Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/12/2017 02:39 PM, Krzysztof Kozlowski wrote:
On Thu, Oct 12, 2017 at 2:36 PM, Maciej Purski <m.purski@xxxxxxxxxxx> wrote:
Add optional max expected current property which allows calibrating
the ina sensor in order to achieve requested measure scale. Document
the changes in Documentation/hwmon/ina2xx.

Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
---
  Documentation/devicetree/bindings/hwmon/ina2xx.txt | 4 +++-
  Documentation/hwmon/ina2xx                         | 3 +++
  2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
index 02af0d9..49ef0be 100644
--- a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
+++ b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
@@ -14,11 +14,13 @@ Optional properties:

  - shunt-resistor
         Shunt resistor value in micro-Ohm
-
+- ti-max-expected-current-microamp
+       Max expected current value in mA
  Example:

  ina220@44 {
         compatible = "ti,ina220";
         reg = <0x44>;
         shunt-resistor = <1000>;
+       ti-max-expected-current-microamp = <3000>;
  };
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index cfd31d9..30620e8 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -55,6 +55,9 @@ The shunt value in micro-ohms can be set via platform data or device tree at
  compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
  refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
  if the device tree is used.
+The max expected current value in miliamp can be set via platform data

mili or micro?

BR,
Krzysztof

Sorry, these should be mili everywhere. I'll fix this.


+or device tree at compile-time or via currX_max attribute in sysfs
+at run-time.

  Additionally ina226 supports update_interval attribute as described in
  Documentation/hwmon/sysfs-interface. Internally the interval is the sum of
--
2.7.4




--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux