The contents of the header file are used only by this single source file. Move content into .c file and remove header. Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx> --- drivers/staging/iio/accel/adis16240.h | 179 ----------------------------- drivers/staging/iio/accel/adis16240_core.c | 175 +++++++++++++++++++++++++++- 2 files changed, 174 insertions(+), 180 deletions(-) delete mode 100644 drivers/staging/iio/accel/adis16240.h diff --git a/drivers/staging/iio/accel/adis16240.h b/drivers/staging/iio/accel/adis16240.h deleted file mode 100644 index b2cb37b..0000000 --- a/drivers/staging/iio/accel/adis16240.h +++ /dev/null @@ -1,179 +0,0 @@ -#ifndef SPI_ADIS16240_H_ -#define SPI_ADIS16240_H_ - -#define ADIS16240_STARTUP_DELAY 220 /* ms */ - -/* Flash memory write count */ -#define ADIS16240_FLASH_CNT 0x00 - -/* Output, power supply */ -#define ADIS16240_SUPPLY_OUT 0x02 - -/* Output, x-axis accelerometer */ -#define ADIS16240_XACCL_OUT 0x04 - -/* Output, y-axis accelerometer */ -#define ADIS16240_YACCL_OUT 0x06 - -/* Output, z-axis accelerometer */ -#define ADIS16240_ZACCL_OUT 0x08 - -/* Output, auxiliary ADC input */ -#define ADIS16240_AUX_ADC 0x0A - -/* Output, temperature */ -#define ADIS16240_TEMP_OUT 0x0C - -/* Output, x-axis acceleration peak */ -#define ADIS16240_XPEAK_OUT 0x0E - -/* Output, y-axis acceleration peak */ -#define ADIS16240_YPEAK_OUT 0x10 - -/* Output, z-axis acceleration peak */ -#define ADIS16240_ZPEAK_OUT 0x12 - -/* Output, sum-of-squares acceleration peak */ -#define ADIS16240_XYZPEAK_OUT 0x14 - -/* Output, Capture Buffer 1, X and Y acceleration */ -#define ADIS16240_CAPT_BUF1 0x16 - -/* Output, Capture Buffer 2, Z acceleration */ -#define ADIS16240_CAPT_BUF2 0x18 - -/* Diagnostic, error flags */ -#define ADIS16240_DIAG_STAT 0x1A - -/* Diagnostic, event counter */ -#define ADIS16240_EVNT_CNTR 0x1C - -/* Diagnostic, check sum value from firmware test */ -#define ADIS16240_CHK_SUM 0x1E - -/* Calibration, x-axis acceleration offset adjustment */ -#define ADIS16240_XACCL_OFF 0x20 - -/* Calibration, y-axis acceleration offset adjustment */ -#define ADIS16240_YACCL_OFF 0x22 - -/* Calibration, z-axis acceleration offset adjustment */ -#define ADIS16240_ZACCL_OFF 0x24 - -/* Clock, hour and minute */ -#define ADIS16240_CLK_TIME 0x2E - -/* Clock, month and day */ -#define ADIS16240_CLK_DATE 0x30 - -/* Clock, year */ -#define ADIS16240_CLK_YEAR 0x32 - -/* Wake-up setting, hour and minute */ -#define ADIS16240_WAKE_TIME 0x34 - -/* Wake-up setting, month and day */ -#define ADIS16240_WAKE_DATE 0x36 - -/* Alarm 1 amplitude threshold */ -#define ADIS16240_ALM_MAG1 0x38 - -/* Alarm 2 amplitude threshold */ -#define ADIS16240_ALM_MAG2 0x3A - -/* Alarm control */ -#define ADIS16240_ALM_CTRL 0x3C - -/* Capture, external trigger control */ -#define ADIS16240_XTRIG_CTRL 0x3E - -/* Capture, address pointer */ -#define ADIS16240_CAPT_PNTR 0x40 - -/* Capture, configuration and control */ -#define ADIS16240_CAPT_CTRL 0x42 - -/* General-purpose digital input/output control */ -#define ADIS16240_GPIO_CTRL 0x44 - -/* Miscellaneous control */ -#define ADIS16240_MSC_CTRL 0x46 - -/* Internal sample period (rate) control */ -#define ADIS16240_SMPL_PRD 0x48 - -/* System command */ -#define ADIS16240_GLOB_CMD 0x4A - -/* MSC_CTRL */ - -/* Enables sum-of-squares output (XYZPEAK_OUT) */ -#define ADIS16240_MSC_CTRL_XYZPEAK_OUT_EN BIT(15) - -/* Enables peak tracking output (XPEAK_OUT, YPEAK_OUT, and ZPEAK_OUT) */ -#define ADIS16240_MSC_CTRL_X_Y_ZPEAK_OUT_EN BIT(14) - -/* Self-test enable: 1 = apply electrostatic force, 0 = disabled */ -#define ADIS16240_MSC_CTRL_SELF_TEST_EN BIT(8) - -/* Data-ready enable: 1 = enabled, 0 = disabled */ -#define ADIS16240_MSC_CTRL_DATA_RDY_EN BIT(2) - -/* Data-ready polarity: 1 = active high, 0 = active low */ -#define ADIS16240_MSC_CTRL_ACTIVE_HIGH BIT(1) - -/* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ -#define ADIS16240_MSC_CTRL_DATA_RDY_DIO2 BIT(0) - -/* DIAG_STAT */ - -/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16240_DIAG_STAT_ALARM2 BIT(9) - -/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ -#define ADIS16240_DIAG_STAT_ALARM1 BIT(8) - -/* Capture buffer full: 1 = capture buffer is full */ -#define ADIS16240_DIAG_STAT_CPT_BUF_FUL BIT(7) - -/* Flash test, checksum flag: 1 = mismatch, 0 = match */ -#define ADIS16240_DIAG_STAT_CHKSUM BIT(6) - -/* Power-on, self-test flag: 1 = failure, 0 = pass */ -#define ADIS16240_DIAG_STAT_PWRON_FAIL_BIT 5 - -/* Power-on self-test: 1 = in-progress, 0 = complete */ -#define ADIS16240_DIAG_STAT_PWRON_BUSY BIT(4) - -/* SPI communications failure */ -#define ADIS16240_DIAG_STAT_SPI_FAIL_BIT 3 - -/* Flash update failure */ -#define ADIS16240_DIAG_STAT_FLASH_UPT_BIT 2 - -/* Power supply above 3.625 V */ -#define ADIS16240_DIAG_STAT_POWER_HIGH_BIT 1 - - /* Power supply below 3.15 V */ -#define ADIS16240_DIAG_STAT_POWER_LOW_BIT 0 - -/* GLOB_CMD */ - -#define ADIS16240_GLOB_CMD_RESUME BIT(8) -#define ADIS16240_GLOB_CMD_SW_RESET BIT(7) -#define ADIS16240_GLOB_CMD_STANDBY BIT(2) - -#define ADIS16240_ERROR_ACTIVE BIT(14) - -/* At the moment triggers are only used for ring buffer - * filling. This may change! - */ - -#define ADIS16240_SCAN_ACC_X 0 -#define ADIS16240_SCAN_ACC_Y 1 -#define ADIS16240_SCAN_ACC_Z 2 -#define ADIS16240_SCAN_SUPPLY 3 -#define ADIS16240_SCAN_AUX_ADC 4 -#define ADIS16240_SCAN_TEMP 5 - -#endif /* SPI_ADIS16240_H_ */ diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c index d5b99e6..9690e46 100644 --- a/drivers/staging/iio/accel/adis16240_core.c +++ b/drivers/staging/iio/accel/adis16240_core.c @@ -24,7 +24,180 @@ #include <linux/iio/buffer.h> #include <linux/iio/imu/adis.h> -#include "adis16240.h" +#define ADIS16240_STARTUP_DELAY 220 /* ms */ + +/* Flash memory write count */ +#define ADIS16240_FLASH_CNT 0x00 + +/* Output, power supply */ +#define ADIS16240_SUPPLY_OUT 0x02 + +/* Output, x-axis accelerometer */ +#define ADIS16240_XACCL_OUT 0x04 + +/* Output, y-axis accelerometer */ +#define ADIS16240_YACCL_OUT 0x06 + +/* Output, z-axis accelerometer */ +#define ADIS16240_ZACCL_OUT 0x08 + +/* Output, auxiliary ADC input */ +#define ADIS16240_AUX_ADC 0x0A + +/* Output, temperature */ +#define ADIS16240_TEMP_OUT 0x0C + +/* Output, x-axis acceleration peak */ +#define ADIS16240_XPEAK_OUT 0x0E + +/* Output, y-axis acceleration peak */ +#define ADIS16240_YPEAK_OUT 0x10 + +/* Output, z-axis acceleration peak */ +#define ADIS16240_ZPEAK_OUT 0x12 + +/* Output, sum-of-squares acceleration peak */ +#define ADIS16240_XYZPEAK_OUT 0x14 + +/* Output, Capture Buffer 1, X and Y acceleration */ +#define ADIS16240_CAPT_BUF1 0x16 + +/* Output, Capture Buffer 2, Z acceleration */ +#define ADIS16240_CAPT_BUF2 0x18 + +/* Diagnostic, error flags */ +#define ADIS16240_DIAG_STAT 0x1A + +/* Diagnostic, event counter */ +#define ADIS16240_EVNT_CNTR 0x1C + +/* Diagnostic, check sum value from firmware test */ +#define ADIS16240_CHK_SUM 0x1E + +/* Calibration, x-axis acceleration offset adjustment */ +#define ADIS16240_XACCL_OFF 0x20 + +/* Calibration, y-axis acceleration offset adjustment */ +#define ADIS16240_YACCL_OFF 0x22 + +/* Calibration, z-axis acceleration offset adjustment */ +#define ADIS16240_ZACCL_OFF 0x24 + +/* Clock, hour and minute */ +#define ADIS16240_CLK_TIME 0x2E + +/* Clock, month and day */ +#define ADIS16240_CLK_DATE 0x30 + +/* Clock, year */ +#define ADIS16240_CLK_YEAR 0x32 + +/* Wake-up setting, hour and minute */ +#define ADIS16240_WAKE_TIME 0x34 + +/* Wake-up setting, month and day */ +#define ADIS16240_WAKE_DATE 0x36 + +/* Alarm 1 amplitude threshold */ +#define ADIS16240_ALM_MAG1 0x38 + +/* Alarm 2 amplitude threshold */ +#define ADIS16240_ALM_MAG2 0x3A + +/* Alarm control */ +#define ADIS16240_ALM_CTRL 0x3C + +/* Capture, external trigger control */ +#define ADIS16240_XTRIG_CTRL 0x3E + +/* Capture, address pointer */ +#define ADIS16240_CAPT_PNTR 0x40 + +/* Capture, configuration and control */ +#define ADIS16240_CAPT_CTRL 0x42 + +/* General-purpose digital input/output control */ +#define ADIS16240_GPIO_CTRL 0x44 + +/* Miscellaneous control */ +#define ADIS16240_MSC_CTRL 0x46 + +/* Internal sample period (rate) control */ +#define ADIS16240_SMPL_PRD 0x48 + +/* System command */ +#define ADIS16240_GLOB_CMD 0x4A + +/* MSC_CTRL */ + +/* Enables sum-of-squares output (XYZPEAK_OUT) */ +#define ADIS16240_MSC_CTRL_XYZPEAK_OUT_EN BIT(15) + +/* Enables peak tracking output (XPEAK_OUT, YPEAK_OUT, and ZPEAK_OUT) */ +#define ADIS16240_MSC_CTRL_X_Y_ZPEAK_OUT_EN BIT(14) + +/* Self-test enable: 1 = apply electrostatic force, 0 = disabled */ +#define ADIS16240_MSC_CTRL_SELF_TEST_EN BIT(8) + +/* Data-ready enable: 1 = enabled, 0 = disabled */ +#define ADIS16240_MSC_CTRL_DATA_RDY_EN BIT(2) + +/* Data-ready polarity: 1 = active high, 0 = active low */ +#define ADIS16240_MSC_CTRL_ACTIVE_HIGH BIT(1) + +/* Data-ready line selection: 1 = DIO2, 0 = DIO1 */ +#define ADIS16240_MSC_CTRL_DATA_RDY_DIO2 BIT(0) + +/* DIAG_STAT */ + +/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16240_DIAG_STAT_ALARM2 BIT(9) + +/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */ +#define ADIS16240_DIAG_STAT_ALARM1 BIT(8) + +/* Capture buffer full: 1 = capture buffer is full */ +#define ADIS16240_DIAG_STAT_CPT_BUF_FUL BIT(7) + +/* Flash test, checksum flag: 1 = mismatch, 0 = match */ +#define ADIS16240_DIAG_STAT_CHKSUM BIT(6) + +/* Power-on, self-test flag: 1 = failure, 0 = pass */ +#define ADIS16240_DIAG_STAT_PWRON_FAIL_BIT 5 + +/* Power-on self-test: 1 = in-progress, 0 = complete */ +#define ADIS16240_DIAG_STAT_PWRON_BUSY BIT(4) + +/* SPI communications failure */ +#define ADIS16240_DIAG_STAT_SPI_FAIL_BIT 3 + +/* Flash update failure */ +#define ADIS16240_DIAG_STAT_FLASH_UPT_BIT 2 + +/* Power supply above 3.625 V */ +#define ADIS16240_DIAG_STAT_POWER_HIGH_BIT 1 + + /* Power supply below 3.15 V */ +#define ADIS16240_DIAG_STAT_POWER_LOW_BIT 0 + +/* GLOB_CMD */ + +#define ADIS16240_GLOB_CMD_RESUME BIT(8) +#define ADIS16240_GLOB_CMD_SW_RESET BIT(7) +#define ADIS16240_GLOB_CMD_STANDBY BIT(2) + +#define ADIS16240_ERROR_ACTIVE BIT(14) + +/* At the moment triggers are only used for ring buffer + * filling. This may change! + */ + +#define ADIS16240_SCAN_ACC_X 0 +#define ADIS16240_SCAN_ACC_Y 1 +#define ADIS16240_SCAN_ACC_Z 2 +#define ADIS16240_SCAN_SUPPLY 3 +#define ADIS16240_SCAN_AUX_ADC 4 +#define ADIS16240_SCAN_TEMP 5 static ssize_t adis16240_spi_read_signed(struct device *dev, struct device_attribute *attr, -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
