On Wed, Aug 31, 2016 at 2:05 PM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>
> On Thu, 18 Aug 2016, Ksenija Stanojevic wrote:
>
> > Add core files for mxs-lradc MFD driver.
> >
> > Note: this patch won't compile in iio/testing without this patch:
> > a8f447be8056 ("mfd: Add resource managed APIs for mfd_add_devices")
> >
> > Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
> > ---
> > Changes in v5:
> > - use DEFINE_RES_MEM
> > - don't pass ioreammaped adress to platform cells
> > - move comment outside of struct mxs_lradc
> > - change type of argument in mxs_lradc_reg_set, mxs_lradc_reg_clear,
> > mxs_lradc_reg_wrt (struct mxs_lradc * -> void __iomem *)
> >
> > Changes in v4:
> > - update copyright
> > - use DEFINE_RES_IRQ_NAMED
> > - remove mxs_lradc_add_device function
> > - use struct mfd_cell in static form
> > - improve spacing
> > - remove unnecessary comment
> > - remove platform_get_irq
> > - remove touch_ret and use ret instead
> > - rename use_touchscreen to touchscreen_wire
> > - use goto statements
> > - remove irq[13], irq_count and irq_name from struct mxs_lradc
> > - remove all defines from inside the struct definition
> >
> > Changes in v3:
> > - add note to commit message
> > - move switch statement into if(touch_ret == 0) branch
> > - add MODULE_AUTHOR
> >
> > Changes in v2:
> > - do not change spacing in Kconfig
> > - make struct mfd_cell part of struct mxs_lradc
> > - use switch instead of if in mxs_lradc_irq_mask
> > - use only necessary header files in mxs_lradc.h
> > - use devm_mfd_add_device
> > - use separate function to register mfd device
> > - change licence to GPL
> > - add copyright
> >
> > drivers/mfd/Kconfig | 17 +++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/mxs-lradc.c | 255 ++++++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/mxs-lradc.h | 194 ++++++++++++++++++++++++++++++++
> > 4 files changed, 467 insertions(+)
> > create mode 100644 drivers/mfd/mxs-lradc.c
> > create mode 100644 include/linux/mfd/mxs-lradc.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 9ca66de..ffe14ef 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -271,6 +271,23 @@ config MFD_MC13XXX_I2C
> > help
> > Select this if your MC13xxx is connected via an I2C bus.
> >
> > +config MFD_MXS_LRADC
> > + tristate "Freescale i.MX23/i.MX28 LRADC"
> > + depends on ARCH_MXS || COMPILE_TEST
> > + select MFD_CORE
> > + select STMP_DEVICE
> > + help
> > + Say yes here to build support for the Low Resolution
> > + Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28
> > + processors. This driver provides common support for accessing the
> > + device, additional drivers must be enabled in order to use the
> > + functionality of the device:
> > + mxs-lradc-adc for ADC readings
> > + mxs-lradc-ts for touchscreen support
> > +
> > + This driver can also be built as a module. If so, the module will be
> > + called mxs-lradc.
> > +
> > config MFD_HI6421_PMIC
> > tristate "HiSilicon Hi6421 PMU/Codec IC"
> > depends on OF
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 0f230a6..ecf6399 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -198,3 +198,4 @@ intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> > intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> > +obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
> > diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c
> > new file mode 100644
> > index 0000000..268c48d
> > --- /dev/null
> > +++ b/drivers/mfd/mxs-lradc.c
> > @@ -0,0 +1,255 @@
> > +/*
> > + * Freescale MXS LRADC driver
> > + *
> > + * Copyright (c) 2012 DENX Software Engineering, GmbH.
>
> This needs an update.
>
> > + * Authors:
> > + * Marek Vasut <marex@xxxxxxx>
> > + * Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
>
> Nit: Add 2 ' 's before the names.
>
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/device.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/mfd/mxs-lradc.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#define MXS_LRADC_BASE 0x80050000
> > +
> > +enum mx23_lradc_irqs {
> > + MX23_LRADC_TS_IRQ = 0,
> > + MX23_LRADC_CH0_IRQ,
> > + MX23_LRADC_CH1_IRQ,
> > + MX23_LRADC_CH2_IRQ,
> > + MX23_LRADC_CH3_IRQ,
> > + MX23_LRADC_CH4_IRQ,
> > + MX23_LRADC_CH5_IRQ,
> > + MX23_LRADC_CH6_IRQ,
> > + MX23_LRADC_CH7_IRQ,
> > +};
> > +
> > +enum mx28_lradc_irqs {
> > + MX28_LRADC_TS_IRQ = 0,
> > + MX28_LRADC_TRESH0_IRQ,
> > + MX28_LRADC_TRESH1_IRQ,
> > + MX28_LRADC_CH0_IRQ,
> > + MX28_LRADC_CH1_IRQ,
> > + MX28_LRADC_CH2_IRQ,
> > + MX28_LRADC_CH3_IRQ,
> > + MX28_LRADC_CH4_IRQ,
> > + MX28_LRADC_CH5_IRQ,
> > + MX28_LRADC_CH6_IRQ,
> > + MX28_LRADC_CH7_IRQ,
> > + MX28_LRADC_BUTTON0_IRQ,
> > + MX28_LRADC_BUTTON1_IRQ,
> > +};
> > +
> > +static struct resource mx23_adc_resources[] = {
> > + DEFINE_RES_MEM(MXS_LRADC_BASE, 0x1fff),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH0_IRQ, "mxs-lradc-channel0"),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH1_IRQ, "mxs-lradc-channel1"),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH2_IRQ, "mxs-lradc-channel2"),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH3_IRQ, "mxs-lradc-channel3"),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH4_IRQ, "mxs-lradc-channel4"),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH5_IRQ, "mxs-lradc-channel5"),
> > +};
> > +
> > +static struct resource mx23_touchscreen_resources[] = {
> > + DEFINE_RES_MEM(MXS_LRADC_BASE, 0x1fff),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_TS_IRQ, "mxs-lradc-touchscreen"),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH6_IRQ, "mxs-lradc-channel6"),
> > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH7_IRQ, "mxs-lradc-channel7"),
> > +};
> > +
> > +static struct resource mx28_adc_resources[] = {
> > + DEFINE_RES_MEM(MXS_LRADC_BASE, 0x1fff),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TRESH0_IRQ, "mxs-lradc-thresh0"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TRESH1_IRQ, "mxs-lradc-thresh1"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH0_IRQ, "mxs-lradc-channel0"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH1_IRQ, "mxs-lradc-channel1"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH2_IRQ, "mxs-lradc-channel2"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH3_IRQ, "mxs-lradc-channel3"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH4_IRQ, "mxs-lradc-channel4"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH5_IRQ, "mxs-lradc-channel5"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_BUTTON0_IRQ, "mxs-lradc-button0"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_BUTTON1_IRQ, "mxs-lradc-button1"),
> > +};
> > +
> > +static struct resource mx28_touchscreen_resources[] = {
> > + DEFINE_RES_MEM(MXS_LRADC_BASE, 0x1fff),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TS_IRQ, "mxs-lradc-touchscreen"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH6_IRQ, "mxs-lradc-channel6"),
> > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH7_IRQ, "mxs-lradc-channel7"),
> > +};
> > +
> > +static struct mfd_cell mx23_cells[] = {
> > + {
> > + .name = "mxs-lradc-adc",
> > + .resources = mx23_adc_resources,
> > + .num_resources = ARRAY_SIZE(mx23_adc_resources),
> > + },
> > + {
> > + .name = "mxs-lradc-ts",
> > + .resources = mx23_touchscreen_resources,
> > + .num_resources = ARRAY_SIZE(mx23_touchscreen_resources),
> > + },
> > +};
> > +
> > +static struct mfd_cell mx28_cells[] = {
> > + {
> > + .name = "mxs-lradc-adc",
> > + .resources = mx28_adc_resources,
> > + .num_resources = ARRAY_SIZE(mx28_adc_resources),
> > + },
> > + {
> > + .name = "mxs-lradc-ts",
> > + .resources = mx28_touchscreen_resources,
> > + .num_resources = ARRAY_SIZE(mx28_touchscreen_resources),
> > + }
> > +};
> > +
> > +static const struct of_device_id mxs_lradc_dt_ids[] = {
> > + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
> > + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
> > +
> > +static int mxs_lradc_probe(struct platform_device *pdev)
> > +{
> > + const struct of_device_id *of_id;
> > + struct device *dev = &pdev->dev;
> > + struct device_node *node = dev->of_node;
> > + struct mxs_lradc *lradc;
> > + struct mfd_cell *cells = NULL;
> > + int ret = 0;
> > + u32 ts_wires = 0;
> > +
> > + lradc = devm_kzalloc(&pdev->dev, sizeof(*lradc), GFP_KERNEL);
> > + if (!lradc)
> > + return -ENOMEM;
> > +
> > + of_id = of_match_device(mxs_lradc_dt_ids, &pdev->dev);
> > + lradc->soc = (enum mxs_lradc_id)of_id->data;
>
> Unnecessary cast.
