On 18/07/16 08:02, Enric Balletbo i Serra wrote:
> Handle Light and Proximity sensors presented by the ChromeOS EC Sensor hub.
> Creates an IIO device for each functions.
>
> Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxxx>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Few more nitpicks, but basically the same as the previous..
Jonathan
> ---
> drivers/iio/common/cros_ec_sensors/Kconfig | 9 +
> drivers/iio/common/cros_ec_sensors/Makefile | 1 +
> .../common/cros_ec_sensors/cros_ec_light_prox.c | 288 +++++++++++++++++++++
> 3 files changed, 298 insertions(+)
> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_light_prox.c
>
> diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
> index 18002d6..02559d2 100644
> --- a/drivers/iio/common/cros_ec_sensors/Kconfig
> +++ b/drivers/iio/common/cros_ec_sensors/Kconfig
> @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
> Accelerometers, Gyroscope and Magnetometer that are
> presented by the ChromeOS EC Sensor hub.
> Creates an IIO device for each functions.
> +
> +config IIO_CROS_EC_LIGHT_PROX
> + tristate "ChromeOS EC Light and Proximity Sensors"
> + select IIO_CROS_EC_SENSORS_CORE
> + help
> + Module to handle Light and Proximity sensors
> + presented by the ChromeOS EC Sensor hub.
> + Creates an IIO device for each functions.
> + Only one source is exposed by the EC.
> diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
> index ec716ff..7aaf2a2 100644
> --- a/drivers/iio/common/cros_ec_sensors/Makefile
> +++ b/drivers/iio/common/cros_ec_sensors/Makefile
> @@ -4,3 +4,4 @@
>
> obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
> obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
> +obj-$(CONFIG_IIO_CROS_EC_LIGHT_PROX) += cros_ec_light_prox.o
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_light_prox.c b/drivers/iio/common/cros_ec_sensors/cros_ec_light_prox.c
> new file mode 100644
> index 0000000..333e927
> --- /dev/null
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_light_prox.c
> @@ -0,0 +1,288 @@
> +/*
> + * cros_ec_light_proxmity - Driver for light and prox sensors behing CrOS EC.
> + *
> + * Copyright (C) 2015 Google, Inc
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * This driver uses the cros-ec interface to communicate with the Chrome OS
> + * EC about accelerometer data. Accelerometer access is presented through
> + * iio sysfs.
Fix this comment as I doubt this driver does that ;)
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/kfifo_buf.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/cros_ec.h>
> +#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/platform_device.h>
> +
> +#include "cros_ec_sensors_core.h"
> +
> +/*
> + * We only represent one entry for light or proximity.
> + * EC is merging different light sensors to return the
> + * what the eye would see.
> + * For proximity, we currently support only one light source.
> + */
> +#define MAX_CHANNELS (1 + 1)
> +
> +/* State data for ec_sensors iio driver. */
> +struct cros_ec_sensors_state {
> + /* Shared by all sensors */
> + struct cros_ec_sensors_core_state core;
> +
> + struct iio_chan_spec channels[MAX_CHANNELS];
> +};
> +
> +static int cros_ec_light_prox_read(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct cros_ec_sensors_state *st = iio_priv(indio_dev);
> + u16 data = 0;
> + s64 val64;
> + int ret = IIO_VAL_INT;
> + int idx = chan->scan_index;
> +
> + mutex_lock(&st->core.cmd_lock);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + if (cros_ec_sensors_read_cmd(indio_dev, 1 << idx,
> + (s16 *)&data) < 0)
> + ret = -EIO;
> + *val = data;
> + break;
> + case IIO_CHAN_INFO_CALIBBIAS:
> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
> + st->core.param.sensor_offset.flags = 0;
> +
> + if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
> + ret = -EIO;
> + break;
> + }
> +
> + /* Save values */
> + st->core.calib[0].offset =
> + st->core.resp->sensor_offset.offset[0];
> +
> + *val = st->core.calib[idx].offset;
> + break;
> + case IIO_CHAN_INFO_CALIBSCALE:
> + /*
> + * RANGE is used for calibration
> + * scalse is a number x.y, where x is coded on 16bits,
> + * y coded on 16 bits, between 0 and 9999.
> + */
> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
> + st->core.param.sensor_range.data =
> + EC_MOTION_SENSE_NO_VALUE;
> +
> + if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
> + ret = -EIO;
> + break;
> + }
> + val64 = st->core.resp->sensor_range.ret;
> + *val = val64 >> 16;
> + *val2 = (val64 & 0xffff) * 100;
> + ret = IIO_VAL_INT_PLUS_MICRO;
> + break;
> + case IIO_CHAN_INFO_SCALE:
> + /* Light: Result in Lux, using calibration multiplier */
> + /* Prox: Result in cm. */
> + *val = 1;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + ret = cros_ec_sensors_core_read(
> + &st->core, chan, val, val2, mask);
> + break;
> + }
> + mutex_unlock(&st->core.cmd_lock);
> + return ret;
> +}
> +
> +static int cros_ec_light_prox_write(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct cros_ec_sensors_state *st = iio_priv(indio_dev);
> + int ret = 0;
> + int idx = chan->scan_index;
> +
> + mutex_lock(&st->core.cmd_lock);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_CALIBBIAS:
> + st->core.calib[idx].offset = val;
> + /* Send to EC for each axis, even if not complete */
> +
> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
> + st->core.param.sensor_offset.flags =
> + MOTION_SENSE_SET_OFFSET;
> + st->core.param.sensor_offset.offset[0] =
> + st->core.calib[0].offset;
> + st->core.param.sensor_offset.temp =
> + EC_MOTION_SENSE_INVALID_CALIB_TEMP;
> +
> + if (cros_ec_motion_send_host_cmd(&st->core, 0))
> + ret = -EIO;
> + break;
> + case IIO_CHAN_INFO_CALIBSCALE:
> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
> + st->core.param.sensor_range.data = (val << 16) | (val2 / 100);
> + if (cros_ec_motion_send_host_cmd(&st->core, 0))
> + ret = -EIO;
> + break;
> + default:
> + ret = cros_ec_sensors_core_write(
> + &st->core, chan, val, val2, mask);
> + break;
> + }
> +
> + mutex_unlock(&st->core.cmd_lock);
> + return ret;
> +}
> +
> +static const struct iio_info ec_sensors_info = {
> + .read_raw = &cros_ec_light_prox_read,
> + .write_raw = &cros_ec_light_prox_write,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int cros_ec_sensors_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
> + struct cros_ec_device *ec_device;
> + struct iio_dev *indio_dev;
> + struct cros_ec_sensors_state *state;
> + struct iio_chan_spec *channel;
> + int ret;
> +
> + if (!ec_dev || !ec_dev->ec_dev) {
> + dev_warn(&pdev->dev, "No CROS EC device found.\n");
> + return -EINVAL;
> + }
> + ec_device = ec_dev->ec_dev;
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> +
> + ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
> + if (ret)
> + return ret;
> +
> + indio_dev->info = &ec_sensors_info;
> + state = iio_priv(indio_dev);
> + state->core.type = state->core.resp->info.type;
> + state->core.loc = state->core.resp->info.location;
> + channel = state->channels;
perhaps a blank line here for readability?
> + /* common part */
> + channel->info_mask_separate =
> + BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_CALIBBIAS) |
> + BIT(IIO_CHAN_INFO_CALIBSCALE);
> + channel->info_mask_shared_by_all =
> + BIT(IIO_CHAN_INFO_SCALE) |
> + BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> + BIT(IIO_CHAN_INFO_FREQUENCY);
> + channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
> + channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
> + channel->scan_type.shift = 0;
> + channel->scan_index = 0;
> + channel->ext_info = cros_ec_sensors_ext_info;
> + channel->scan_type.sign = 'u';
> +
> + state->core.calib[0].offset = 0;
> +
> + /* sensor specific */
> + switch (state->core.type) {
> + case MOTIONSENSE_TYPE_LIGHT:
> + channel->type = IIO_LIGHT;
> + break;
> + case MOTIONSENSE_TYPE_PROX:
> + channel->type = IIO_PROXIMITY;
> + break;
> + default:
> + dev_warn(&pdev->dev, "unknown\n");
> + return -EINVAL;
> + }
> +
> + /* Timestamp */
> + channel++;
> + channel->type = IIO_TIMESTAMP;
> + channel->channel = -1;
> + channel->scan_index = 1;
> + channel->scan_type.sign = 's';
> + channel->scan_type.realbits = 64;
> + channel->scan_type.storagebits = 64;
> +
> + indio_dev->channels = state->channels;
> + indio_dev->num_channels = MAX_CHANNELS;
> +
> + state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
> +
> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
> + cros_ec_sensors_capture, NULL);
> + if (ret)
> + return ret;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret)
> + iio_triggered_buffer_cleanup(indio_dev);
> + return ret;
> +}
> +
> +static int cros_ec_sensors_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +
> + iio_device_unregister(indio_dev);
> + iio_triggered_buffer_cleanup(indio_dev);
blank line here please + similar locations.
> + return 0;
> +}
> +
> +static const struct platform_device_id cros_ec_sensors_ids[] = {
> + {
> + .name = "cros-ec-prox",
> + },
> + {
> + .name = "cros-ec-light",
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
> +
> +static struct platform_driver cros_ec_sensors_platform_driver = {
> + .driver = {
> + .name = "cros-ec-light-prox",
> + .pm = &cros_ec_sensors_pm_ops,
> + },
> + .probe = cros_ec_sensors_probe,
> + .remove = cros_ec_sensors_remove,
> + .id_table = cros_ec_sensors_ids,
> +};
> +module_platform_driver(cros_ec_sensors_platform_driver);
> +
> +MODULE_DESCRIPTION("ChromeOS EC light/proximity sensors driver");
> +MODULE_LICENSE("GPL v2");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
