[PATCH v3 7/8] dt-bindings: iio: document envelope-detector bindings

[Peter Rosin <peda@xxxxxxxxxx>]

Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
 .../bindings/iio/adc/envelope-detector.txt         | 54 ++++++++++++++++++++++
 MAINTAINERS                                        |  6 +++
 2 files changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/envelope-detector.txt

diff --git a/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
new file mode 100644
index 000000000000..27544bdd4478
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
@@ -0,0 +1,54 @@
+Bindings for ADC envelope detector using a DAC and a comparator
+
+The DAC is used to find the peak level of an alternating voltage input
+signal by a binary search using the output of a comparator wired to
+an interrupt pin. Like so:
+                          _
+                         | \
+    input +------>-------|+ \
+                         |   \
+           .-------.     |    }---.
+           |       |     |   /    |
+           |    dac|-->--|- /     |
+           |       |     |_/      |
+           |       |              |
+           |       |              |
+           |    irq|------<-------'
+           |       |
+           '-------'
+
+Required properties:
+- compatible: Should be "axentia,tse850-envelope-detector"
+- io-channels: Channel node of the dac to be used for comparator input.
+- io-channel-names: Should be "dac".
+- interrupt specification for one client interrupt,
+  see ../../interrupt-controller/interrupts.txt for details.
+- interrupt-names: Should be "comp".
+
+Example:
+
+	&i2c {
+		dpot: mcp4651-104@28 {
+			compatible = "microchip,mcp4651-104";
+			reg = <0x28>;
+			#io-channel-cells = <1>;
+		};
+	};
+
+	dac: dac {
+		compatible = "dpot-dac";
+		vref-supply = <&reg_3v3>;
+		io-channels = <&dpot 0>;
+		io-channel-names = "dpot";
+		#io-channel-cells = <1>;
+	};
+
+	envelope-detector {
+		compatible = "axentia,tse850-envelope-detector";
+		io-channels = <&dac 0>;
+		io-channel-names = "dac";
+
+		interrupt-parent = <&gpio>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "comp";
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index d7375f45ff0f..fca35d16037d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6119,6 +6119,12 @@ F:	Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac
 F:	Documentation/devicetree/bindings/iio/dac/dpot-dac.txt
 F:	drivers/iio/dac/dpot-dac.c
 
+IIO ENVELOPE DETECTOR
+M:	Peter Rosin <peda@xxxxxxxxxx>
+L:	linux-iio@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
+
 IIO SUBSYSTEM AND DRIVERS
 M:	Jonathan Cameron <jic23@xxxxxxxxxx>
 R:	Hartmut Knaack <knaack.h@xxxxxx>
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html