[PATCH] Dyna-Image AL3320A update, add AL3010 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



1. Change al3320a.c to match light sensor test flow.
2. Add al3010.c to add new device AL3010.
   original file copy from al3320a.c

Signed-off-by: Rocky Hsiao <rocky.hsiao@xxxxxxxxxxxxxx>
---
 .../config/x86_64/chromiumos-x86_64.flavour.config |   2 +
 drivers/iio/light/Kconfig                          |  10 +
 drivers/iio/light/Makefile                         |   1 +
 drivers/iio/light/al3010.c                         | 301 +++++++++++++++++++++
 drivers/iio/light/al3320a.c                        |  73 ++++-
 5 files changed, 378 insertions(+), 9 deletions(-)
 create mode 100644 drivers/iio/light/al3010.c

diff --git a/chromeos/config/x86_64/chromiumos-x86_64.flavour.config b/chromeos/config/x86_64/chromiumos-x86_64.flavour.config
index 7d2bed4..7980a14 100644
--- a/chromeos/config/x86_64/chromiumos-x86_64.flavour.config
+++ b/chromeos/config/x86_64/chromiumos-x86_64.flavour.config
@@ -2,6 +2,8 @@
 # Config options generated by splitconfig
 #
 CONFIG_ACERHDF=m
+CONFIG_AL3010=m
+CONFIG_AL3320A=m
 CONFIG_B43=m
 CONFIG_B43_BCMA=y
 CONFIG_B43_BCMA_PIO=y
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index ca89b26..57a2a7e 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -40,6 +40,16 @@ config AL3320A
 	 To compile this driver as a module, choose M here: the
 	 module will be called al3320a.
 
