Re: [PATCH v3 2/4] drivers: iio: ti_am335x_adc: add dma support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/10/16 09:52, Mugunthan V N wrote:
> On Sunday 09 October 2016 02:00 PM, Jonathan Cameron wrote:
>> On 05/10/16 10:04, Mugunthan V N wrote:
>>> This patch adds the required pieces to ti_am335x_adc driver for
>>> DMA support
>>>
>>> Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
>> Hi,
>>
>> Just the one question inline.  I'll also need an Ack from Lee as
>> this touches code in mfd (as does the previous patch).
>> We have obviously missed this merge window, so no particular rush.
Question answered below.  So just need that Ack from Lee.


>>
>> Otherwise, looking very nice indeed.  Got to get my BBB out and play
>> with this now ;)
>>
>> Jonathan
>>> ---
>>>  drivers/iio/adc/ti_am335x_adc.c      | 148 ++++++++++++++++++++++++++++++++++-
>>>  include/linux/mfd/ti_am335x_tscadc.h |   7 ++
>>>  2 files changed, 152 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
>>> index c3cfacca..ad9dec3 100644
>>> --- a/drivers/iio/adc/ti_am335x_adc.c
>>> +++ b/drivers/iio/adc/ti_am335x_adc.c
>>> @@ -30,10 +30,28 @@
>>>  #include <linux/iio/buffer.h>
>>>  #include <linux/iio/kfifo_buf.h>
>>>  
>>> +#include <linux/dmaengine.h>
>>> +#include <linux/dma-mapping.h>
>>> +
>>> +#define DMA_BUFFER_SIZE		SZ_2K
>>> +
>>> +struct tiadc_dma {
>>> +	struct dma_slave_config	conf;
>>> +	struct dma_chan		*chan;
>>> +	dma_addr_t		addr;
>>> +	dma_cookie_t		cookie;
>>> +	u8			*buf;
>>> +	int			current_period;
>>> +	int			period_size;
>>> +	u8			fifo_thresh;
>>> +};
>>> +
>>>  struct tiadc_device {
>>>  	struct ti_tscadc_dev *mfd_tscadc;
>>> +	struct tiadc_dma dma;
>>>  	struct mutex fifo1_lock; /* to protect fifo access */
>>>  	int channels;
>>> +	int total_ch_enabled;
>>>  	u8 channel_line[8];
>>>  	u8 channel_step[8];
>>>  	int buffer_en_ch_steps;
>>> @@ -198,6 +216,67 @@ static irqreturn_t tiadc_worker_h(int irq, void *private)
>>>  	return IRQ_HANDLED;
>>>  }
>>>  
>>> +static void tiadc_dma_rx_complete(void *param)
>>> +{
>>> +	struct iio_dev *indio_dev = param;
>>> +	struct tiadc_device *adc_dev = iio_priv(indio_dev);
>>> +	struct tiadc_dma *dma = &adc_dev->dma;
>>> +	u8 *data;
>>> +	int i;
>>> +
>>> +	data = dma->buf + dma->current_period * dma->period_size;
>>> +	dma->current_period = 1 - dma->current_period; /* swap the buffer ID */
>>> +
>>> +	for (i = 0; i < dma->period_size; i += indio_dev->scan_bytes) {
>>> +		iio_push_to_buffers(indio_dev, data);
>>> +		data += indio_dev->scan_bytes;
>>> +	}
>> Hmm. Another case for the mooted iio_push_to_buffers_multi. Guess
>> we should move on with that one ;)
>>> +}
>>> +
>>> +static int tiadc_start_dma(struct iio_dev *indio_dev)
>>> +{
>>> +	struct tiadc_device *adc_dev = iio_priv(indio_dev);
>>> +	struct tiadc_dma *dma = &adc_dev->dma;
>>> +	struct dma_async_tx_descriptor *desc;
>>> +
>>> +	dma->current_period = 0; /* We start to fill period 0 */
>>> +	/*
>>> +	 * Make the fifo thresh as the multiple of total number of
>>> +	 * channels enabled, so make sure that cyclic DMA period
>>> +	 * length is also a multiple of total number of channels
>>> +	 * enabled. This ensures that no invalid data is reported
>>> +	 * to the stack via iio_push_to_buffers().
>>> +	 */
>>> +	dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
>>> +				     adc_dev->total_ch_enabled) - 1;
>>> +	/* Make sure that period length is multiple of fifo thresh level */
>>> +	dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
>>> +				    (dma->fifo_thresh + 1) * sizeof(u16));
>>> +
>>> +	dma->conf.src_maxburst = dma->fifo_thresh + 1;
>>> +	dmaengine_slave_config(dma->chan, &dma->conf);
>>> +
>>> +	desc = dmaengine_prep_dma_cyclic(dma->chan, dma->addr,
>>> +					 dma->period_size * 2,
>>> +					 dma->period_size, DMA_DEV_TO_MEM,
>>> +					 DMA_PREP_INTERRUPT);
>>> +	if (!desc)
>>> +		return -EBUSY;
>>> +
>>> +	desc->callback = tiadc_dma_rx_complete;
>>> +	desc->callback_param = indio_dev;
>>> +
>>> +	dma->cookie = dmaengine_submit(desc);
>>> +
>>> +	dma_async_issue_pending(dma->chan);
>>> +
>>> +	tiadc_writel(adc_dev, REG_FIFO1THR, dma->fifo_thresh);
>>> +	tiadc_writel(adc_dev, REG_DMA1REQ, dma->fifo_thresh);
>>> +	tiadc_writel(adc_dev, REG_DMAENABLE_SET, DMA_FIFO1);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>>  static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
>>>  {
>>>  	struct tiadc_device *adc_dev = iio_priv(indio_dev);
>>> @@ -218,20 +297,30 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
>>>  static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
>>>  {
>>>  	struct tiadc_device *adc_dev = iio_priv(indio_dev);
>>> +	struct tiadc_dma *dma = &adc_dev->dma;
>>> +	unsigned int irq_enable;
>>>  	unsigned int enb = 0;
>>>  	u8 bit;
>>>  
>>>  	tiadc_step_config(indio_dev);
>>> -	for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels)
>>> +	for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels) {
>>>  		enb |= (get_adc_step_bit(adc_dev, bit) << 1);
>>> +		adc_dev->total_ch_enabled++;
>>> +	}
>>>  	adc_dev->buffer_en_ch_steps = enb;
>>>  
>>> +	if (dma->chan)
>>> +		tiadc_start_dma(indio_dev);
>>> +
>>>  	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
>>>  
>>>  	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
>>>  				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
>>> -	tiadc_writel(adc_dev,  REG_IRQENABLE, IRQENB_FIFO1THRES
>>> -				| IRQENB_FIFO1OVRRUN);
>>> +
>>> +	irq_enable = IRQENB_FIFO1OVRRUN;
>>> +	if (!dma->chan)
>>> +		irq_enable |= IRQENB_FIFO1THRES;
>> This changes the non dma behaviour as we no longer set IRQENB_FIFO1THRES.
>> Why?  Was it wrong before?
> 
> In non DMA case, dms->chan will be NULL and IRQENB_FIFO1THRES interrupt
> will be enabled to pop the ADC samples.
> 
oops.  Thanks for pointing out how I'd misread this!
So just after the ack from Lee now.
Jonathan
> Regards
> Mugunthan V N
> 
>>> +	tiadc_writel(adc_dev,  REG_IRQENABLE, irq_enable);
>>>  
>>>  	return 0;
>>>  }
>>> @@ -239,12 +328,18 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
>>>  static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
>>>  {
>>>  	struct tiadc_device *adc_dev = iio_priv(indio_dev);
>>> +	struct tiadc_dma *dma = &adc_dev->dma;
>>>  	int fifo1count, i, read;
>>>  
>>>  	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
>>>  				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
>>>  	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
>>>  	adc_dev->buffer_en_ch_steps = 0;
>>> +	adc_dev->total_ch_enabled = 0;
>>> +	if (dma->chan) {
>>> +		tiadc_writel(adc_dev, REG_DMAENABLE_CLEAR, 0x2);
>>> +		dmaengine_terminate_async(dma->chan);
>>> +	}
>>>  
>>>  	/* Flush FIFO of leftover data in the time it takes to disable adc */
>>>  	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
>>> @@ -430,6 +525,41 @@ static const struct iio_info tiadc_info = {
>>>  	.driver_module = THIS_MODULE,
>>>  };
>>>  
>>> +static int tiadc_request_dma(struct platform_device *pdev,
>>> +			     struct tiadc_device *adc_dev)
>>> +{
>>> +	struct tiadc_dma	*dma = &adc_dev->dma;
>>> +	dma_cap_mask_t		mask;
>>> +
>>> +	/* Default slave configuration parameters */
>>> +	dma->conf.direction = DMA_DEV_TO_MEM;
>>> +	dma->conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
>>> +	dma->conf.src_addr = adc_dev->mfd_tscadc->tscadc_phys_base + REG_FIFO1;
>>> +
>>> +	dma_cap_zero(mask);
>>> +	dma_cap_set(DMA_CYCLIC, mask);
>>> +
>>> +	/* Get a channel for RX */
>>> +	dma->chan = dma_request_chan(adc_dev->mfd_tscadc->dev, "fifo1");
>>> +	if (IS_ERR(dma->chan)) {
>>> +		int ret = PTR_ERR(dma->chan);
>>> +
>>> +		dma->chan = NULL;
>>> +		return ret;
>>> +	}
>>> +
>>> +	/* RX buffer */
>>> +	dma->buf = dma_alloc_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE,
>>> +				      &dma->addr, GFP_KERNEL);
>>> +	if (!dma->buf)
>>> +		goto err;
>>> +
>>> +	return 0;
>>> +err:
>>> +	dma_release_channel(dma->chan);
>>> +	return -ENOMEM;
>>> +}
>>> +
>>>  static int tiadc_parse_dt(struct platform_device *pdev,
>>>  			  struct tiadc_device *adc_dev)
>>>  {
>>> @@ -512,8 +642,14 @@ static int tiadc_probe(struct platform_device *pdev)
>>>  
>>>  	platform_set_drvdata(pdev, indio_dev);
>>>  
>>> +	err = tiadc_request_dma(pdev, adc_dev);
>>> +	if (err && err == -EPROBE_DEFER)
>>> +		goto err_dma;
>>> +
>>>  	return 0;
>>>  
>>> +err_dma:
>>> +	iio_device_unregister(indio_dev);
>>>  err_buffer_unregister:
>>>  	tiadc_iio_buffered_hardware_remove(indio_dev);
>>>  err_free_channels:
>>> @@ -525,8 +661,14 @@ static int tiadc_remove(struct platform_device *pdev)
>>>  {
>>>  	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>>>  	struct tiadc_device *adc_dev = iio_priv(indio_dev);
>>> +	struct tiadc_dma *dma = &adc_dev->dma;
>>>  	u32 step_en;
>>>  
>>> +	if (dma->chan) {
>>> +		dma_free_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE,
>>> +				  dma->buf, dma->addr);
>>> +		dma_release_channel(dma->chan);
>>> +	}
>>>  	iio_device_unregister(indio_dev);
>>>  	tiadc_iio_buffered_hardware_remove(indio_dev);
>>>  	tiadc_channels_remove(indio_dev);
>>> diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
>>> index e45a208..b9a53e0 100644
>>> --- a/include/linux/mfd/ti_am335x_tscadc.h
>>> +++ b/include/linux/mfd/ti_am335x_tscadc.h
>>> @@ -23,6 +23,8 @@
>>>  #define REG_IRQENABLE		0x02C
>>>  #define REG_IRQCLR		0x030
>>>  #define REG_IRQWAKEUP		0x034
>>> +#define REG_DMAENABLE_SET	0x038
>>> +#define REG_DMAENABLE_CLEAR	0x03c
>>>  #define REG_CTRL		0x040
>>>  #define REG_ADCFSM		0x044
>>>  #define REG_CLKDIV		0x04C
>>> @@ -36,6 +38,7 @@
>>>  #define REG_FIFO0THR		0xE8
>>>  #define REG_FIFO1CNT		0xF0
>>>  #define REG_FIFO1THR		0xF4
>>> +#define REG_DMA1REQ		0xF8
>>>  #define REG_FIFO0		0x100
>>>  #define REG_FIFO1		0x200
>>>  
>>> @@ -126,6 +129,10 @@
>>>  #define FIFOREAD_DATA_MASK (0xfff << 0)
>>>  #define FIFOREAD_CHNLID_MASK (0xf << 16)
>>>  
>>> +/* DMA ENABLE/CLEAR Register */
>>> +#define DMA_FIFO0		BIT(0)
>>> +#define DMA_FIFO1		BIT(1)
>>> +
>>>  /* Sequencer Status */
>>>  #define SEQ_STATUS BIT(5)
>>>  #define CHARGE_STEP		0x11
>>>
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux