This fix allows platforms to probe correctly even if the trigger edge property is missing. The hardware trigger will no longer be registered in the sybsystem Preserves backwards compatibility with the support that was in the driver before the hardware trigger. Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> --- Hello Jonathan, The trigger feature is new and it prevents current platforms from probing correctly. Here is a link with the failure from kernelci.org https://storage.kernelci.org/mainline/master/v4.14-rc2-255-g74d83ec2b734/arm/sama5_defconfig/lab-free-electrons/boot-at91-sama5d2_xplained.txt This would need to go to 4.14-final, if it's not too late. drivers/iio/adc/at91-sama5d2_adc.c | 45 ++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index 318601b..755a493 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -225,6 +225,7 @@ struct at91_adc_trigger { char *name; unsigned int trgmod_value; unsigned int edge_type; + bool hw_trig; }; struct at91_adc_state { @@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = { .name = "external_rising", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE, .edge_type = IRQ_TYPE_EDGE_RISING, + .hw_trig = true, }, { .name = "external_falling", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL, .edge_type = IRQ_TYPE_EDGE_FALLING, + .hw_trig = true, }, { .name = "external_any", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY, .edge_type = IRQ_TYPE_EDGE_BOTH, + .hw_trig = true, + }, + { + .name = "software", + .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER, + .edge_type = IRQ_TYPE_NONE, + .hw_trig = false, }, }; @@ -595,7 +605,7 @@ static int at91_adc_probe(struct platform_device *pdev) struct at91_adc_state *st; struct resource *res; int ret, i; - u32 edge_type; + u32 edge_type = IRQ_TYPE_NONE; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); if (!indio_dev) @@ -639,14 +649,14 @@ static int at91_adc_probe(struct platform_device *pdev) ret = of_property_read_u32(pdev->dev.of_node, "atmel,trigger-edge-type", &edge_type); if (ret) { - dev_err(&pdev->dev, - "invalid or missing value for atmel,trigger-edge-type\n"); - return ret; + dev_dbg(&pdev->dev, + "atmel,trigger-edge-type not specified, only software trigger available\n"); } st->selected_trig = NULL; - for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++) + /* find the right trigger, or no trigger at all */ + for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++) if (at91_adc_trigger_list[i].edge_type == edge_type) { st->selected_trig = &at91_adc_trigger_list[i]; break; @@ -715,24 +725,27 @@ static int at91_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, indio_dev); - ret = at91_adc_buffer_init(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); - goto per_clk_disable_unprepare; - } + if (st->selected_trig->hw_trig) { + ret = at91_adc_buffer_init(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); + goto per_clk_disable_unprepare; + } - ret = at91_adc_trigger_init(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "couldn't setup the triggers.\n"); - goto per_clk_disable_unprepare; + ret = at91_adc_trigger_init(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "couldn't setup the triggers.\n"); + goto per_clk_disable_unprepare; + } } ret = iio_device_register(indio_dev); if (ret < 0) goto per_clk_disable_unprepare; - dev_info(&pdev->dev, "setting up trigger as %s\n", - st->selected_trig->name); + if (st->selected_trig->hw_trig) + dev_info(&pdev->dev, "setting up trigger as %s\n", + st->selected_trig->name); dev_info(&pdev->dev, "version: %x\n", readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
