Signed-off-by: Maxime Roussin-Belanger <maxime.roussinbelanger@xxxxxxxxx>
---
.../devicetree/bindings/iio/dac/ltc2632.txt | 23 ++
drivers/iio/dac/Kconfig | 7 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ltc2632.c | 325 +++++++++++++++++++++
4 files changed, 356 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
create mode 100644 drivers/iio/dac/ltc2632.c
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
new file mode 100644
index 0000000..fd9aa0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
@@ -0,0 +1,23 @@
+Linear Technology LTC2632 DAC device driver
+
+Required properties:
+ - compatible: Has to contain one of the following
+ lltc,ltc2632-l12
+ lltc,ltc2632-l10
+ lltc,ltc2632-l8
+ lltc,ltc2632-h12
+ lltc,ltc2632-h10
+ lltc,ltc2632-h8
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+Example:
+
+ spi_master {
+ dac: ltc2632@0 {
+ compatible = "lltc,ltc2632";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ };
+ };
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index d3084028..f32ca8a 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -118,6 +118,13 @@ config AD5624R_SPI
Say yes here to build support for Analog Devices AD5624R, AD5644R and
AD5664R converters (DAC). This driver uses the common SPI interface.
+config LTC2632
+ tristate "Linear Technology LTC2632-12/10/8 DAC spi driver"
+ depends on SPI
+ help
+ Say yes here to build support for Linear Technology LTC2632-12/10/8 converters (DAC).
+ This driver uses the common SPI interface.
+
config AD5686
tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver"
depends on SPI
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index f01bf4a..6e4d995 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_AD8801) += ad8801.o
obj-$(CONFIG_CIO_DAC) += cio-dac.o
obj-$(CONFIG_DPOT_DAC) += dpot-dac.o
obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o
+obj-$(CONFIG_LTC2632) += ltc2632.o
obj-$(CONFIG_M62332) += m62332.o
obj-$(CONFIG_MAX517) += max517.o
obj-$(CONFIG_MAX5821) += max5821.o
diff --git a/drivers/iio/dac/ltc2632.c b/drivers/iio/dac/ltc2632.c
new file mode 100644
index 0000000..d6160fb
--- /dev/null
+++ b/drivers/iio/dac/ltc2632.c
@@ -0,0 +1,325 @@
+/*
+ * LTC2632 Digital to analog convertors spi driver
+ */
+
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+#define LTC2632_DAC_CHANNELS 2
+
+#define LTC2632_ADDR_DAC0 0x0
+#define LTC2632_ADDR_DAC1 0x1
+
+#define LTC2632_CMD_WRITE_INPUT_N 0x0
+#define LTC2632_CMD_UPDATE_DAC_N 0x1
+#define LTC2632_CMD_WRITE_INPUT_N_UPDATE_ALL 0x2
+#define LTC2632_CMD_WRITE_INPUT_N_UPDATE_N 0x3
+#define LTC2632_CMD_POWERDOWN_DAC_N 0x4
+#define LTC2632_CMD_POWERDOWN_CHIP 0x5
+#define LTC2632_CMD_INTERNAL_REFER 0x6
+#define LTC2632_CMD_EXTERNAL_REFER 0x7
+
+
+static ssize_t ltc2632_read_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ char *buf);
+
+static ssize_t ltc2632_write_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ const char *buf,
+ size_t len);
+
+/**
+ * struct ltc2632_chip_info - chip specific information
+ * @channels: channel spec for the DAC
+ */
+struct ltc2632_chip_info {
+ const struct iio_chan_spec *channels;
+ const int vref_mv;
+};
+
+/**
+ * struct ltc2632_state - driver instance specific data
+ * @spi_dev: spi_device
+ * @pwr_down_cached power down mask
+ */
+struct ltc2632_state {
+ struct spi_device *spi_dev;
+ unsigned int pwr_down_cached;
+};
+
+/**
+ * ltc2632_supported_device_ids
+ */
+enum ltc2632_supported_device_ids {
+ ID_LTC2632L12,
+ ID_LTC2632L10,
+ ID_LTC2632L8,
+ ID_LTC2632H12,
+ ID_LTC2632H10,
+ ID_LTC2632H8,
+};
+
+static const struct iio_chan_spec_ext_info ltc2632_ext_info[] = {
+ {
+ .name = "powerdown",
+ .read = ltc2632_read_dac_powerdown,
+ .write = ltc2632_write_dac_powerdown,
+ .shared = IIO_SEPARATE,
+ },
+ { },
+};
+
+#define LTC2632_CHANNEL(_chan, _bits) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .output = 1, \
+ .channel = (_chan), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .address = (_chan), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_bits), \
+ .storagebits = 16, \
+ .shift = 16 - (_bits), \
+ }, \
+ .ext_info = ltc2632_ext_info, \
+}
+
+#define DECLARE_LTC2632_CHANNELS(_name, _bits) \
+ const struct iio_chan_spec _name ## _channels[] = { \
+ LTC2632_CHANNEL(0, _bits), \
+ LTC2632_CHANNEL(1, _bits), \
+ }
+
+static DECLARE_LTC2632_CHANNELS(ltc2632l12, 12);
+static DECLARE_LTC2632_CHANNELS(ltc2632l10, 10);
+static DECLARE_LTC2632_CHANNELS(ltc2632l8, 8);
+
+static DECLARE_LTC2632_CHANNELS(ltc2632h12, 12);
+static DECLARE_LTC2632_CHANNELS(ltc2632h10, 10);
+static DECLARE_LTC2632_CHANNELS(ltc2632h8, 8);
+
+static const struct ltc2632_chip_info ltc2632_chip_info_tbl[] = {
+ [ID_LTC2632L12] = {
+ .channels = ltc2632l12_channels,
+ .vref_mv = 2500,
+ },
+ [ID_LTC2632L10] = {
+ .channels = ltc2632l10_channels,
+ .vref_mv = 2500,
+ },
+ [ID_LTC2632L8] = {
+ .channels = ltc2632l8_channels,
+ .vref_mv = 2500,
+ },
+ [ID_LTC2632H12] = {
+ .channels = ltc2632h12_channels,
+ .vref_mv = 4096,
+ },
+ [ID_LTC2632H10] = {
+ .channels = ltc2632h10_channels,
+ .vref_mv = 4096,
+ },
+ [ID_LTC2632H8] = {
+ .channels = ltc2632h8_channels,
+ .vref_mv = 4096,
+ },
+};
+
+static int ltc2632_spi_write(struct spi_device *spi,
+ u8 cmd, u8 addr, u16 val, u8 shift)
+{
+ u32 data;
+ u8 msg[3];
+
+ /*
+ * The input shift register is 24 bits wide.
+ * The next four are the command bits, C3 to C0,
+ * followed by the 4-bit DAC address, A3 to A0, and then the
+ * 12-, 10-, 8-bit data-word. The data-word comprises the 12-,
+ * 10-, 8-bit input code followed by 4, 6, or 8 don't care bits.
+ */
+ data = (cmd << 20) | (addr << 16) | (val << shift);
+ msg[0] = data >> 16;
+ msg[1] = data >> 8;
+ msg[2] = data;
+
+ return spi_write(spi, msg, 3);
+}
+
+static int ltc2632_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ struct ltc2632_chip_info *chip_info;
+
+ const struct ltc2632_state *st = iio_priv(indio_dev);
+ const struct spi_device_id* spi_dev_id = spi_get_device_id(st->spi_dev);
+
+ chip_info = (struct ltc2632_chip_info*) spi_dev_id->driver_data;
+
+ switch (m) {
+ case IIO_CHAN_INFO_SCALE:
+ *val = chip_info->vref_mv;
+ *val2 = chan->scan_type.realbits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ }
+ return -EINVAL;
+}
+
+static int ltc2632_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct ltc2632_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (val >= (1 << chan->scan_type.realbits) || val < 0)
+ return -EINVAL;
+
+ return ltc2632_spi_write(st->spi_dev,
+ LTC2632_CMD_WRITE_INPUT_N_UPDATE_N,
+ chan->address, val,
+ chan->scan_type.shift);
+ default:
+ return -EINVAL;
+ }
+
+}
+
+static ssize_t ltc2632_read_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ char *buf)
+{
+ struct ltc2632_state *st = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n",
+ !!(st->pwr_down_cached & (1 << chan->channel)));
+}
+
+static ssize_t ltc2632_write_dac_powerdown(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ const char *buf,
+ size_t len)
+{
+ bool pwr_down;
+ int ret;
+ struct ltc2632_state *st = iio_priv(indio_dev);
+
+ ret = strtobool(buf, &pwr_down);
+ if (ret)
+ return ret;
+
+ if (pwr_down)
+ st->pwr_down_cached |= (1 << chan->channel);
+ else
+ st->pwr_down_cached &= ~(1 << chan->channel);
+
+ ret = ltc2632_spi_write(st->spi_dev,
+ LTC2632_CMD_POWERDOWN_DAC_N,
+ chan->channel, 0, 0);
+
+ return ret ? ret : len;
+}
+
+static const struct iio_info ltc2632_info = {
+ .write_raw = ltc2632_write_raw,
+ .read_raw = ltc2632_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int ltc2632_probe(struct spi_device *spi)
+{
+ struct ltc2632_state *st;
+ struct iio_dev *indio_dev;
+ struct ltc2632_chip_info* chip_info;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+ st = iio_priv(indio_dev);
+
+ spi_set_drvdata(spi, indio_dev);
+ st->spi_dev = spi;
+
+ chip_info = (struct ltc2632_chip_info*)
+ spi_get_device_id(spi)->driver_data;
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->info = <c2632_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = chip_info->channels;
+ indio_dev->num_channels = LTC2632_DAC_CHANNELS;
+
+ ret = ltc2632_spi_write(spi, LTC2632_CMD_INTERNAL_REFER, 0, 0, 0);
+ if (ret)
+ dev_err(&spi->dev,
+ "Set internal reference command failed, %d\n", ret);
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ltc2632_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+ iio_device_unregister(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id ltc2632_id[] = {
+ { "ltc2632-l12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L12] },
+ { "ltc2632-l10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L10] },
+ { "ltc2632-l8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L8] },
+ { "ltc2632-h12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H12] },
+ { "ltc2632-h10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H10] },
+ { "ltc2632-h8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H8] },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ltc2632_id);
+
+static struct spi_driver ltc2632_driver = {
+ .driver = {
+ .name = "ltc2632",
+ },
+ .probe = ltc2632_probe,
+ .remove = ltc2632_remove,
+ .id_table = ltc2632_id,
+};
+module_spi_driver(ltc2632_driver);
+
+static const struct of_device_id ltc2632_of_match[] = {
+ { .compatible = "lltc,ltc2632-l12", .data = (void*)<c2632_chip_info_tbl[ID_LTC2632L12] },
+ { .compatible = "lltc,ltc2632-l10", .data = (void*)<c2632_chip_info_tbl[ID_LTC2632L10] },
+ { .compatible = "lltc,ltc2632-l8", .data = (void*)<c2632_chip_info_tbl[ID_LTC2632L8] },
+ { .compatible = "lltc,ltc2632-h12", .data = (void*)<c2632_chip_info_tbl[ID_LTC2632H12] },
+ { .compatible = "lltc,ltc2632-h10", .data = (void*)<c2632_chip_info_tbl[ID_LTC2632H10] },
+ { .compatible = "lltc,ltc2632-h8", .data = (void*)<c2632_chip_info_tbl[ID_LTC2632H8] },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ltc2632_of_match);
+
+MODULE_AUTHOR("Maxime Roussin-Belanger <maxime.roussinbelanger@xxxxxxxxx>");
+MODULE_DESCRIPTION("LTC2632 DAC SPI driver");
+MODULE_LICENSE("GPL v2");
--
2.10.0
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
