On Mon, Jul 11, 2016 at 08:18:28PM +0200, Peter Meerwald-Stadler wrote:
>
>> The Measurement Computing CIO-DAC is a family of 12-bit analog output
>> devices. The analog outputs are from AD660BNs with each output buffered
>> by an OP-27. Voltage ranges are configured via physical jumpers on the
>> device.
>>
>> This driver does not support the devices' simulataneous update mode; the
>> XFER jumper option should be deselected for all analog output channels.
>
>out of curiosity: what is CIO?
The CIO prefix is a registered trademark of Measurement Computing
Corporation. However, I don't know what it means specifically; I
speculate CIO stands for Computing Input Output.
>comments below, looks nice & tidy
>
>I guess devicetree config is not fashionable for ISA devices :)
I'm very embarrassed to say that I'm not familiar with devicetree
configs. If you point me to some documentation, I'll be happy to add
support for this device family.
>
>> This driver provides IIO support for the Measurement Computing CIO-DAC
>> family: CIO-DAC16, CIO-DAC08, and PC104-DAC06. The base port addresses
>> for the devices may be configured via the base array module parameter.
>>
>> Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
>> ---
>> MAINTAINERS | 6 ++
>> drivers/iio/dac/Kconfig | 9 +++
>> drivers/iio/dac/Makefile | 1 +
>> drivers/iio/dac/cio-dac.c | 140 ++++++++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 156 insertions(+)
>> create mode 100644 drivers/iio/dac/cio-dac.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 345e757..7280259 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -7318,6 +7318,12 @@ L: linux-iio@xxxxxxxxxxxxxxx
>> S: Maintained
>> F: drivers/iio/potentiometer/mcp4531.c
>>
>> +MEASUREMENT COMPUTING CIO-DAC DAC DRIVER
>
>maybe it is more informative to state
>MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
>(here and below)
That makes sense since this driver utilizes the IIO subsystem after all.
I'll submit a version 2 of this patch with this change.
>
>> +M: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
>> +L: linux-iio@xxxxxxxxxxxxxxx
>> +S: Maintained
>> +F: drivers/iio/dac/cio-dac.c
>> +
>> MEDIA DRIVERS FOR RENESAS - VSP1
>> M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>> L: linux-media@xxxxxxxxxxxxxxx
>> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
>> index ca81447..38ea272 100644
>> --- a/drivers/iio/dac/Kconfig
>> +++ b/drivers/iio/dac/Kconfig
>> @@ -181,6 +181,15 @@ config AD7303
>> To compile this driver as module choose M here: the module will be called
>> ad7303.
>>
>> +config CIO_DAC
>> + tristate "Measurement Computing CIO-DAC DAC driver"
>> + depends on X86 && ISA_BUS_API
>> + help
>> + Say yes here to build support for the Measurement Computing CIO-DAC
>> + analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
>> + base port addresses for the devices may be configured via the base
>> + array module parameter.
>> +
>> config LPC18XX_DAC
>> tristate "NXP LPC18xx DAC driver"
>> depends on ARCH_LPC18XX || COMPILE_TEST
>> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
>> index 8b78d5c..b1a1206 100644
>> --- a/drivers/iio/dac/Makefile
>> +++ b/drivers/iio/dac/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_AD5764) += ad5764.o
>> obj-$(CONFIG_AD5791) += ad5791.o
>> obj-$(CONFIG_AD5686) += ad5686.o
>> obj-$(CONFIG_AD7303) += ad7303.o
>> +obj-$(CONFIG_CIO_DAC) += cio-dac.o
>> obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o
>> obj-$(CONFIG_M62332) += m62332.o
>> obj-$(CONFIG_MAX517) += max517.o
>> diff --git a/drivers/iio/dac/cio-dac.c b/drivers/iio/dac/cio-dac.c
>> new file mode 100644
>> index 0000000..eb52819
>> --- /dev/null
>> +++ b/drivers/iio/dac/cio-dac.c
>> @@ -0,0 +1,140 @@
>> +/*
>> + * DAC driver for the Measurement Computing CIO-DAC
>> + * Copyright (C) 2016 William Breathitt Gray
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License, version 2, as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + *
>> + * This driver supports the following Measurement Computing devices: CIO-DAC16,
>> + * CIO-DAC06, and PC104-DAC06.
>> + */
>> +#include <linux/bitops.h>
>> +#include <linux/device.h>
>> +#include <linux/errno.h>
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/types.h>
>> +#include <linux/io.h>
>> +#include <linux/ioport.h>
>> +#include <linux/isa.h>
>> +#include <linux/module.h>
>> +#include <linux/moduleparam.h>
>> +
>> +#define CIO_DAC_NUM_CHAN 16
>> +
>> +#define CIO_DAC_CHAN(chan) { \
>> + .type = IIO_VOLTAGE, \
>> + .channel = chan, \
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>> + .indexed = 1, \
>> + .output = 1 \
>> +}
>> +
>> +#define CIO_DAC_EXTENT 32
>> +
>> +static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)];
>> +static unsigned int num_cio_dac;
>> +module_param_array(base, uint, &num_cio_dac, 0);
>> +MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses");
>> +
>> +/**
>> + * struct cio_dac_iio - IIO device private data structure
>> + * @chan_out_states: channels' output states
>> + * @base: base port address of the IIO device
>> + */
>> +struct cio_dac_iio {
>> + unsigned int chan_out_states[CIO_DAC_NUM_CHAN];
>> + unsigned int base;
>> +};
>> +
>> +static int cio_dac_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int *val, int *val2, long mask)
>> +{
>> + struct cio_dac_iio *const priv = iio_priv(indio_dev);
>> +
>> + if (mask != IIO_CHAN_INFO_RAW)
>> + return -EINVAL;
>> +
>> + *val = priv->chan_out_states[chan->channel];
>> +
>> + return IIO_VAL_INT;
>> +}
>> +
>> +static int cio_dac_write_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, int val, int val2, long mask)
>> +{
>> + struct cio_dac_iio *const priv = iio_priv(indio_dev);
>> + const unsigned int chan_addr_offset = 2 * chan->channel;
>> +
>> + if (mask != IIO_CHAN_INFO_RAW)
>> + return -EINVAL;
>> +
>
>what unit applies to val? milli volts?
>any range checking?
These devices use physical jumpers to configure the voltage ranges of
the channels. Unfortunately, the set ranges are not exposed via the
registers, so software has no way of knowing what specific range was
selected (+-5V, 0-10V, etc.).
However, since val is simply a 16-bit scale of the configured range, I
can add a conditional check to verify that val holds a value between 0
and 65535 before accepting it.
It looks like I failed to mention the 16-bit resolution of some of the
devices, so I'll add that to the commit message body as well.
>
>> + priv->chan_out_states[chan->channel] = val;
>> + outw(val, priv->base + chan_addr_offset);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct iio_info cio_dac_info = {
>> + .driver_module = THIS_MODULE,
>> + .read_raw = cio_dac_read_raw,
>> + .write_raw = cio_dac_write_raw
>> +};
>> +
>> +static const struct iio_chan_spec cio_dac_channels[CIO_DAC_NUM_CHAN] = {
>> + CIO_DAC_CHAN(0), CIO_DAC_CHAN(1), CIO_DAC_CHAN(2), CIO_DAC_CHAN(3),
>> + CIO_DAC_CHAN(4), CIO_DAC_CHAN(5), CIO_DAC_CHAN(6), CIO_DAC_CHAN(7),
>> + CIO_DAC_CHAN(8), CIO_DAC_CHAN(9), CIO_DAC_CHAN(10), CIO_DAC_CHAN(11),
>> + CIO_DAC_CHAN(12), CIO_DAC_CHAN(13), CIO_DAC_CHAN(14), CIO_DAC_CHAN(15)
>> +};
>> +
>> +static int cio_dac_probe(struct device *dev, unsigned int id)
>> +{
>> + struct iio_dev *indio_dev;
>> + struct cio_dac_iio *priv;
>> + unsigned int i;
>> +
>> + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + if (!devm_request_region(dev, base[id], CIO_DAC_EXTENT,
>> + dev_name(dev))) {
>> + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
>
>maybe 'request' instead of 'lock' (maximum nitpick)
I'll make this change as well while I'm at it.
>
>> + base[id], base[id] + CIO_DAC_EXTENT);
>> + return -EBUSY;
>> + }
>> +
>> + indio_dev->info = &cio_dac_info;
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->channels = cio_dac_channels;
>> + indio_dev->num_channels = CIO_DAC_NUM_CHAN;
>> + indio_dev->name = dev_name(dev);
>> +
>> + priv = iio_priv(indio_dev);
>> + priv->base = base[id];
>> +
>> + /* initialize DAC outputs to 0V */
>> + for (i = 0; i < 32; i += 2)
>> + outw(0, base[id] + i);
>> +
>> + return devm_iio_device_register(dev, indio_dev);
>> +}
>> +
>> +static struct isa_driver cio_dac_driver = {
>> + .probe = cio_dac_probe,
>> + .driver = {
>> + .name = "cio-dac"
>> + }
>> +};
>> +
>> +module_isa_driver(cio_dac_driver, num_cio_dac);
>> +
>> +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@xxxxxxxxx>");
>> +MODULE_DESCRIPTION("Measurement Computing CIO-DAC DAC driver");
>> +MODULE_LICENSE("GPL v2");
>>
>
>--
>
>Peter Meerwald-Stadler
>+43-664-2444418 (mobile)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
