Peter Clausen <lars@xxxxxxxxxx> wrote: > > > On 07/18/2018 01:12 PM, Manish Narani wrote: > > > This patch adds check for return values from clock related functions. > > > This was reported by static code analysis tool. > > > > This patch seems to do something else. > Indeed, definitely doing two things only one of which is mentioned. > Please break it up and resend. I will break it up and resend. > > Jonathan > > > > > > > > > Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx> > > > --- > > > drivers/iio/adc/xilinx-xadc-core.c | 24 ++++++++++++++++++++++-- > > > 1 file changed, 22 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/iio/adc/xilinx-xadc-core.c > > > b/drivers/iio/adc/xilinx-xadc-core.c > > > index 248cffa..47eb364 100644 > > > --- a/drivers/iio/adc/xilinx-xadc-core.c > > > +++ b/drivers/iio/adc/xilinx-xadc-core.c > > > @@ -322,6 +322,7 @@ static irqreturn_t > > > xadc_zynq_interrupt_handler(int irq, void *devid) > > > > > > #define XADC_ZYNQ_TCK_RATE_MAX 50000000 #define > > > XADC_ZYNQ_IGAP_DEFAULT 20 > > > +#define XADC_ZYNQ_PCAP_RATE_MAX 200000000 > > > > > > static int xadc_zynq_setup(struct platform_device *pdev, > > > struct iio_dev *indio_dev, int irq) @@ -332,6 +333,7 @@ static int > > > xadc_zynq_setup(struct platform_device *pdev, > > > unsigned int div; > > > unsigned int igap; > > > unsigned int tck_rate; > > > + int ret; > > > > > > /* TODO: Figure out how to make igap and tck_rate configurable */ > > > igap = XADC_ZYNQ_IGAP_DEFAULT; > > > @@ -341,6 +343,13 @@ static int xadc_zynq_setup(struct > > > platform_device *pdev, > > > > > > pcap_rate = clk_get_rate(xadc->clk); > > > > > > + if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) { > > > + ret = clk_set_rate(xadc->clk, > > > + (unsigned > long)XADC_ZYNQ_PCAP_RATE_MAX); > > > + if (ret) > > > + return ret; > > > + } > > > + > > > if (tck_rate > pcap_rate / 2) { > > > div = 2; > > > } else { > > > @@ -366,6 +375,12 @@ static int xadc_zynq_setup(struct platform_device > *pdev, > > > XADC_ZYNQ_CFG_REDGE | XADC_ZYNQ_CFG_WEDGE > | > > > tck_div | XADC_ZYNQ_CFG_IGAP(igap)); > > > > > > + if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) { > > > + ret = clk_set_rate(xadc->clk, pcap_rate); > > > + if (ret) > > > + return ret; > > > + } > > > + > > > return 0; > > > } > > > > > > @@ -887,6 +902,9 @@ static int xadc_write_raw(struct iio_dev *indio_dev, > > > unsigned long clk_rate = xadc_get_dclk_rate(xadc); > > > unsigned int div; > > > > > > + if (!clk_rate) > > > + return -EINVAL; > > > + > > > if (info != IIO_CHAN_INFO_SAMP_FREQ) > > > return -EINVAL; > > > > > > @@ -1239,8 +1257,10 @@ static int xadc_probe(struct platform_device > *pdev) > > > goto err_free_irq; > > > > > > /* Disable all alarms */ > > > - xadc_update_adc_reg(xadc, XADC_REG_CONF1, > XADC_CONF1_ALARM_MASK, > > > - XADC_CONF1_ALARM_MASK); > > > + ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, > XADC_CONF1_ALARM_MASK, > > > + XADC_CONF1_ALARM_MASK); > > > + if (ret) > > > + goto err_free_irq; > > > > > > /* Set thresholds to min/max */ > > > for (i = 0; i < 16; i++) { > > > > > Thanks, Manish Narani -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
