This series includes two patches: one that adds support for the BMP180 chip, and the second which adds configuration for the oversampling ratio for both BMP180 and BMP280. * v3 - use single line comment style where possible suggested by Jonathan Cameron - remove double casts for calibration coefficients by using adequate data types, suggested by Jonathan Cameron - fix oversampling register setting for bmp280, spotted by Vlad Dogaru * v2 - split into two patches - add error check for reading calibration data. - s/be16_to_cpu(0)/cpu_to_be16(0)/ - default pressure oversampling ratio for bmp180 from x1 to x8 - add kconfig dependency to not select if bmp085-i2c is enabled - create bmp280_chip_info includes all elements depending on the chip - add ACPI ids for bmp180 Akinobu Mita (2): iio: pressure: bmp280: add support for BMP180 iio: pressure: bmp280: add ability to control oversampling rate drivers/iio/pressure/Kconfig | 5 +- drivers/iio/pressure/bmp280.c | 564 +++++++++++++++++++++++++++++++++++++++--- 2 files changed, 538 insertions(+), 31 deletions(-) -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
