On 30/09/16 14:19, Tomas Novotny wrote:
> Signed-off-by: Tomas Novotny <tomas@xxxxxxxxxx>
> ---
> .../devicetree/bindings/iio/dac/mcp4725.txt | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/dac/mcp4725.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/mcp4725.txt b/Documentation/devicetree/bindings/iio/dac/mcp4725.txt
> new file mode 100644
> index 0000000..69c9462
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/mcp4725.txt
> @@ -0,0 +1,28 @@
> +Microchpip mcp4725 and mcp4726 DAC device driver
> +
> +Required properties:
> + - compatible: Must be "microchip,mcp4725" or "microchip,mcp4726"
> + - reg: Should contain the DAC I2C address
> + - vref-millivolt: Value of the reference voltage
> +
> +Optional properties:
> + - vref-mode: Reference voltage selection. It is available only on
Not a generic attribute, so wants to have a vendor prefix on it.
> + mcp4726. Valid values are:
> + - 0, 1: Vdd pin voltage (unbuffered)
This should not be a direct mapping of the register values but rather
a means to control the setting. Having two values mapping to the
same thing makes no sense.
Would also be odd to specify a vref and then not use it. So you could
infer this first option.
> + - 2: Vref pin voltage unbuffered
> + - 3: Vref pin voltage internally buffered
Having inferred the first option then this becomes control of whether it
is buffered or not. So could be named appropriately to cover that.
Might be nice to have a little note here on why you might want the
buffer or not..
> +
> +Examples:
> +
> + mcp4725@60 {
> + compatible = "microchip,mcp4725";
> + reg = <0x60>;
> + vref-millivolt = <3300>;
> + };
> +
> + mcp4726@60 {
> + compatible = "microchip,mcp4726";
> + reg = <0x60>;
> + vref-mode = <2>;
> + vref-millivolt = <2500>;
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