If I remove the cast I get this error:
drivers/mfd/mxs-lradc.c:148:13: error: incompatible types when
assigning to type ‘enum mxs_lradc_id’ from type ‘const void * const’
> > + lradc->clk = devm_clk_get(&pdev->dev, NULL);
> > + if (IS_ERR(lradc->clk)) {
> > + dev_err(dev, "Failed to get the delay unit clock\n");
> > + return PTR_ERR(lradc->clk);
> > + }
> > +
> > + ret = clk_prepare_enable(lradc->clk);
> > + if (ret != 0) {
>
> if (ret)
>
> > + dev_err(dev, "Failed to enable the delay unit clock\n");
> > + return ret;
> > + }
> > +
> > + ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires",
> > + &ts_wires);
>
> Superfluous '\n'
>
> if (!ret)
>
> > + if (ret == 0) {
> > + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
> > +
> > + switch (ts_wires) {
> > + case 4:
> > + lradc->touchscreen_wire = MXS_LRADC_TOUCHSCREEN_4WIRE;
> > + break;
> > + case 5:
> > + if (lradc->soc == IMX28_LRADC) {
> > + lradc->touchscreen_wire =
> > + MXS_LRADC_TOUCHSCREEN_5WIRE;
> > + break;
> > + }
> > + /* fall through to an error message for i.MX23 */
> > + default:
> > + dev_err(&pdev->dev,
> > + "Unsupported number of touchscreen wires (%d)\n"
> > + , ts_wires);
> > + ret = -EINVAL;
> > + goto err_clk;
> > + }
> > + } else {
> > + lradc->buffer_vchans = BUFFER_VCHANS_ALL;
> > + }
> > +
> > + platform_set_drvdata(pdev, lradc);
> > +
> > + switch (lradc->soc) {
> > + case IMX23_LRADC:
> > + cells = mx23_cells;
> > + break;
> > + case IMX28_LRADC:
> > + cells = mx28_cells;
> > + break;
> > + default:
>
> Error message here.
>
> > + ret = -EINVAL;
>
> -ENODEV
>
> > + goto err_clk;
> > + }
> > +
> > + cells[0].platform_data = lradc;
> > + cells[0].pdata_size = sizeof(*lradc);
> > +
> > + ret = devm_mfd_add_devices(&pdev->dev, -1, &cells[0], 1, NULL, 0, NULL);
>
> Use the #defines, not -1.
>
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to add the ADC subdevice\n");
> > + goto err_clk;
> > + }
> > +
> > + if (!lradc->touchscreen_wire)
> > + return 0;
> > +
> > + cells[1].platform_data = lradc;
> > + cells[1].pdata_size = sizeof(*lradc);
> > +
> > + ret = devm_mfd_add_devices(&pdev->dev, -1, &cells[1], 1, NULL, 0, NULL);
>
> As above.
>
> > + if (ret) {
> > + dev_err(&pdev->dev,
> > + "Failed to add the touchscreen subdevice\n");
> > + goto err_clk;
> > + }
> > +
> > + return 0;
> > +
> > +err_clk:
> > + clk_disable_unprepare(lradc->clk);
> > +
> > + return ret;
> > +}
> > +
> > +static int mxs_lradc_remove(struct platform_device *pdev)
> > +{
> > + struct mxs_lradc *lradc = platform_get_drvdata(pdev);
> > +
> > + clk_disable_unprepare(lradc->clk);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver mxs_lradc_driver = {
> > + .driver = {
> > + .name = "mxs-lradc",
> > + .of_match_table = mxs_lradc_dt_ids,
> > + },
> > + .probe = mxs_lradc_probe,
> > + .remove = mxs_lradc_remove,
> > +};
> > +module_platform_driver(mxs_lradc_driver);
> > +
> > +MODULE_AUTHOR("Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>");
> > +MODULE_DESCRIPTION("Freescale i.MX23/i.MX28 LRADC driver");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:mxs-lradc");
> > diff --git a/include/linux/mfd/mxs-lradc.h b/include/linux/mfd/mxs-lradc.h
> > new file mode 100644
> > index 0000000..928f355
> > --- /dev/null
> > +++ b/include/linux/mfd/mxs-lradc.h
> > @@ -0,0 +1,194 @@
> > +/*
> > + * Freescale MXS LRADC driver
> > + *
> > + * Copyright (c) 2012 DENX Software Engineering, GmbH.
>
> Update required.
>
> > + * Author: Marek Vasut <marex@xxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#ifndef __MFD_MXS_LRADC_H
> > +#define __MFD_MXS_LRADC_H
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/io.h>
> > +#include <linux/stmp_device.h>
> > +
> > +#define LRADC_MAX_DELAY_CHANS 4
> > +#define LRADC_MAX_MAPPED_CHANS 8
> > +#define LRADC_MAX_TOTAL_CHANS 16
> > +
> > +#define LRADC_DELAY_TIMER_HZ 2000
> > +
> > +#define LRADC_CTRL0 0x00
> > +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23)
> > +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22)
> > +# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21)
> > +# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20)
> > +# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19)
> > +# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18)
> > +# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17)
> > +# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16)
> > +
> > +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20)
> > +# define LRADC_CTRL0_MX23_YM BIT(19)
> > +# define LRADC_CTRL0_MX23_XM BIT(18)
> > +# define LRADC_CTRL0_MX23_YP BIT(17)
> > +# define LRADC_CTRL0_MX23_XP BIT(16)
> > +
> > +# define LRADC_CTRL0_MX28_PLATE_MASK \
> > + (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
> > + LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
> > + LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
> > + LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
> > +
> > +# define LRADC_CTRL0_MX23_PLATE_MASK \
> > + (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
> > + LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
> > + LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
> > +
> > +#define LRADC_CTRL1 0x10
> > +#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24)
> > +#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16))
> > +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16)
> > +#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16)
> > +#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16
> > +#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8)
> > +#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n))
> > +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff
> > +#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff
> > +#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0
> > +
> > +#define LRADC_CTRL2 0x20
> > +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24
> > +#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15)
> > +
> > +#define LRADC_STATUS 0x40
> > +#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0)
> > +
> > +#define LRADC_CH(n) (0x50 + (0x10 * (n)))
> > +#define LRADC_CH_ACCUMULATE BIT(29)
> > +#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24)
> > +#define LRADC_CH_NUM_SAMPLES_OFFSET 24
> > +#define LRADC_CH_NUM_SAMPLES(x) \
> > + ((x) << LRADC_CH_NUM_SAMPLES_OFFSET)
> > +#define LRADC_CH_VALUE_MASK 0x3ffff
> > +#define LRADC_CH_VALUE_OFFSET 0
> > +
> > +#define LRADC_DELAY(n) (0xd0 + (0x10 * (n)))
> > +#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24)
> > +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24
> > +#define LRADC_DELAY_TRIGGER(x) \
> > + (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \
> > + LRADC_DELAY_TRIGGER_LRADCS_MASK)
> > +#define LRADC_DELAY_KICK BIT(20)
> > +#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16)
> > +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16
> > +#define LRADC_DELAY_TRIGGER_DELAYS(x) \
> > + (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \
> > + LRADC_DELAY_TRIGGER_DELAYS_MASK)
> > +#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11)
> > +#define LRADC_DELAY_LOOP_COUNT_OFFSET 11
> > +#define LRADC_DELAY_LOOP(x) \
> > + (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \
> > + LRADC_DELAY_LOOP_COUNT_MASK)
> > +#define LRADC_DELAY_DELAY_MASK 0x7ff
> > +#define LRADC_DELAY_DELAY_OFFSET 0
> > +#define LRADC_DELAY_DELAY(x) \
> > + (((x) << LRADC_DELAY_DELAY_OFFSET) & \
> > + LRADC_DELAY_DELAY_MASK)
> > +
> > +#define LRADC_CTRL4 0x140
> > +#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4))
> > +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4)
> > +#define LRADC_CTRL4_LRADCSELECT(n, x) \
> > + (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \
> > + LRADC_CTRL4_LRADCSELECT_MASK(n))
> > +
> > +#define LRADC_RESOLUTION 12
> > +#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1)
> > +
> > +#define BUFFER_VCHANS_LIMITED 0x3f
> > +#define BUFFER_VCHANS_ALL 0xff
> > +
> > + /*
> > + * Certain LRADC channels are shared between touchscreen
> > + * and/or touch-buttons and generic LRADC block. Therefore when using
> > + * either of these, these channels are not available for the regular
> > + * sampling. The shared channels are as follows:
> > + *
> > + * CH0 -- Touch button #0
> > + * CH1 -- Touch button #1
> > + * CH2 -- Touch screen XPUL
> > + * CH3 -- Touch screen YPLL
> > + * CH4 -- Touch screen XNUL
> > + * CH5 -- Touch screen YNLR
> > + * CH6 -- Touch screen WIPER (5-wire only)
> > + *
> > + * The bit fields below represents which parts of the LRADC block are
> > + * switched into special mode of operation. These channels can not
> > + * be sampled as regular LRADC channels. The driver will refuse any
> > + * attempt to sample these channels.
> > + */
> > +#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0))
> > +#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2)
> > +#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2)
> > +
> > +enum mxs_lradc_id {
> > + IMX23_LRADC,
> > + IMX28_LRADC,
> > +};
> > +
> > +enum mxs_lradc_ts_wires {
> > + MXS_LRADC_TOUCHSCREEN_NONE = 0,
> > + MXS_LRADC_TOUCHSCREEN_4WIRE,
> > + MXS_LRADC_TOUCHSCREEN_5WIRE,
> > +};
> > +
> > +struct mxs_lradc {
> > + enum mxs_lradc_id soc;
> > + struct clk *clk;
> > + u8 buffer_vchans;
> > +
> > + enum mxs_lradc_ts_wires touchscreen_wire;
> > + bool use_touchbutton;
> > +};
>
> A kernel-doc header would be helpful.
>
> > +static inline void mxs_lradc_reg_set(void __iomem *base, u32 val, u32 reg)
> > +{
> > + writel(val, base + reg + STMP_OFFSET_REG_SET);
> > +}
> > +
> > +static inline void mxs_lradc_reg_clear(void __iomem *base, u32 val,
> > + u32 reg)
> > +{
> > + writel(val, base + reg + STMP_OFFSET_REG_CLR);
> > +}
> > +
> > +static inline void mxs_lradc_reg_wrt(void __iomem *base, u32 val, u32 reg)
> > +{
> > + writel(val, base + reg);
> > +}
> > +
> > +static inline u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
> > +{
> > + switch (lradc->soc) {
> > + case IMX23_LRADC:
> > + return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
> > + case IMX28_LRADC:
> > + return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
> > + default:
> > + return 0;
> > + }
> > +}
> > +
> > +#endif /* __MXS_LRADC_H */
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
