[PATCH 04/10] iio: cros_ec: Add common functions for cros_ec sensors.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the core functions to be able to support the sensors attached behind
the ChromeOS Embedded Controller and used by other IIO cros-ec sensor
drivers.

The cros_ec_sensor_core driver matches with current driver in ChromeOS
4.4 tree, so it includes all the fixes at the moment. The support for
this driver was made by Gwendal Grignou. The original patch and all the
fixes has been squashed and rebased on top of mainline.

Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxxx>
[eballetbo: split, squash and rebase on top of mainline the patches
found in ChromeOS tree]
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---
 drivers/iio/common/Kconfig                         |   1 +
 drivers/iio/common/Makefile                        |   1 +
 drivers/iio/common/cros_ec_sensors/Kconfig         |  14 +
 drivers/iio/common/cros_ec_sensors/Makefile        |   5 +
 .../common/cros_ec_sensors/cros_ec_sensors_core.c  | 564 +++++++++++++++++++++
 .../common/cros_ec_sensors/cros_ec_sensors_core.h  | 155 ++++++
 6 files changed, 740 insertions(+)
 create mode 100644 drivers/iio/common/cros_ec_sensors/Kconfig
 create mode 100644 drivers/iio/common/cros_ec_sensors/Makefile
 create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
 create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h

diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig
index 26a6026..e108996 100644
--- a/drivers/iio/common/Kconfig
+++ b/drivers/iio/common/Kconfig
@@ -2,6 +2,7 @@
 # IIO common modules
 #
 
+source "drivers/iio/common/cros_ec_sensors/Kconfig"
 source "drivers/iio/common/hid-sensors/Kconfig"
 source "drivers/iio/common/ms_sensors/Kconfig"
 source "drivers/iio/common/ssp_sensors/Kconfig"
diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
index 585da6a..6fa760e 100644
--- a/drivers/iio/common/Makefile
+++ b/drivers/iio/common/Makefile
@@ -7,6 +7,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-y += cros_ec_sensors/
 obj-y += hid-sensors/
 obj-y += ms_sensors/
 obj-y += ssp_sensors/
diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
new file mode 100644
index 0000000..a30f41e
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -0,0 +1,14 @@
+#
+# Chrome OS Embedded Controller managed sensors library
+#
+config IIO_CROS_EC_SENSORS_CORE
+	tristate "ChromeOS EC Sensors Core"
+	depends on SYSFS && MFD_CROS_EC
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Base module for the ChromeOS EC Sensors module.
+	  Contains core functions used by other IIO CrosEC sensor
+	  driver.
+	  Define common attributes and sysfs interrupt handler.
+
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
new file mode 100644
index 0000000..95b6901
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for sensors seen through the ChromeOS EC sensor hub.
+#
+
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
new file mode 100644
index 0000000..cb3de8f
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -0,0 +1,564 @@
+/*
+ * cros_ec_sensors_core - Common function for Chrome OS EC sensor driver.
+ *
+ * Copyright (C) 2015 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about accelerometer data. Accelerometer access is presented through
+ * iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include "cros_ec_sensors_core.h"
+
+static char *cros_ec_loc[] = {
+	[MOTIONSENSE_LOC_BASE] = "base",
+	[MOTIONSENSE_LOC_LID] = "lid",
+	[MOTIONSENSE_LOC_MAX] = "unknown",
+};
+
+/*
+ * cros_ec_sensors_core_init
+ *
+ * Initialize core sensor strucure, fill the response are
+ * with the return of Sensor info.
+ *
+ * @pdev plarform device created for the sensors
+ * @indio_dev iio device structure of the device
+ * @physical_device True if the device refers to a physical device.
+ */
+int cros_ec_sensors_core_init(struct platform_device *pdev,
+			      struct iio_dev *indio_dev,
+			      bool physical_device)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
+	struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
+	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	state->ec = ec->ec_dev;
+	state->msg = devm_kzalloc(&pdev->dev,
+				max((u16)sizeof(struct ec_params_motion_sense),
+				state->ec->max_response), GFP_KERNEL);
+	if (!state->msg)
+		return -ENOMEM;
+
+	state->resp = (struct ec_response_motion_sense *)state->msg->data;
+
+	mutex_init(&state->cmd_lock);
+	/* Set up the host command structure. */
+	state->msg->version = 2;
+	state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+	state->msg->outsize = sizeof(struct ec_params_motion_sense);
+
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = pdev->name;
+
+	if (physical_device) {
+		indio_dev->modes = INDIO_DIRECT_MODE;
+
+		state->param.cmd = MOTIONSENSE_CMD_INFO;
+		state->param.info.sensor_num = sensor_platform->sensor_num;
+		if (cros_ec_motion_send_host_cmd(state, 0)) {
+			dev_warn(dev, "Can not access sensor info\n");
+			return -EIO;
+		}
+		state->type = state->resp->info.type;
+		state->loc = state->resp->info.location;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_init);
+
+/*
+ * cros_ec_motion_send_host_cmd - send motion sense host command
+ *
+ * @st Pointer to state information for device.
+ * @return 0 if ok, -ve on error.
+ *
+ * Note, when called, the sub-command is assumed to be set in param->cmd.
+ */
+int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state,
+				 u16 opt_length)
+{
+	int ret;
+
+	if (opt_length)
+		state->msg->insize = min(opt_length, state->ec->max_response);
+	else
+		state->msg->insize = state->ec->max_response;
+
+	memcpy(state->msg->data, &state->param, sizeof(state->param));
+	/* Send host command. */
+	ret = cros_ec_cmd_xfer_status(state->ec, state->msg);
+	if (ret < 0)
+		return -EIO;
+
+	if (ret &&
+	    state->resp != (struct ec_response_motion_sense *)state->msg->data)
+		memcpy(state->resp, state->msg->data, ret);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_motion_send_host_cmd);
+
+static ssize_t __maybe_unused cros_ec_sensors_flush(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		const char *buf, size_t len)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret = 0;
+	bool flush;
+
+	ret = strtobool(buf, &flush);
+	if (ret < 0)
+		return ret;
+	if (!flush)
+		return -EINVAL;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_FIFO_FLUSH;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	if (ret != 0)
+		dev_warn(&indio_dev->dev, "Unable to flush sensor\n");
+	mutex_unlock(&st->cmd_lock);
+	return ret ? ret : len;
+}
+
+static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		const char *buf, size_t len)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret, i;
+	bool calibrate;
+
+	ret = strtobool(buf, &calibrate);
+	if (ret < 0)
+		return ret;
+	if (!calibrate)
+		return -EINVAL;
+
+	mutex_lock(&st->cmd_lock);
+	st->param.cmd = MOTIONSENSE_CMD_PERFORM_CALIB;
+	ret = cros_ec_motion_send_host_cmd(st, 0);
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to calibrate sensor\n");
+	} else {
+		/* Save values */
+		for (i = X; i < MAX_AXIS; i++)
+			st->calib[i].offset = st->resp->perform_calib.offset[i];
+	}
+	mutex_unlock(&st->cmd_lock);
+	return ret ? ret : len;
+}
+
+static ssize_t cros_ec_sensors_id(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		char *buf)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", st->param.info.sensor_num);
+}
+
+static ssize_t cros_ec_sensors_loc(struct iio_dev *indio_dev,
+		uintptr_t private, const struct iio_chan_spec *chan,
+		char *buf)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	return sprintf(buf, "%s\n", cros_ec_loc[st->loc]);
+}
+
+const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = {
+#ifdef CONFIG_IIO_CROS_EC_SENSORS_RING
+	{
+		.name = "flush",
+		.shared = IIO_SHARED_BY_ALL,
+		.write = cros_ec_sensors_flush
+	},
+#endif
+	{
+		.name = "calibrate",
+		.shared = IIO_SHARED_BY_ALL,
+		.write = cros_ec_sensors_calibrate
+	},
+	{
+		.name = "id",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_id
+	},
+	{
+		.name = "location",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_loc
+	},
+	{ },
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensors_ext_info);
+
+const struct iio_chan_spec_ext_info cros_ec_sensors_limited_info[] = {
+	{
+		.name = "id",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_id
+	},
+	{
+		.name = "location",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = cros_ec_sensors_loc
+	},
+	{ },
+};
+EXPORT_SYMBOL_GPL(cros_ec_sensors_limited_info);
+/*
+ * idx_to_reg - convert sensor index into offset in shared memory region.
+ *
+ * @st: private data
+ * @idx: sensor index (should be element of enum sensor_index)
+ * @return address to read at.
+ */
+static unsigned int idx_to_reg(struct cros_ec_sensors_core_state *st,
+			       unsigned int idx)
+{
+	/*
+	 * When using LPC interface, only space for 2 Accel and one Gyro.
+	 * First halfword of MOTIONSENSE_TYPE_ACCEL is used by angle.
+	 */
+	if (st->type == MOTIONSENSE_TYPE_ACCEL)
+		return EC_MEMMAP_ACC_DATA + sizeof(u16) *
+			(1 + idx + st->param.info.sensor_num *
+			 MAX_AXIS);
+	else
+		return EC_MEMMAP_GYRO_DATA + sizeof(u16) * idx;
+}
+
+static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset,
+			  u8 *dest)
+{
+	return ec->cmd_readmem(ec, offset, 1, dest);
+}
+
+static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset,
+			   u16 *dest)
+{
+	u16 tmp;
+	int ret = ec->cmd_readmem(ec, offset, 2, &tmp);
+
+	*dest = le16_to_cpu(tmp);
+
+	return ret;
+}
+
+/*
+ * read_ec_until_not_busy - read from EC status byte until it reads not busy.
+ *
+ * @st Pointer to state information for device.
+ * @return 8-bit status if ok, -ve on error
+ */
+static int read_ec_until_not_busy(struct cros_ec_sensors_core_state *st)
+{
+	struct cros_ec_device *ec = st->ec;
+	u8 status;
+	int attempts = 0;
+
+	ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
+	while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) {
+		/* Give up after enough attempts, return error. */
+		if (attempts++ >= 50)
+			return -EIO;
+
+		/* Small delay every so often. */
+		if (attempts % 5 == 0)
+			msleep(25);
+
+		ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
+	}
+
+	return status;
+}
+
+/*
+ * read_ec_sensors_data_unsafe - read acceleration data from EC shared memory.
+ *
+ * @st Pointer to state information for device.
+ * @scan_mask Bitmap of the sensor indices to scan.
+ * @data Location to store data.
+ *
+ * Note this is the unsafe function for reading the EC data. It does not
+ * guarantee that the EC will not modify the data as it is being read in.
+ */
+static void read_ec_sensors_data_unsafe(struct iio_dev *indio_dev,
+			 unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	unsigned int i = 0;
+
+	/*
+	 * Read all sensors enabled in scan_mask. Each value is 2
+	 * bytes.
+	 */
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		ec_cmd_read_u16(ec, idx_to_reg(st, i), data);
+		data++;
+	}
+}
+
+/*
+ * cros_ec_sensors_read_lpc - read acceleration data from EC shared memory.
+ *
+ * @st Pointer to state information for device.
+ * @scan_mask Bitmap of the sensor indices to scan.
+ * @data Location to store data.
+ * @return 0 if ok, -ve on error
+ *
+ * Note: this is the safe function for reading the EC data. It guarantees
+ * that the data sampled was not modified by the EC while being read.
+ */
+int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	struct cros_ec_device *ec = st->ec;
+	u8 samp_id = 0xff, status = 0;
+	int attempts = 0;
+
+	/*
+	 * Continually read all data from EC until the status byte after
+	 * all reads reflects that the EC is not busy and the sample id
+	 * matches the sample id from before all reads. This guarantees
+	 * that data read in was not modified by the EC while reading.
+	 */
+	while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT |
+			  EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) {
+		/* If we have tried to read too many times, return error. */
+		if (attempts++ >= 5)
+			return -EIO;
+
+		/* Read status byte until EC is not busy. */
+		status = read_ec_until_not_busy(st);
+		if (status < 0)
+			return status;
+
+		/*
+		 * Store the current sample id so that we can compare to the
+		 * sample id after reading the data.