+config AL3010
+	tristate "AL3010 ambient light sensor"
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the Dyna Image AL3010
+	 ambient light sensor.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called al3010.
+
 config APDS9300
 	tristate "APDS9300 ambient light sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 5df1118..3f615d7 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -5,6 +5,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ACPI_ALS)		+= acpi-als.o
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
+obj-$(CONFIG_AL3010)		+= al3010.o
 obj-$(CONFIG_AL3320A)		+= al3320a.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
 obj-$(CONFIG_APDS9960)		+= apds9960.o
diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c
new file mode 100644
index 0000000..2df425b
--- /dev/null
+++ b/drivers/iio/light/al3010.c
@@ -0,0 +1,301 @@
+/*
+ * AL3010 - Dyna Image Ambient Light Sensor
+ *
+ * Copyright (C) 2016 Dyna-Image Corp.
+ *
+ * This software is licedsed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * Note about the original authors:
+ *
+ * This driver is based on the original driver for AL3320A that was distributed
+ * by Intel Corporation.
+ * The following is part of the header found in that file
+ *
+ * >> AL3320A - Dyna Image Ambient Light Sensor
+ *
+ * >> Copyright (c) 2014, Intel Corporation.
+ *
+ * >> This file is subject to the terms and conditions of version 2 of
+ * >> the GNU General Public License.  See the file COPYING in the main
+ * >> directory of this archive for more details.
+ *
+ * >> IIO driver for AL3010 (7-bit I2C slave address 0x1C).
+ *
+ * >> TODO: interrupt support, thresholds
+ *
+ * >> Author:Daniel Baluta <daniel.baluta@xxxxxxxxx>
+ *
+ * The kernel version is 4.4
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define AL3010_DRV_NAME "al3010"
+
+#define AL3010_REG_SYSTEM	0x00
+#define	AL3010_REG_CONFIG	0x10
+#define	AL3010_REG_DATA_LOW	0x0c
+
+#define	AL3010_GAIN_MASK	(BIT(6) | BIT(5) | BIT(4))
+#define	AL3010_GAIN_SHIFT	4
+
+#define AL3010_CONFIG_DISABLE	0x00
+#define AL3010_CONFIG_ENABLE	0x01
+
+#define AL3010_SCALE_AVAILABLE "1.1872 0.2968 0.0742 0.0186"
+
+enum al3010_range {
+	AL3010_RANGE_1, /* 77806 lx */
+	AL3010_RANGE_2, /* 19452 lx  */
+	AL3010_RANGE_3, /* 4863  lx  */
+	AL3010_RANGE_4  /* 1216  lx  */
+};
+
+static const int al3010_scales[][2] = {
+	{0, 1187200}, {0, 296800}, {0, 74200}, {0, 18600}
+};
+
+struct al3010_data {
+	struct i2c_client *client;
+};
+
+static const struct iio_chan_spec al3010_channels[] = {
+	{
+		.type	= IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+	}
+};
+
+static int al3010_set_gain(struct al3010_data *data, int gain)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, AL3010_REG_CONFIG,
+		(gain<<AL3010_GAIN_SHIFT)&AL3010_GAIN_MASK);
+
+	return ret;
+}
+
+static int al3010_set_mode(struct al3010_data *data, int mode)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, AL3010_REG_SYSTEM, mode);
+
+	return ret;
+}
+
+static int al3010_get_mode(struct al3010_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, AL3010_REG_SYSTEM);
+
+	return ret;
+}
+
+static int al3010_get_adc_value(struct al3010_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(data->client, AL3010_REG_DATA_LOW);
+
+	return ret;
+}
+
+static int al3010_get_lux(struct al3010_data *data)
+{
+	int ret;
+	long int ret64;
+
+	ret = al3010_get_adc_value(data);
+	ret64 = ret;
+	ret64 = (ret64 * 74200) / 1000000;
+	ret = ret64;
+
+	return ret;
+}
+
+/* lux */
+static ssize_t al3010_show_lux(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct al3010_data *data = iio_priv(dev_to_iio_dev(dev));
+	int ret;
+
+	/* No LUX data if not operational */
+	if (al3010_get_mode(data) != AL3010_CONFIG_ENABLE)
+		return -EBUSY;
+
+	ret = al3010_get_lux(data);
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static IIO_CONST_ATTR(in_illuminance_scale_available, AL3010_SCALE_AVAILABLE);
+
+static DEVICE_ATTR(illuminance0_input, S_IRUGO, al3010_show_lux, NULL);
+
+static struct attribute *al3010_attributes[] = {
+	&dev_attr_illuminance0_input.attr,
+	&iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group al3010_attribute_group = {
+	.attrs = al3010_attributes,
+};
+
+static int al3010_init(struct al3010_data *data)
+{
+	int err = 0;
+
+	err = al3010_set_mode(data, AL3010_CONFIG_ENABLE);
+	if (err) {
+		dev_err(&data->client->dev,
+			"%s: al3010_set_mode returned error %d\n",
+			__func__, err);
+		return err;
+	}
+
+	/*
+	 * set sensor range to 4863 lux.
+	 * (If panel luminousness is 10% , the range of pad is 0 ~ 48630 lux.)
+	*/
+	err = al3010_set_gain(data, AL3010_RANGE_3);
+	if (err) {
+		dev_err(&data->client->dev,
+			"%s: al3010_set_range returned error %d\n",
+			__func__, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int al3010_read_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, int *val,
+		int *val2, long mask)
+{
+	struct al3010_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		/*
+		 * ALS ADC value is stored in two adjacent registers:
+		 * - low byte of output is stored at AL3320A_REG_DATA_LOW
+		 * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
+		 */
+		ret = i2c_smbus_read_word_data(data->client,
+				AL3010_REG_DATA_LOW);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		ret = i2c_smbus_read_byte_data(data->client,
+				AL3010_REG_CONFIG);
+		if (ret < 0)
+			return ret;
+
+		ret = (ret & AL3010_GAIN_MASK) >> AL3010_GAIN_SHIFT;
+		*val = al3010_scales[ret][0];
+		*val2 = al3010_scales[ret][1];
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int al3010_write_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, int val,
+		int val2, long mask)
+{
+	struct al3010_data *data = iio_priv(indio_dev);
+	int i;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		for (i = 0; i < ARRAY_SIZE(al3010_scales); i++) {
+			if (val == al3010_scales[i][0] &&
+			    val2 == al3010_scales[i][1])
+				return al3010_set_gain(data, i);
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
+static const struct iio_info al3010_info = {
+	.driver_module	= THIS_MODULE,
+	.read_raw	= al3010_read_raw,
+	.write_raw	= al3010_write_raw,
+	.attrs		= &al3010_attribute_group,
+};
+
+static int al3010_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct al3010_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &al3010_info;
+	indio_dev->name = AL3010_DRV_NAME;
+	indio_dev->channels = al3010_channels;
+	indio_dev->num_channels = ARRAY_SIZE(al3010_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = al3010_init(data);
+	if (ret < 0) {
+		dev_err(&client->dev, "al3010 chip init failed\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int al3010_remove(struct i2c_client *client)
+{
+	return i2c_smbus_write_byte_data(client, AL3010_REG_SYSTEM, 0x00);
+}
+
+static const struct i2c_device_id al3010_id[] = {
+	{"al3010", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, al3010_id);
+
+static struct i2c_driver al3010_driver = {
+	.driver = {
+		.name = AL3010_DRV_NAME,
+	},
+	.probe		= al3010_probe,
+	.remove		= al3010_remove,
+	.id_table	= al3010_id,
+};
+
+module_i2c_driver(al3010_driver);
+
+MODULE_AUTHOR("Rocky Hsiao <rocky.hsiao@xxxxxxxxxxxxxx");
+MODULE_DESCRIPTION("AL3010 Ambient Light Sensor driver");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
index 6aac651..4212772 100644
--- a/drivers/iio/light/al3320a.c
+++ b/drivers/iio/light/al3320a.c
@@ -1,16 +1,32 @@
 /*
  * AL3320A - Dyna Image Ambient Light Sensor
  *
- * Copyright (c) 2014, Intel Corporation.
+ * Copyright (C) 2016 Dyna Image Corp.
  *
- * This file is subject to the terms and conditions of version 2 of
- * the GNU General Public License.  See the file COPYING in the main
- * directory of this archive for more details.
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
  *
- * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  *
- * TODO: interrupt support, thresholds
+ * Note about the original authors:
  *
+ * >> Copyright (c) 2014, Intel Corporation.
+ *
+ * >> This file is subject to the terms and conditions of version 2 of
+ * >> the GNU General Public License.  See the file COPYING in the main
+ * >> directory of this archive for more details.
+ *
+ * >> IIO driver for AL3320A (7-bit I2C slave address 0x1C).
+ *
+ * >> TODO: interrupt support, thresholds
+ *
+ * >> Author:Daniel Baluta <daniel.baluta@xxxxxxxxx>
+ *
+ * The kernel version is 4.4
  */
 
 #include <linux/module.h>
@@ -72,9 +88,47 @@ static const struct iio_chan_spec al3320a_channels[] = {
 	}
 };
 
+static int al3320a_get_adc_value(struct al3320a_data *data)
+{
+	int val;
+
+	val = i2c_smbus_read_word_data(data->client, AL3320A_REG_DATA_LOW);
+
+	return val;
+}
+
+static int al3320a_get_lux(struct al3320a_data *data)
+{
+	int ret;
+	long ret64;
+
+	ret = al3320a_get_adc_value(data);
+	ret64 = ret;
+	ret64 = (ret64 * 32000) / 1000000;
+	ret = ret64;
+
+	return  ret;
+}
+
+static ssize_t al3320a_lux_show(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct al3320a_data *data = iio_priv(dev_to_iio_dev(dev));
+	int val;
+
+	val = al3320a_get_lux(data);
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static IIO_DEVICE_ATTR(illuminance0_input, S_IRUGO,
+		al3320a_lux_show, NULL, 0);
+
 static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE);
 
 static struct attribute *al3320a_attributes[] = {
+	&iio_dev_attr_illuminance0_input.dev_attr.attr,
 	&iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
 	NULL,
 };
@@ -125,8 +179,8 @@ static int al3320a_read_raw(struct iio_dev *indio_dev,
 		 * - low byte of output is stored at AL3320A_REG_DATA_LOW
 		 * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
 		 */
-		ret = i2c_smbus_read_word_data(data->client,
-					       AL3320A_REG_DATA_LOW);
+		ret = al3320a_get_adc_value(data);
+
 		if (ret < 0)
 			return ret;
 		*val = ret;
@@ -201,6 +255,7 @@ static int al3320a_probe(struct i2c_client *client,
 		dev_err(&client->dev, "al3320a chip init failed\n");
 		return ret;
 	}
+
 	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
@@ -227,6 +282,6 @@ static struct i2c_driver al3320a_driver = {
 
 module_i2c_driver(al3320a_driver);
 
-MODULE_AUTHOR("Daniel Baluta <daniel.baluta@xxxxxxxxx>");
+MODULE_AUTHOR("Rocky Hsiao <rocky.hsiao@xxxxxxxxxxxxxx>");
 MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
 MODULE_LICENSE("GPL v2");
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux