On 10/10/16 08:19, Brian Masney wrote: > Change multiline comments from: > > /* line1 > * line2 > * ... > */ > > to > > /* > * line1 > * line2 > * ... > */ > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> Applied to the togreg branch of iio.git and pushed out as testing. Thanks, Jonathan > --- > drivers/staging/iio/light/isl29018.c | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c > index 130f222..132de8e 100644 > --- a/drivers/staging/iio/light/isl29018.c > +++ b/drivers/staging/iio/light/isl29018.c > @@ -564,7 +564,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip) > return status; > } > > - /* Code added per Intersil Application Note 1534: > + /* > + * Code added per Intersil Application Note 1534: > * When VDD sinks to approximately 1.8V or below, some of > * the part's registers may change their state. When VDD > * recovers to 2.25V (or greater), the part may thus be in an > @@ -591,7 +592,8 @@ static int isl29018_chip_init(struct isl29018_chip *chip) > return status; > } > > - /* See Intersil AN1534 comments above. > + /* > + * See Intersil AN1534 comments above. > * "Operating Mode" (COMMAND1) register is reprogrammed when > * data is read from the device. > */ > @@ -773,7 +775,8 @@ static int isl29018_suspend(struct device *dev) > > mutex_lock(&chip->lock); > > - /* Since this driver uses only polling commands, we are by default in > + /* > + * Since this driver uses only polling commands, we are by default in > * auto shutdown (ie, power-down) mode. > * So we do not have much to do here. > */ > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