+		 */
+		samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
+
+		/* Read all EC data, format it, and store it into data. */
+		read_ec_sensors_data_unsafe(indio_dev, scan_mask, data);
+
+		/* Read status byte. */
+		ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_lpc);
+
+int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev,
+			     unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned int i = 0;
+
+	/*
+	 * read all sensor data through a command.
+	 */
+	st->param.cmd = MOTIONSENSE_CMD_DATA;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->data));
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to read sensor data\n");
+		return ret;
+	}
+
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		*data = st->resp->data.data[i];
+		data++;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_read_cmd);
+
+irqreturn_t cros_ec_sensors_capture(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	mutex_lock(&st->cmd_lock);
+	/* Clear capture data. */
+	memset(st->samples, 0, indio_dev->scan_bytes);
+
+	/* Read data based on which channels are enabled in scan mask. */
+	st->read_ec_sensors_data(indio_dev, *(indio_dev->active_scan_mask),
+			   (s16 *)st->samples);
+
+	/* Store the timestamp last 8 bytes of data. */
+	if (indio_dev->scan_timestamp)
+		*(s64 *)&st->samples[round_down(indio_dev->scan_bytes -
+						sizeof(s64),
+				     sizeof(s64))] = iio_get_time_ns();
+
+	iio_push_to_buffers(indio_dev, st->samples);
+
+	/*
+	 * Tell the core we are done with this trigger and ready for the
+	 * next one.
+	 */
+	iio_trigger_notify_done(indio_dev->trig);
+	mutex_unlock(&st->cmd_lock);
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_capture);
+
+int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	int ret = IIO_VAL_INT;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+		st->param.ec_rate.data =
+			EC_MOTION_SENSE_NO_VALUE;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		else
+			*val = st->resp->ec_rate.ret;
+		break;
+	case IIO_CHAN_INFO_FREQUENCY:
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data =
+			EC_MOTION_SENSE_NO_VALUE;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		else
+			*val = st->resp->sensor_odr.ret;
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read);
+
+int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_FREQUENCY:
+		st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
+		st->param.sensor_odr.data = val;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->param.sensor_odr.roundup = 1;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+		st->param.ec_rate.data = val;
+
+		if (cros_ec_motion_send_host_cmd(st, 0))
+			ret = -EIO;
+		else
+			st->curr_sampl_freq = val;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
+
+static int __maybe_unused cros_ec_sensors_prepare(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	if (st->curr_sampl_freq == 0)
+		return 0;
+
+	/*
+	 * If the sensors are sampled at high frequency, we will not be able to
+	 * sleep. Set to sampling to a long period if necessary.
+	 */
+	if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
+		mutex_lock(&st->cmd_lock);
+		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+		st->param.ec_rate.data = CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY;
+		cros_ec_motion_send_host_cmd(st, 0);
+		mutex_unlock(&st->cmd_lock);
+	}
+	return 0;
+}
+
+static void __maybe_unused cros_ec_sensors_complete(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+
+	if (st->curr_sampl_freq == 0)
+		return;
+
+	if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
+		mutex_lock(&st->cmd_lock);
+		st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
+		st->param.ec_rate.data = st->curr_sampl_freq;
+		cros_ec_motion_send_host_cmd(st, 0);
+		mutex_unlock(&st->cmd_lock);
+	}
+}
+
+#ifdef CONFIG_PM_SLEEP
+const struct dev_pm_ops cros_ec_sensors_pm_ops = {
+	.prepare = cros_ec_sensors_prepare,
+	.complete = cros_ec_sensors_complete
+};
+#else
+const struct dev_pm_ops cros_ec_sensors_pm_ops = { };
+#endif
+EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
+
+MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
new file mode 100644
index 0000000..53e09e1
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
@@ -0,0 +1,155 @@
+/*
+ * ChromeOS EC sensor hub
+ *
+ * Copyright (C) 2015 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CROS_EC_SENSORS_CORE_H
+#define __CROS_EC_SENSORS_CORE_H
+
+#include <linux/irqreturn.h>
+
+enum {
+	X,
+	Y,
+	Z,
+	MAX_AXIS,
+};
+
+/*
+ * EC returns sensor values using signed 16 bit registers
+ */
+#define CROS_EC_SENSOR_BITS 16
+
+/*
+ * 4 16 bit channels are allowed.
+ * Good enough for current sensors, thye use up to 3 16 bit vectors.
+ */
+#define CROS_EC_SAMPLE_SIZE  (sizeof(s64) * 2)
+
+/*
+ * minimum sampling period to use when device is suspending.
+ */
+#define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000  /* 1 second */
+
+/*
+ * Function to read the sensor data.
+ *
+ * Data can be retrieve using the cros ec command protocol.
+ * Some machines also allow accessing some sensor data via
+ * IO space.
+ */
+typedef int (cros_ec_sensors_read_t)(struct iio_dev *indio_dev,
+		unsigned long scan_mask, s16 *data);
+
+cros_ec_sensors_read_t cros_ec_sensors_read_lpc;
+cros_ec_sensors_read_t cros_ec_sensors_read_cmd;
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_sensors_core_state {
+	struct cros_ec_device *ec;
+	/*
+	 *  Location to store command and response to the EC.
+	 */
+	struct mutex cmd_lock;
+
+	/*
+	 * Statically allocated command structure that holds parameters
+	 * and response.
+	 */
+	struct cros_ec_command *msg;
+	struct ec_params_motion_sense param;
+	struct ec_response_motion_sense *resp;
+
+	/* Type of sensor */
+	enum motionsensor_type type;
+	enum motionsensor_location loc;
+
+	/*
+	 * Calibration parameters. Note that trigger captured data will always
+	 * provide the calibrated values.
+	 */
+	struct calib_data {
+		s16 offset;
+	} calib[MAX_AXIS];
+
+	/*
+	 * Static array to hold data from a single capture. For each
+	 * channel we need 2 bytes, except for the timestamp. The timestamp
+	 * is always last and is always 8-byte aligned.
+	 */
+	u8 samples[CROS_EC_SAMPLE_SIZE];
+
+	/* Pointer to function used for accessing sensors values. */
+	cros_ec_sensors_read_t *read_ec_sensors_data;
+
+	/* Current sampling period */
+	int curr_sampl_freq;
+};
+
+/* Basic initialization of the core structure. */
+int cros_ec_sensors_core_init(struct platform_device *pdev,
+			      struct iio_dev *indio_dev,
+			      bool physical_device);
+
+/*
+ * cros_ec_sensors_capture - the trigger handler function
+ *
+ * @irq: the interrupt number
+ * @p: private data - always a pointer to the poll func.
+ *
+ * On a trigger event occurring, if the pollfunc is attached then this
+ * handler is called as a threaded interrupt (and hence may sleep). It
+ * is responsible for grabbing data from the device and pushing it into
+ * the associated buffer.
+ */
+irqreturn_t cros_ec_sensors_capture(int irq, void *p);
+
+
+/*
+ * cros_ec_motion_send_host_cmd - send motion sense host command
+ *
+ * @st Pointer to state information for device.
+ * @opt_length: optional length: to reduce the response size,
+ *    useful on the data path.
+ *    Otherwise, the maximal allowed response size is used.
+ * @return 0 if ok, -ve on error.
+ *
+ * Note, when called, the sub-command is assumed to be set in param->cmd.
+ */
+int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *st,
+				 u16 opt_length);
+
+/*
+ * cros_ec_sensors_core_read/write: handler for core attributes.
+ *
+ * Handler for attributes identical among sensors:
+ * - frequency,
+ * - sampling_frequency.
+ *
+ * cmd_lock lock must be held.
+ */
+int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask);
+
+int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask);
+
+extern const struct dev_pm_ops cros_ec_sensors_pm_ops;
+
+/* List of extended channel specification for all sensors */
+extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
+extern const struct iio_chan_spec_ext_info cros_ec_sensors_limited_info[];
+
+#endif  /* __CROS_EC_SENSORS_CORE_H */
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux