[PATCH] staging: iio: ad9832: Moved contents of header file to source file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The contents of the header file are used only by this single source file.

Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
---
 drivers/staging/iio/frequency/ad9832.c | 117 +++++++++++++++++++++++++++++-
 drivers/staging/iio/frequency/ad9832.h | 128 ---------------------------------
 2 files changed, 116 insertions(+), 129 deletions(-)
 delete mode 100644 drivers/staging/iio/frequency/ad9832.h

diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index a5b2f06..1b26843 100644
--- a/drivers/staging/iio/frequency/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -20,7 +20,122 @@
 #include <linux/iio/sysfs.h>
 #include "dds.h"
 
-#include "ad9832.h"
+/* Registers */
+
+#define AD9832_FREQ0LL		0x0
+#define AD9832_FREQ0HL		0x1
+#define AD9832_FREQ0LM		0x2
+#define AD9832_FREQ0HM		0x3
+#define AD9832_FREQ1LL		0x4
+#define AD9832_FREQ1HL		0x5
+#define AD9832_FREQ1LM		0x6
+#define AD9832_FREQ1HM		0x7
+#define AD9832_PHASE0L		0x8
+#define AD9832_PHASE0H		0x9
+#define AD9832_PHASE1L		0xA
+#define AD9832_PHASE1H		0xB
+#define AD9832_PHASE2L		0xC
+#define AD9832_PHASE2H		0xD
+#define AD9832_PHASE3L		0xE
+#define AD9832_PHASE3H		0xF
+
+#define AD9832_PHASE_SYM	0x10
+#define AD9832_FREQ_SYM		0x11
+#define AD9832_PINCTRL_EN	0x12
+#define AD9832_OUTPUT_EN	0x13
+
+/* Command Control Bits */
+
+#define AD9832_CMD_PHA8BITSW	0x1
+#define AD9832_CMD_PHA16BITSW	0x0
+#define AD9832_CMD_FRE8BITSW	0x3
+#define AD9832_CMD_FRE16BITSW	0x2
+#define AD9832_CMD_FPSELECT	0x6
+#define AD9832_CMD_SYNCSELSRC	0x8
+#define AD9832_CMD_SLEEPRESCLR	0xC
+
+#define AD9832_FREQ		BIT(11)
+#define AD9832_PHASE(x)		(((x) & 3) << 9)
+#define AD9832_SYNC		BIT(13)
+#define AD9832_SELSRC		BIT(12)
+#define AD9832_SLEEP		BIT(13)
+#define AD9832_RESET		BIT(12)
+#define AD9832_CLR		BIT(11)
+#define CMD_SHIFT		12
+#define ADD_SHIFT		8
+#define AD9832_FREQ_BITS	32
+#define AD9832_PHASE_BITS	12
+#define RES_MASK(bits)		((1 << (bits)) - 1)
+
+/**
+ * struct ad9832_state - driver instance specific data
+ * @spi:		spi_device
+ * @avdd:		supply regulator for the analog section
+ * @dvdd:		supply regulator for the digital section
+ * @mclk:		external master clock
+ * @ctrl_fp:		cached frequency/phase control word
+ * @ctrl_ss:		cached sync/selsrc control word
+ * @ctrl_src:		cached sleep/reset/clr word
+ * @xfer:		default spi transfer
+ * @msg:		default spi message
+ * @freq_xfer:		tuning word spi transfer
+ * @freq_msg:		tuning word spi message
+ * @phase_xfer:		tuning word spi transfer
+ * @phase_msg:		tuning word spi message
+ * @data:		spi transmit buffer
+ * @phase_data:		tuning word spi transmit buffer
+ * @freq_data:		tuning word spi transmit buffer
+ */
+
+struct ad9832_state {
+	struct spi_device		*spi;
+	struct regulator		*avdd;
+	struct regulator		*dvdd;
+	unsigned long			mclk;
+	unsigned short			ctrl_fp;
+	unsigned short			ctrl_ss;
+	unsigned short			ctrl_src;
+	struct spi_transfer		xfer;
+	struct spi_message		msg;
+	struct spi_transfer		freq_xfer[4];
+	struct spi_message		freq_msg;
+	struct spi_transfer		phase_xfer[2];
+	struct spi_message		phase_msg;
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	union {
+		__be16			freq_data[4]____cacheline_aligned;
+		__be16			phase_data[2];
+		__be16			data;
+	};
+};
+
+/*
+ * TODO: struct ad9832_platform_data needs to go into include/linux/iio
+ */
+
+/**
+ * struct ad9832_platform_data - platform specific information
+ * @mclk:		master clock in Hz
+ * @freq0:		power up freq0 tuning word in Hz
+ * @freq1:		power up freq1 tuning word in Hz
+ * @phase0:		power up phase0 value [0..4095] correlates with 0..2PI
+ * @phase1:		power up phase1 value [0..4095] correlates with 0..2PI
+ * @phase2:		power up phase2 value [0..4095] correlates with 0..2PI
+ * @phase3:		power up phase3 value [0..4095] correlates with 0..2PI
+ */
+
+struct ad9832_platform_data {
+	unsigned long		mclk;
+	unsigned long		freq0;
+	unsigned long		freq1;
+	unsigned short		phase0;
+	unsigned short		phase1;
+	unsigned short		phase2;
+	unsigned short		phase3;
+};
 
 static unsigned long ad9832_calc_freqreg(unsigned long mclk, unsigned long fout)
 {
diff --git a/drivers/staging/iio/frequency/ad9832.h b/drivers/staging/iio/frequency/ad9832.h
deleted file mode 100644
index 1b08b04..0000000
--- a/drivers/staging/iio/frequency/ad9832.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * AD9832 SPI DDS driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-#ifndef IIO_DDS_AD9832_H_
-#define IIO_DDS_AD9832_H_
-
-/* Registers */
-
-#define AD9832_FREQ0LL		0x0
-#define AD9832_FREQ0HL		0x1
-#define AD9832_FREQ0LM		0x2
-#define AD9832_FREQ0HM		0x3
-#define AD9832_FREQ1LL		0x4
-#define AD9832_FREQ1HL		0x5
-#define AD9832_FREQ1LM		0x6
-#define AD9832_FREQ1HM		0x7
-#define AD9832_PHASE0L		0x8
-#define AD9832_PHASE0H		0x9
-#define AD9832_PHASE1L		0xA
-#define AD9832_PHASE1H		0xB
-#define AD9832_PHASE2L		0xC
-#define AD9832_PHASE2H		0xD
-#define AD9832_PHASE3L		0xE
-#define AD9832_PHASE3H		0xF
-
-#define AD9832_PHASE_SYM	0x10
-#define AD9832_FREQ_SYM		0x11
-#define AD9832_PINCTRL_EN	0x12
-#define AD9832_OUTPUT_EN	0x13
-
-/* Command Control Bits */
-
-#define AD9832_CMD_PHA8BITSW	0x1
-#define AD9832_CMD_PHA16BITSW	0x0
-#define AD9832_CMD_FRE8BITSW	0x3
-#define AD9832_CMD_FRE16BITSW	0x2
-#define AD9832_CMD_FPSELECT	0x6
-#define AD9832_CMD_SYNCSELSRC	0x8
-#define AD9832_CMD_SLEEPRESCLR	0xC
-
-#define AD9832_FREQ		BIT(11)
-#define AD9832_PHASE(x)		(((x) & 3) << 9)
-#define AD9832_SYNC		BIT(13)
-#define AD9832_SELSRC		BIT(12)
-#define AD9832_SLEEP		BIT(13)
-#define AD9832_RESET		BIT(12)
-#define AD9832_CLR		BIT(11)
-#define CMD_SHIFT		12
-#define ADD_SHIFT		8
-#define AD9832_FREQ_BITS	32
-#define AD9832_PHASE_BITS	12
-#define RES_MASK(bits)		((1 << (bits)) - 1)
-
-/**
- * struct ad9832_state - driver instance specific data
- * @spi:		spi_device
- * @avdd:		supply regulator for the analog section
- * @dvdd:		supply regulator for the digital section
- * @mclk:		external master clock
- * @ctrl_fp:		cached frequency/phase control word
- * @ctrl_ss:		cached sync/selsrc control word
- * @ctrl_src:		cached sleep/reset/clr word
- * @xfer:		default spi transfer
- * @msg:		default spi message
- * @freq_xfer:		tuning word spi transfer
- * @freq_msg:		tuning word spi message
- * @phase_xfer:		tuning word spi transfer
- * @phase_msg:		tuning word spi message
- * @data:		spi transmit buffer
- * @phase_data:		tuning word spi transmit buffer
- * @freq_data:		tuning word spi transmit buffer
- */
-
-struct ad9832_state {
-	struct spi_device		*spi;
-	struct regulator		*avdd;
-	struct regulator		*dvdd;
-	unsigned long			mclk;
-	unsigned short			ctrl_fp;
-	unsigned short			ctrl_ss;
-	unsigned short			ctrl_src;
-	struct spi_transfer		xfer;
-	struct spi_message		msg;
-	struct spi_transfer		freq_xfer[4];
-	struct spi_message		freq_msg;
-	struct spi_transfer		phase_xfer[2];
-	struct spi_message		phase_msg;
-	/*
-	 * DMA (thus cache coherency maintenance) requires the
-	 * transfer buffers to live in their own cache lines.
-	 */
-	union {
-		__be16			freq_data[4]____cacheline_aligned;
-		__be16			phase_data[2];
-		__be16			data;
-	};
-};
-
-/*
- * TODO: struct ad9832_platform_data needs to go into include/linux/iio
- */
-
-/**
- * struct ad9832_platform_data - platform specific information
- * @mclk:		master clock in Hz
- * @freq0:		power up freq0 tuning word in Hz
- * @freq1:		power up freq1 tuning word in Hz
- * @phase0:		power up phase0 value [0..4095] correlates with 0..2PI
- * @phase1:		power up phase1 value [0..4095] correlates with 0..2PI
- * @phase2:		power up phase2 value [0..4095] correlates with 0..2PI
- * @phase3:		power up phase3 value [0..4095] correlates with 0..2PI
- */
-
-struct ad9832_platform_data {
-	unsigned long		mclk;
-	unsigned long		freq0;
-	unsigned long		freq1;
-	unsigned short		phase0;
-	unsigned short		phase1;
-	unsigned short		phase2;
-	unsigned short		phase3;
-};
-
-#endif /* IIO_DDS_AD9832_H_ */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux