Re: [RFC PATCH v1 9/9] iio:st_sensors: fix power regulator usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/04/16 10:18, Gregor Boirie wrote:
> Ensure failure to enable power regulators is properly handled.
> 
> Signed-off-by: Gregor Boirie <gregor.boirie@xxxxxxxxxx>
All looks sensible to me.  I'm happy with the whole series, so will just let
this sit until Denis / others have had plenty of time to look at it.

Jonathan
> ---
>  drivers/iio/accel/st_accel_core.c               | 12 ++++++----
>  drivers/iio/common/st_sensors/st_sensors_core.c | 29 ++++++++++++++++++++-----
>  drivers/iio/gyro/st_gyro_core.c                 | 12 ++++++----
>  drivers/iio/magnetometer/st_magn_core.c         | 12 ++++++----
>  drivers/iio/pressure/st_pressure_core.c         | 12 ++++++----
>  include/linux/iio/common/st_sensors.h           |  2 +-
>  6 files changed, 57 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index dc73f2d..b8d3c3c 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -757,13 +757,15 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
>  	indio_dev->info = &accel_info;
>  	mutex_init(&adata->tb.buf_lock);
>  
> -	st_sensors_power_enable(indio_dev);
> +	err = st_sensors_power_enable(indio_dev);
> +	if (err)
> +		return err;
>  
>  	err = st_sensors_check_device_support(indio_dev,
>  					ARRAY_SIZE(st_accel_sensors_settings),
>  					st_accel_sensors_settings);
>  	if (err < 0)
> -		return err;
> +		goto st_accel_power_off;
>  
>  	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
>  	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
> @@ -780,11 +782,11 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
>  
>  	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
>  	if (err < 0)
> -		return err;
> +		goto st_accel_power_off;
>  
>  	err = st_accel_allocate_ring(indio_dev);
>  	if (err < 0)
> -		return err;
> +		goto st_accel_power_off;
>  
>  	if (irq > 0) {
>  		err = st_sensors_allocate_trigger(indio_dev,
> @@ -807,6 +809,8 @@ st_accel_device_register_error:
>  		st_sensors_deallocate_trigger(indio_dev);
>  st_accel_probe_trigger_error:
>  	st_accel_deallocate_ring(indio_dev);
> +st_accel_power_off:
> +	st_sensors_power_disable(indio_dev);
>  
>  	return err;
>  }
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
> index 6901c7f..286f28c 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -228,7 +228,7 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
>  }
>  EXPORT_SYMBOL(st_sensors_set_axis_enable);
>  
> -void st_sensors_power_enable(struct iio_dev *indio_dev)
> +int st_sensors_power_enable(struct iio_dev *indio_dev)
>  {
>  	struct st_sensor_data *pdata = iio_priv(indio_dev);
>  	int err;
> @@ -237,18 +237,37 @@ void st_sensors_power_enable(struct iio_dev *indio_dev)
>  	pdata->vdd = devm_regulator_get_optional(indio_dev->dev.parent, "vdd");
>  	if (!IS_ERR(pdata->vdd)) {
>  		err = regulator_enable(pdata->vdd);
> -		if (err != 0)
> +		if (err != 0) {
>  			dev_warn(&indio_dev->dev,
>  				 "Failed to enable specified Vdd supply\n");
> +			return err;
> +		}
> +	} else {
> +		err = PTR_ERR(pdata->vdd);
> +		if (err != -ENODEV)
> +			return err;
>  	}
>  
>  	pdata->vdd_io = devm_regulator_get_optional(indio_dev->dev.parent, "vddio");
>  	if (!IS_ERR(pdata->vdd_io)) {
>  		err = regulator_enable(pdata->vdd_io);
> -		if (err != 0)
> +		if (err != 0) {
>  			dev_warn(&indio_dev->dev,
>  				 "Failed to enable specified Vdd_IO supply\n");
> +			goto st_sensors_disable_vdd;
> +		}
> +	} else {
> +		err = PTR_ERR(pdata->vdd_io);
> +		if (err != -ENODEV)
> +			goto st_sensors_disable_vdd;
>  	}
> +
> +	return 0;
> +
> +st_sensors_disable_vdd:
> +	if (!IS_ERR_OR_NULL(pdata->vdd))
> +		regulator_disable(pdata->vdd);
> +	return err;
>  }
>  EXPORT_SYMBOL(st_sensors_power_enable);
>  
> @@ -256,10 +275,10 @@ void st_sensors_power_disable(struct iio_dev *indio_dev)
>  {
>  	struct st_sensor_data *pdata = iio_priv(indio_dev);
>  
> -	if (!IS_ERR(pdata->vdd))
> +	if (!IS_ERR_OR_NULL(pdata->vdd))
>  		regulator_disable(pdata->vdd);
>  
> -	if (!IS_ERR(pdata->vdd_io))
> +	if (!IS_ERR_OR_NULL(pdata->vdd_io))
>  		regulator_disable(pdata->vdd_io);
>  }
>  EXPORT_SYMBOL(st_sensors_power_disable);
> diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
> index be9057e..f07f105 100644
> --- a/drivers/iio/gyro/st_gyro_core.c
> +++ b/drivers/iio/gyro/st_gyro_core.c
> @@ -424,13 +424,15 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
>  	indio_dev->info = &gyro_info;
>  	mutex_init(&gdata->tb.buf_lock);
>  
> -	st_sensors_power_enable(indio_dev);
> +	err = st_sensors_power_enable(indio_dev);
> +	if (err)
> +		return err;
>  
>  	err = st_sensors_check_device_support(indio_dev,
>  					ARRAY_SIZE(st_gyro_sensors_settings),
>  					st_gyro_sensors_settings);
>  	if (err < 0)
> -		return err;
> +		goto st_gyro_power_off;
>  
>  	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
>  	gdata->multiread_bit = gdata->sensor_settings->multi_read_bit;
> @@ -444,11 +446,11 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
>  	err = st_sensors_init_sensor(indio_dev,
>  				(struct st_sensors_platform_data *)&gyro_pdata);
>  	if (err < 0)
> -		return err;
> +		goto st_gyro_power_off;
>  
>  	err = st_gyro_allocate_ring(indio_dev);
>  	if (err < 0)
> -		return err;
> +		goto st_gyro_power_off;
>  
>  	if (irq > 0) {
>  		err = st_sensors_allocate_trigger(indio_dev,
> @@ -471,6 +473,8 @@ st_gyro_device_register_error:
>  		st_sensors_deallocate_trigger(indio_dev);
>  st_gyro_probe_trigger_error:
>  	st_gyro_deallocate_ring(indio_dev);
> +st_gyro_power_off:
> +	st_sensors_power_disable(indio_dev);
>  
>  	return err;
>  }
> diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
> index 62036d2..7c94adc 100644
> --- a/drivers/iio/magnetometer/st_magn_core.c
> +++ b/drivers/iio/magnetometer/st_magn_core.c
> @@ -588,13 +588,15 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
>  	indio_dev->info = &magn_info;
>  	mutex_init(&mdata->tb.buf_lock);
>  
> -	st_sensors_power_enable(indio_dev);
> +	err = st_sensors_power_enable(indio_dev);
> +	if (err)
> +		return err;
>  
>  	err = st_sensors_check_device_support(indio_dev,
>  					ARRAY_SIZE(st_magn_sensors_settings),
>  					st_magn_sensors_settings);
>  	if (err < 0)
> -		return err;
> +		goto st_magn_power_off;
>  
>  	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
>  	mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
> @@ -607,11 +609,11 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
>  
>  	err = st_sensors_init_sensor(indio_dev, NULL);
>  	if (err < 0)
> -		return err;
> +		goto st_magn_power_off;
>  
>  	err = st_magn_allocate_ring(indio_dev);
>  	if (err < 0)
> -		return err;
> +		goto st_magn_power_off;
>  
>  	if (irq > 0) {
>  		err = st_sensors_allocate_trigger(indio_dev,
> @@ -634,6 +636,8 @@ st_magn_device_register_error:
>  		st_sensors_deallocate_trigger(indio_dev);
>  st_magn_probe_trigger_error:
>  	st_magn_deallocate_ring(indio_dev);
> +st_magn_power_off:
> +	st_sensors_power_disable(indio_dev);
>  
>  	return err;
>  }
> diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> index bacdf6c..4b01b19 100644
> --- a/drivers/iio/pressure/st_pressure_core.c
> +++ b/drivers/iio/pressure/st_pressure_core.c
> @@ -588,13 +588,15 @@ int st_press_common_probe(struct iio_dev *indio_dev)
>  	indio_dev->info = &press_info;
>  	mutex_init(&press_data->tb.buf_lock);
>  
> -	st_sensors_power_enable(indio_dev);
> +	err = st_sensors_power_enable(indio_dev);
> +	if (err)
> +		return err;
>  
>  	err = st_sensors_check_device_support(indio_dev,
>  					ARRAY_SIZE(st_press_sensors_settings),
>  					st_press_sensors_settings);
>  	if (err < 0)
> -		return err;
> +		goto st_press_power_off;
>  
>  	press_data->num_data_channels = press_data->sensor_settings->num_ch - 1;
>  	press_data->multiread_bit = press_data->sensor_settings->multi_read_bit;
> @@ -615,11 +617,11 @@ int st_press_common_probe(struct iio_dev *indio_dev)
>  
>  	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
>  	if (err < 0)
> -		return err;
> +		goto st_press_power_off;
>  
>  	err = st_press_allocate_ring(indio_dev);
>  	if (err < 0)
> -		return err;
> +		goto st_press_power_off;
>  
>  	if (irq > 0) {
>  		err = st_sensors_allocate_trigger(indio_dev,
> @@ -642,6 +644,8 @@ st_press_device_register_error:
>  		st_sensors_deallocate_trigger(indio_dev);
>  st_press_probe_trigger_error:
>  	st_press_deallocate_ring(indio_dev);
> +st_press_power_off:
> +	st_sensors_power_disable(indio_dev);
>  
>  	return err;
>  }
> diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
> index 78a1934..91d5f68 100644
> --- a/include/linux/iio/common/st_sensors.h
> +++ b/include/linux/iio/common/st_sensors.h
> @@ -278,7 +278,7 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
>  
>  int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
>  
> -void st_sensors_power_enable(struct iio_dev *indio_dev);
> +int st_sensors_power_enable(struct iio_dev *indio_dev);
>  
>  void st_sensors_power_disable(struct iio_dev *indio_dev);
>  
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux